Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this 72-inch long, two-inch wide steel piano hinge. Now this hinge will provide sturdy, continuous support along the length of your cabinet, your door or your panel. This is great for oversized doors, trailer doors, and entrance doors. And what's nice is this hinge will provide more support than multiple small hinges.
The continuous design of this hinge will reduce stress on the hinge that has heavier doors. And this does rotate 270 degrees just wanna zoom in and show you that. So you can see right now, it'll go back about 90 degrees this way. And if you fold it the other way to go about 180 degrees. So that'll give you a total of 270 degrees for full opening and closing motion.
This is a nice durable steel construction. It has enough un-plated mill finish to it, and this is a weld on or bolt on installation. Now to bolt it on you do have to drill holes into the hinge. This part is made in the USA- give you a few dimensions on this. First we're going to measure the overall length.
And if we go from one end all the way to the other end is right at 72 inches or six feet in length. The width on it- Now the width on it will be measured in the open position. So the widest point, when it's open, if we put a ruler on that, you can see it's going to be right at two inches for the width. It's the open width. And a knuckle length.
Each one of these little sections here as a knuckle. So the length on those is going to be right at half an inch. And then the pin diameter, the size of the pin that goes through this hinge is a three sixteenths inch diameter pin. But again, you can see how it would close and open. But that should do it for the review on the 72 inch long, two inch wide steel panel, piano hinge..
Average Customer Rating: 4.8 out of 5 stars (385 Customer Reviews)
Great for cabinets, toolboxes, and panels in your enclosed trailer, this piano hinge provides uninterrupted support for your door. The hinge rotates 270 degrees and contains no pre-drilled holes, so it can be welded or drilled to match your setup.Everything is working as it should. Way better than the aluminum ones that where on thereForsure.
Sturdy product
100 percent as descr ibed
Shouldn’t use USPS to deliver your products. I waited four days after the expected delivery date and finally went to the post office. Woman said “yeah he wouldn’t have ever delivered it, it’s too long for his little postal Jeep.
Work great. More sturdy than piano hinges on concession trailer.
Very impressed with the quality this hinge. I had to repair my FlipBak tonneau cover. This hinge will provide superior security over the original piece of rubber that those tonneau covers use as a hinge.
Thanks for the excellent customer service.
I am using this as a vertical door hinge for my shed. It is working perfectly. The heavy shed door no longer sags. The hinge operates smoothly. It was probably overkill but I don't like having to fix things more than once.
3 stars, due to packaging. Ordered 3 inch by 72 inch piano hinge. Packaging tube arrived without hinge, cap on end was missing.Went to post office to see if they seen it and they did. Brought it home and is in working condition.
The hinge was perfect and was exactly what I needed. The customer service was second to none! They upgraded my regular ground shipping to 3 to 5 day at no additional charge. I wish the other companies I do business with had the customer service like etrailer.com does.
used cobalt drill bit drilled 4 holes in hinge on corners with paper to keep door space for future paint ,drilled holes in hinge only just touch wood ,undid 4 screws ,recessed wood with bur thing ,punched stainless hinge into wood, screwed in screws near flush ,very clean super price and strong ,thank you
It arrived on time perfectly protected with no damage. This was a last minute project that was dropped on me and I was scrambling to to find the components. etrailer was easy to scroll through and easy to complete my purchase.
Very well constructed as we needed a heavy duty weld on hinge and this was the only hinge in the market to meet our application.
Fast service great feedback and properly packed for safe delivery as we live in an industry where what arrives and in what condition is always an unknown.
I highly recommend this vendor. I will be purchasing more products from their large selection.
2 thumbs up!!
Just what I was looking for!
I plan to hinge my shop stairs,pictured in the attached photo.
Nice heavy duty hinge. We used them as a replacement for the rusted light duty hinge on our custom hunting camp trailer. Received them quickly and in time to installed before the 2022 deer season.
I tried ordering this same hinge through a hardware supplier and they couldn't get it. I found this on a web search and couldn't believe E-trailer had it in stock, it came within two days. Happy to get this project done!
Good hinge. Fast shipping
Product as described, good quality and function
I
Highly recommend. This is a very heavy duty hinge.
This is the item I needed and it was sent out and received very fast, very pleased with the product here for my enclosed race trailer to help with my need after I had upgraded my trailer floors & ATP ramp door flap. Item was just as described in the video upon ordering off the website.
Thanks
Great quality but your shipping method sucked. USPS is a disaster, delivery time is unacceptable.
Great product. Has held up great with no issues.
Was very surprised with the quality of the hinge for the price. etrailer went above and beyond with packaging and shipping. Was worried that hinge would be bent in shipping because of it size but it was packed in a really strong tube. Product arrived 2 days before the estimated date. Will definitely be a repeat customer. I’m glad I stumbled upon etrailer and look forward to using them a lot more for my business. Thanks etrailer.
Worked out great for my trailer build and made thing a lot easier for making a heavy duty tool box door in the v of a tag trailer
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
8/14/2023
I used this hinge for the bed platform. My 400 pound grandson sleeps on this bed every trip Great product