Yakima RidgeLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
(145 reviews)
Price: $658.85
In Stock
Yakima RidgeLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y35TB
Our Price: $658.85
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (145)
- Q & A (0)
- Videos (54)
- Photos
Yakima Roof Rack - Y35TB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Ridgeline Towers for Flush Factory Rails - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and fit kit to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your flush rails
- RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
Yakima SightClip 40:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
8000145 Yakima Ridge Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Flush, Factory Side Rails - Qty 4
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8006440 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
Video of Yakima RidgeLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
How's it going, everyone It's Ethan here with etrailer. Today we're going to be taking a look at the Yakima Roof Rack System with our JetStream crossbars and showing you how to install them on our 2022 GMC Sierra. If you're transporting a large amount of items or just large items in general and you don't have room in your bed, or they're just items you'd rather keep out of the cabin of your vehicle, a roof rack system like this is gonna be a good way to do that. The crossbars that we have here are an aerodynamic shape so they taper in the back just to cut down on some of that wind noise and wind resistance. With any sort of roof rack system, you'll get a little bit, but this is nice that it cuts some of that down. Additionally, it does feature this rubberized strip inside this T-track slot, so you can use these roof rack with T-track accessories and there's no need to trim the actual strip to get those on.
As far as the length of our crossbars go, there are a couple of different options as far as length. These are 60", which we found gives us enough room on top and enough overhang. The overhang that we have, we're measuring at 5", which gives you a little bit more room for accessories without being overbearing or sticking over your vehicle too much. With a weight capacity of 165 pounds, these crossbars will do a fine job of storing most of the bigger items that you might need, but something to keep in mind when you are storing those items is are they going to make contact with the top of your roof So we'll just measure from the roof to the bottom of our crossbars. It's about 3 1/2", so if your accessories do have clamps or things that hang onto the crossbars, you wanna keep that measurement in mind.
Additionally, to see how much height we're adding to the top of our vehicle is about 4 1/4", so if you live with these crossfires on your vehicle, that's how much you're gonna be adding to it. Additionally, if you have taller bindings on your skis or things like that, that's a good measurement to keep in mind to see if those will make contact with your vehicle as well. To start the install process, we like to just lay everything out, making sure that we know what everything is and that we have it. So we're going to obviously have our crossbar here, two towers, the covers for the towers, two hooks that'll keep the actual feet in place, two pads for the bottom, and our end caps. Additionally, there is a provided tool and we recommend going ahead and grabbing a fabric tape measure.
They do provide one, but we have our own. We'll start by assembling our towers. First thing, we probably want to loosen this metal plate here. We do that first actually by releasing this security lever. As you can see, it covers it.
If you pull it back, you have access to get in there. So we'll loosen that. And in our case, there are three different steps for the GMC Sierra that we're going to be putting these on. They do recommend setting it to C, but make sure you check the manual and see what's recommended for your vehicle. Now the next step is to get the actual feet on the towers. So ours came with a plastic cover. We just removed that, and making sure that this arrow on the tower is facing out, it just snaps into place. (feet snapping onto tower) And now we can go ahead and slide this onto our crossbar. Because we loosened that metal plate earlier, it should just slide right onto our track like so. Make sure you consult the manual to see the specific measurements for your vehicle, but as you can see, there are little ruler notches on the actual crossbars themselves, so using those will slide the feet to the point where we need it, which is right about here, in our case, and we can get that tightened down. (screwdriver twisting) Once we have our feet on, we can put our end caps back on just like that. As you can see, we already have our first crossbar installed. We got our measurement from the end of our glass windshield here and took it up to the front of the tower. It's going to be vehicle specific, but we have it where we need it in our case. Now we can fit our crossbar onto the roof of our vehicle, trying to do it as carefully as possible. The pads on the bottom should make it a little bit nicer on top of your vehicle, but we'll get it vaguely where we need to be and adjust it. When you actually place the crossbars on top of the vehicle, these feet are nice 'cause they will actually fit in the ridges on top of your roof. Now that we have our crossbars roughly where we need them to be, we'll take a measurement to make sure that the crossbar spread is what's recommended for our vehicle. In our case, it is 32", so we're about there. Just slide this forward a little bit and that's pretty good. Now we'll get clamps installed as well, starting by opening up that security door again, sliding it through, and all we have to do is get our tool through the middle of there and tighten it, probably not all the way just yet. We're gonna have to adjust our other side and we'll probably wanna go back and forth tightening it down just to make sure that one side isn't over-torqued. We've tightened the other side to where we need it to be and this one's about where we need it as well, so we'll close that security gate up and we can fit our racks back, or the end cap back on starting with these cringes down at the bottom and click that in place. Once you've done that, that's basically it. Fairly simple installation, as long as you know where all the pieces are and what they do, but you're ready to hit the road. Overall though, I think that the Yakima Roof Rack System is a sleek and pretty effective roof rack system. I like that the arrow bars will cut down on that wind resistance and I really like that rubberized strip that I don't have to trim. Now, if aesthetics are something that's really important to you, we found that the Rhino-Rack Roof Rack System looks just a little bit sharper, but I like the install of the Yakima Roof Rack System a little bit better, just a little bit easier if you're gonna be taking it on and off a lot, in my opinion, and overall, I think that it's a really nice fit on our 2022 GMC Sierra.
