Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
(53 reviews)
Price: $25.71
In Stock
Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
Item # C82CR
Retail:$45.35
Our Price: $25.71
You Save: 43%
In Stock
- All Info
- Reviews (53)
- Q & A (0)
- Photos
CURT Straight Tongue Trailer Coupler - C82CR
- 2 Inch Ball Coupler
- 2 Inch Channel
- Standard Coupler
- 3500 lbs GTW
- Bolt-On
- CURT
- No Lockout
The QuickPin trailer coupler makes trailer hookup as simple as possible. Just drop the coupler onto your 2" hitch ball and slide in the pin to secure the ball in the socket. No latches involved. Bolts onto a 2" wide trailer tongue.
Features:
- Ball coupler lets you hook up your trailer to your tow vehicle
- Provides connection point for hitch ball
- Innovative design allows fast, hassle-free trailer coupling with just one pin
- No jamming or complicated hinging components prone to wear
- Easier to use than traditional couplers
- Fastens securely with included 1/2" diameter pin and clip
- No adjustments or tightening needed
- Lasso lanyard secures pin to coupler to avoid missing pieces
- Stamped steel construction for dependable strength
- Passes SAE-684 performance testing as a Class 2 coupler
- Compatible with most existing coupler mounting hole configurations
- Protected by a durable black powder coat finish
Specs:
- Application: 2" wide trailer tongue
- Ball size: 2"
- Weight capacity: 3,500 lbs
- Coupler dimensions: 9-5/8" long x 2-1/4" tall
- Diameter of lock pin hole: 1/2"
- Limited lifetime warranty
Notes
- Coupler can only be used with included pin
- Trailer mounting hardware not included
25470 Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
Installation Details
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Alternate product found
- Wrong item was ordered
Customer Reviews
Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs - C82CR
Average Customer Rating: 4.8 out of 5 stars (53 Customer Reviews)
The QuickPin trailer coupler makes trailer hookup as simple as possible. Just drop the coupler onto your 2" hitch ball and slide in the pin to secure the ball in the socket. No latches involved. Bolts onto a 2" wide trailer tongue.by: William 04/29/2024
Perfect for my application. Easy ordering and fast delivery. Quality well made product. Converting auction find from 1 7/8 to 2 inch to be compatible withe ATV and tractor. Pin design is perfect for purposes on my farm.
by: Pierre02/01/2021
The weather was so good at Bowker Lake in Québec, Canada that we took the opportunity to take a little trip in the woods and put to the test the new Curt QuickPin No-Latch Trailer Coupler for 2 "Ball - 2" Channel - 3,500 lbs on my Pulka with a Honda Rancher.
by: Ryan 02/28/2024
Works good. Only thing is the cable that secures the pin to the coupler broke after a few uses.
by: Paul 09/02/2023
Easier to use than traditional couplings for light duty towing. Can't be jammed by dropping onto ball with latch.
by: Mark 02/25/2024
Good quality products, super good service, fast delivery
by: Dennis 10/23/2023
It's great, glad I bought it
by: Craig01/18/2023
Way easier to use then some other couplers that get stuck constantly.
by: Shawn04/09/2022
This coupler rocks! Snug fit, easy to use and low clearance allow me to drop my Honda Element tailgate without contact. Feels more secure than typical latch type, I definitely recommend.
by: Leonard02/22/2023
just what I needed to fix my trailer
by: Brion01/17/2021
Great product. Holes didn’t quite line up with my Canadian trailer. Simple matter to enlarge them a bit with a step up drill bit drilling into the trailer. It was just enough to get the bolts in.
by: David 04/03/2023
Product was just as described. Fast shipping, same great service as usual.
Thanks
by: Mark 09/08/2021
This new design allows a much easier to hookup my trailer. Also allows more flexibility when negotiating rough terrain. I highly recommend this new coupler
by: Robert 05/07/2023
This is simple a works great.
by: Mike04/08/2022
I was concerned that the person who helped me didn't really know if this adapter would work on the trailer I purchased, but he was dead-on. Thank you.
by: John 02/25/2021
Much easier and quicker to connect the trailer to my vehicle.
by: Dan 10/20/2021
perfect hitch for a light duty tow bar
by: Robert04/30/2022
Very pleased
by: Ricky D04/09/2024
by: 11/19/2022
by: Anthony04/28/2021
by: Orville 02/26/2021
by: Robert 05/12/2021
by: Perry 04/07/2023
by: Steven 04/28/2023
by: Rick 05/16/2023
25
52
Show More Reviews
See what our Experts say about this CURT Straight Tongue Trailer Coupler
- Replacement Coupler for Shelby 5111Shelby is no longer in business and there are no longer any type of repair kits for their couplers, so the best option we can offer is a new coupler with the same fit and capacities. Based on my research, the Shelby 5111 coupler had a 3,500 lb capacity, fit a 2" trailer channel and worked with a 2" ball so I recommend simply replacing the coupler with either of the following two options: - Channel Tongue Trailer Coupler # CT-3001-Z - Curt QuickPin No-Latch Trailer Coupler # C82CR I...
view full answer... - Will the Curt QuickPin No-Latch Trailer Coupler for 2" Ball Work with 3" Wide TongueThe Curt QuickPin No-Latch Trailer Coupler for 2" Ball part # C82CR is designed for a standard 2" wide x 3" tall trailer tongue. That said, it will work with any tongue size so long as it's 2" wide. It will not work with a 3" wide tongue. The correct version for a 3" wide trailer tongue is the Curt QuickPin No-Latch Trailer Coupler for 2" Ball part # C54UR. The height also does not matter for this coupler either.
view full answer... - What's The Mounting Hole Dimensions On Curt QuickPin Coupler C82CR?On the Curt Coupler # C82CR the two mounting holes are 3" apart on center which you can see in the below diagram. I included a video of AJ installing this coupler for you to check out as well.
view full answer...
