Locking Hitch Pin For The Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR
Question:
Thank you, that helps. The video for the Curt No-Latch says that there is an option for a locking pin for the 2” and 2-1/2” wide coupler. Is that correct? Thanks again. Ed
asked by: Ed D
Expert Reply:
Hi Ed,
Yes, the pin # C87ER included with the Curt QuickPin No-Latch Trailer Coupler for 2" Ball # C82CR is 1/2" diameter so you could use a locking hitch pin lock like the Curt # C23517. This locking hitch pin is 1/2" in diameter with a 2-13/16" span to fit the width of the coupler.
![Kevin C](https://images.etrailer.com/static/images/catg/people/2455_tn.jpg)
Products Referenced in This Question
Curt Trailer Hitch Receiver Lock - 1-1/4" and 2" Hitches - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Stainless Steel
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Flush Pin
- 2-13/16 Inch Span
- CURT
more information >
Curt QuickPin No-Latch Trailer Coupler for 2" Ball - 2" Channel - 3,500 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 3500 lbs GTW
- 2 Inch Channel
- No Lockout
- CURT
more information >
Replacement Pin and Clip with Lanyard for Curt QuickPin No-Latch Trailer Coupler
- Accessories and Parts
- Straight Tongue Trailer Coupler
- Pins and Clips
- Replacement Lanyard
- CURT
more information >
Product Page this Question was Asked From
Demco Channel Tongue Trailer Coupler - eZ-Latch - Silver - 2" Ball - Bolt On - 10,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 10000 lbs GTW
- 3 Inch Channel
- Auto Latch
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Demco EZ-Latch Coupler For 2" Balls For A Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can Trimax Puck Lock for Trailer Door Hasps be Keyed Alike
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Q&A: Replacement for Shelby 5107 A-Frame Trailer Coupler
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Hub And Bearing Kit For An AL-KO 8460 Hub
- Article: How to Choose a Trailer Hitch Coupler
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Could Timbren Axle Less Kit Be Installed on Truck Bed Trailer Frame
- Q&A: Is One Demco 2 Inch Ball Channel Coupler Safer Than Another
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: How to Measure Your Trailer Wheel Bolt Pattern