Customer Reviews
Yakima RidgeLine Roof Rack for Flush Rails - JetStream Crossbars - Aluminum - Black - Qty 2 - Y35TB
Average Customer Rating: 4.8 out of 5 stars (145 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Domenick03/06/2024
Placed the order for the rack a year ago. I didn’t like the way it sat on the roof of my vehicle, but because I had already installed it, etrailer customer service refused to take it back. I would’ve gladly paid for the return shipping or some sort of restocking fee, but that wasn’t an option. I’ve had brand new rack and hardware sitting in their original boxes for a year.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Mark 01/11/2024
Great secure product though some written instructions on their setup and installation would be helpful.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: Stephen11/02/2019
Mazda
Received this Yakima roof rack system for my flush-rail 2019 Mazda CX-5 Signature on Thursday, and installed it on Friday.
It’s not the simplest installation I’ve encountered, and I’d had a number of Thule products before. I found the installation “picto-grams” not that helpful. Also the 3.5 newton-meter torque screwdriver provide would not “click”.
It looks great on the Mazda, but took about 4 hours to install - getting the clips in place was an issue ; I got the outer to clip on, only to find the inner had come off its attachment clips- very frustrating.
by: DJ01/05/2022
With exception of getting wrong towers (crossbar vs streamline), installation was fairly painless. Pay attention to measurements during install! Looking forward to the Yakima 16 to be fitted shortly and then ROAD-TRIPPING.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: M10/19/2022
Of all of the many racks I’ve purchased over the years, this, by far, is the worst. Once installed, it is okay, but installing these towers is extremely frustrating. The front and back “clips” fall out requiring multiple attempts. When I contacted Yakima customer support, they acknowledged that they have received complaints about the product. Their solution was to just leave the racks on the car. I asked to be notified when a better product was available but a year later I’ve received no response. If this is the only option available for your vehicle (as it was for mine), then prepare to be frustrated. Otherwise, purchase a different product.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Thomas09/16/2020
I bought both the roof rack and the cage from etrailer! Put everything on myself...easy peasy!
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Chad12/07/2018
Excellent product. These bars are very quiet and look great on our truck. Assembly and installation was straightforward. We've used these bars to secure our large Yakima car top carrier and have traveled on several trips to the mountains and cabin with no issues. I suggest ordering an extra set of end caps as we've lost one in the car wash. However, have had no problems with the bars when going through the car wash.
As always, I GREATLY appreciate the superior product support that etrailer.com provides. They have the best product content on the web, hands down.
by: Beyhan A.02/21/2019
2018 Honda Ridgeline
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The RidgeLine Towers for the Yakima crossbars, along with the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
by: Phillip09/29/2021
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
by: Susan09/28/2022
It's a great roof rack, but the paint is getting all scratched off...probably from sliding kayaks up onto it. I hope it doesn't rust. So far no signs of that.
by: Bruce06/12/2019
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
by: Lisa04/12/2019
I loved how easy these towers were to install. Took less than 30 mins total. They look nice and feel very sturdy. I am looking forward to loading the Kayaks up and getting out on the water next weekend.
by: Andrew08/01/2023
Great! Easy to install!
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Robert 01/06/2022
The bars are sturdy, aerodynamic and super strong. I bought this to fit a Yakima Skybox 16 and these worked great. The measurement ticks on the bottom assist with getting the box centered and have a great gasket system that you fit yourself. These mounted pretty quick even in 20 degree weather.
etrailer sold this as a set based on my car and every piece was great and a perfect fit. Communication and tracking info was great and they delivered it a day before promised.