- Replacement Trailer Tongue Coupler For Detail K2 Utility TrailerThe coupler on the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 is for a 2" wide frame and has 3" on center bolt holes. The Curt QuickPin No-Latch Trailer Coupler # C82CR will bolt in place of the coupler that comes with the kit. It does not use a latch but will instead use a pin to hold the trailer onto the ball. I recommend the Lock N Roll Articulating Channel Tongue Trailer Coupler # 336TS528. This coupler will reduce eliminate the slop of the ball type connection giving...
view full answer... - Lock For Curt QuickPin No-Latch Trailer Coupler for 2 Inch BallThere are a couple of different ways you can lock the Curt QuickPin No-Latch Trailer Coupler for 2" Ball, either with a standard coupler lock, or you can use a 1/2 inch diameter hitch pin lock, since that is the same size as the pin and clip (though you should always use the pin and clip that come with the coupler when towing and not a lock). So to lock it you can use any of the following options, depending on what you prefer: - etrailer Trailer Coupler Lock for Flat Lip 1-7/8" and 2"...
view full answer... - How to Use Trailer Coupler On Smaller Trailer ChannelThere isn't a trailer coupler for a channel any smaller than 2 inches. You could still use a standard coupler for a 2 inch channel, but what you would have to do is fabricate and weld on spacers to the tongue in order to mount it. If you did that you would be able to use a standard channel coupler like the Channel Tongue Trailer Coupler - 1-7/8" Ball # CT-2001-Z or the Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR. I have added a link below to our entire selection of trailer...
view full answer... - Will The Curt QuickPin No-Latch Trailer Coupler, # C82CR, Work With Polar HDM 1400 Mesh TrailerYes, you will be able to use the Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs, part # C82CR, with the Polar HDM 1400 Mesh Cart Trailer. I have included a video review link below.
view full answer... - Solution for Trailer with Shelby 5133 Coupler with Broken LatchWe don't have a repair kit for your coupler but we do know that your Shelby 5133 was a 3,500 lb capacity 2 inch ball coupler for a 2 inch wide channel like the # C82CR which you'd be able to replace what you have with.
view full answer... - Coupler For 2" Trailer Channel That Connects to a 2" Hitch BallThe etrailer Channel Tongue Trailer Coupler # CT-3001-Z and Curt QuickPin No-Latch Trailer Coupler # C82CR are currently the only 2" ball couplers we carry that fit a 2" square trailer channel. Bulldog's smallest coupler only fits a 3" channel.
view full answer... - Mounting Hole Spacing For The Curt QuickPin No-Latch Trailer Coupler # C82CR Hey William, The Curt QuickPin No-Latch Trailer Coupler # C82CR fits a 2" wide tongue channel and the mounting holes are spaced 3" apart from center to center. You can pick up the recommended hardware (1/2" Hex bolt - grade 5 qty. 4 and 1/2" Nylock nut - grade 5 qty. 4) at your local hardware store to get it mounted to the tongue.
view full answer... - Replacement 2" Ball Coupler Options For A 2" Wide Trailer Tongue Demco unfortunately doesn't have an EZ-latch coupler for a 2" wide channel so you're left with three options: etrailer # CT-3001-Z (3-1/16 bolt hole spacing) Curt # C82CR (3" bolt hole spacing) Dutton-Lainson # DL13835 (3" hole spacing) Of the three options the Curt # C82CR is going to be the easiest to use since it just has a 1/2" diameter hitch pin to slip through the coupler and lock the ball in place. The only other option would be to have some 1/2" steel plates added to the...
view full answer... - Locking Hitch Pin For The Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR Hi Ed, Yes, the pin # C87ER included with the Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR is 1/2" diameter so you could use a locking hitch pin lock like the Curt # C23517. This locking hitch pin is 1/2" in diameter with a 2-13/16" span to fit the width of the coupler.
view full answer... - Is There a 1-7/8" Trailer Coupler for 2" Channel Rated Over 2,000 LbsThe hitch ball size plays into weight capacity which is why you won't find many 1-7/8" trailer couplers rated over 2,000 lbs. If you need a higher weight capacity you'd have to bump up to a 2" hitch ball using a coupler like the Curt QuickPin No-Latch Trailer Coupler for 2" Ball part # C82CR.
view full answer...
Do you have a question about this Straight Tongue Trailer Coupler?
Info for this part was:
Installed by:
Andrew K
Installed by:
Kathleen M
Written by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Manda E
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.