25
412
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Compatibility of the Yakima # Y00426 and # Y33TR with Sunroof on a 2021 Ford Bronco SportWhile we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle. From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your...
view full answer... - Roof Rack Recommendation for a 2021 Toyota Highlander with a Naked RoofFor a great-quality roof rack for your 2021 Toyota Highlander with a bare roof, I recommend the following setup: - Yakima JetStream Crossbars - 60" Long - Qty 2 # Y00426 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06153 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06132 - Yakima Same-Key Lock Cores # Y07204 With this roof rack setup, you will receive 165 pounds of maximum...
view full answer... - Recommended Roof Rack and Kayak Carrier for 2021 Toyota TundraBecause they're a lot more quiet than square or round profile crossbars, I'd recommend a roof rack with aero-style crossbars. I really like the quality and the ease of use provided by the Yakima JetStream roof rack, which can be assembled from the following parts: • JetStream 60 Inch Aero-Style crossbars part # Y00426 • BaseLine roof rack towers, part # Y28TR • Vehicle specific fit kit # Y06121 • Vehicle specific fit kit # Y06129 A lock kit is available separately as part # Y07204 To...
view full answer... - Can I Use The Thule Hullavator On Factory Crossbars With No Overhang?The Thule Hullavator # TH898 will require crossbars that overhang the towers by 4' - 8". There is not any kind of adapter that is made for this purpose. Your best bet will be to replace the factory crossbars with aftermarket crossbars that have some overhang. Since your 2023 Subaru Outback already has the factory installed rails running front to back, you will be able to mount crossbars using these rails. I recommend the Yakima JetStream Roof Rack, which will consist of the following parts: Yakima...
view full answer... - Load Assist Kayak Carrier for 2012 Hyundai Sante Fe With Factory Roof RackI have a couple solutions for you but the Thule Hullavator # TH898 will not work with your factory roof rack on your 2012 Hyundai Sante Fe. The carrier requires 4"-8" of crossbar overhang from the support tower. This is to provide enough clearance for the lift assist to clear the side of your 2012 Hyundai Sante Fe. You can swap out your factory roof rack for a roof rack system that has an overhang that will work with the carrier. The Yakima Jetstream Roof Rack could get you the overhang...
view full answer... - Correct Yakima Crossbar Length for 2016 Ford Edge With Panoramic Glass RoofI checked with Yakima, and the correct length of crossbars for your 2016 Ford Edge is 60 inches; the 50 inch length will be too small. For your '16 Edge with a panoramic glass roof, the Yakima roof rack system that fits is made up of the following parts: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06102 - BaseClip Fit Kit # Y06139 - Same Key System Lock Cores (Optional) # Y07204 I have added links to video reviews...
view full answer... - Best Roof Rack For Hauling Two Angler Kayaks On A 2018 Jeep Grand CherokeeSometimes the manufacturers rate their roof racks for less than what your vehicle can handle. For some racks like the Yakima JetStream Roof Rack System using the Jetstream Crossbars # Y00426, the BaseLine Towers # Y28TR and the BaseClip Fit Kit # Y06121 you will have a weight capacity of 165lbs which should be right at what your roof can handle. So, get the Yakima JetStream Roof Rack System and for your 68lb Kayaks, I suggest getting the etrailer J-Style Kayak Carrier - Folding - Universal...
view full answer... - Roof Rack for 2005 Toyota 4Runner to Carry Yakima SkyRise HD TentThe Yakima SkyRise HD part # Y07437 needs to attach to an aftermarket roof rack with top channels in like the Yakima JetStream roof rack part # Y00426 and # Y00147 that is a confirmed fit for the roof of your 2005 Toyota 4Runner with raised rails.
view full answer... - Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked RoofI checked with the manufacturer for you and can confirm that the Yakima roof rack is absolutely a fit for your 2021 Kia Telluride with a bare roof. It will work and fit perfectly on your Telluride to allow you to carry whatever cargo you need. The rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06165 - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Item...
view full answer... - Wireless Observation Camera That Does Not Require Installing Monitor on VehicleWe do have a wireless camera system that use your smartphone or iPad as the display so there is no need to mount a monitor in the passenger compartment. The Rampage Wireless Backup Camera # RA7710 features a rechargeable battery-powered camera with a magnetic mount for quick and easy non-permanent installation when you need it. This means no wiring and that you can put the camera just about anywhere you need it. The Rampage has a 300-foot transmission distance too so it will work fine...
view full answer... - Will the Thule Portage Canoe Carrier Work on Yakima Jet Stream CrossbarsYes, the Thule Portage Canoe Carrier part # TH819 will work with Yakima JetStream Crossbars like part # Y00426. There are very few crossbars that the Thule Portage Canoe Carrier won't work on, usually only factory crossbar have issues but only some.
view full answer... - Recommended Roof Rack to Use Thule Hullavator # TH898 on a 2017 Jeep Grand CherokeeI'm so sorry to hear about your situation! From the looks of your previous crossbar order, you ordered the Thule AeroBlade Edge Roof Rack TH7602-TH7602. While we definitely have roof rack options for you to work with a Thule Hullavator # TH898, the AeroBlade Edge crossbars do not provide you the required 4-8 inches of crossbar overhang past the feet required for the Hullavator to function. This is because the AeroBlades do not extend past your rails. Judging that you purchased AeroBlades,...
view full answer... - What Length of Yakima JetStream Crossbars is Recommended for 2012 Subaru Forester Roof RackFor your 2012 Subaru Forester Yakima recommends the 50 inch Jetstream bars if you have the raised roof rails. You'd need the roof rack components # Y00425 and # Y33TR to complete the rack. If instead you don't have roof rails you'd still need 50 inch Jetstream bars with the components # Y00425, # Y53TR, and # Y00233 and you'd be set! I attached an install video that shows a Yakima JetStream roof rack installed on a similar Subaru Forester for you to check out as well.
view full answer... - Compatibility of Thule Upride Bike Rack with Yakima JetStream Roof Rack CrossbarsThe dimensions of the T-slot are consistent between Thule, Yakima, Rhino Rack, Inno, Malone and most of the other major players. Your Thule accessories that are designed to mount in the slot or channel in the top of the crossbar will indeed be compatible with the Yakima 60 inch # Y00426 crossbars. Yakima confirms that the 60 inch crossbar along with the # Y33TR TimberLine towers will indeed work on your 2012 Toyota 4Runner Trail. I've linked you to our Roof Rack help articles.
view full answer... - Will Two Bikes and a Kayak Fit on a 2019 Subaru Forester Factory Roof RackIf you were to upgrade to an aftermarket roof rack then I believe you would be able to fit two bikes and a kayak on top of your 2019 Subaru Forester but not with the factory roof rack. In order to upgrade, I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y53TR, and part # Y00248 which actually replaces the factory roof rack. The Yakima JayLow Kayak Carrier part # Y04073 along with two of the Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103 would then allow...
view full answer... - Recommended Roof Rack to Fit 2 Sets of the Thule Hullavator on a 2013 GMC TerrainSince the Thule Hullavator Pro Kayak Carrier # TH898 requires about 31" of crossbar space, the 53" WingBar Evo bars # TH711400 that you referenced are not long enough to accommodate it. The Thule aero bars also have limited mounting space on the underside so you wouldn't be able to go with larger crossbars but we do have an alternative solution for longer crossbars. Yakima has their JetStream bars which are comparable to the WingBar Evo bars and they have a strip that runs the full length...
view full answer... - Recommended Roof Rack And Ski Carrier For 2017 Acura RDX With Naked RoofThe roof rack I recommend for your 2017 RDX is the Yakima Jetstream roof rack. This roof rack uses Black aerodynamic aluminum crossbars that are designed to dramatically reduce wind noise and vibration, and also reduce drag so it helps with fuel efficiency. This roof rack has a 165-lb weight capacity so 4 sets of skis will be no problem. Installing this roof rack will not affect the warranty of your Acura. For this roof rack you will need to order: part # Y00426 part # Y28TR part # Y06148 part...
view full answer...
- Options for Carrying 4 Step-Thru E-Bikes with FendersGiven the weight and style of your e-bikes, there is not a 4-bike rack that can accommodate all 4 bikes at the same time. I have included a couple other ways to potentially carry your 4 bikes. I would start by putting the (2) Lectric 2.0 bikes on a 2-bike rack because they are the heavier bikes between the Lectric 2.0 (64lbs., 57lbs. with the batteries removed) and Aventon Pace 350 (49lbs., I could not find battery weight information to know how much they weigh with the battery removed). I...
view full answer... - Does Yakima Jetsream Roof Rack Fit 2020 Chevy Silverado 1500 Crew Cab New BodyYes the Yakima Jetstream roof rack part numbers # Y00426, # Y28TR, and # Y06110 is a confirmed fit for your 2020 Chevy Silverado 1500 crew cab new body style!
view full answer... - Roof Rack for 2011 Ford F-150 to Carry Two Thule Hullavator Kayak CarriersSince the max crossbar width the Thule Hullavator part # TH898 can take up is 28-1/2 inches for a roof rack that fits your 2011 Ford F-150 that would work great is the 60 inch bar width Yakima Jetstream roof rack part numbers # Y00426, # Y00146, and # Y06168 which the Hullavator can fit into the top channels of and would easily accommodate both racks. This will install on the roof of the truck though. If you'd prefer a solution for the cap let me know.
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Roof Rack for 2020 Toyota Highlander to Carry Thule Motion XT XL Cargo BoxYes, the Thule Motion XT Roof Cargo Box part # TH629806 that you referenced does fit the Yakima Jetstream roof rack that is a confirmed fit for your 2020 Toyota Highlander with flush mounted roof rails: JetStream Crossbars # Y00426 BaseLine Towers for Yakima Crossbars # Y00146 Landing Pad 28 # Y06153 Landing Pad # Y06132
view full answer... - Roof Rack that Can Fit Tracks of Pace Edwards UltraGroove for 2022 Ford F-250The Pace Edward UltraGroove Tonneau cover part # PE87QJ for your 2022 Ford F-250 long bed has tracks that are basically the same as the tracks on campers that were designed for roof racks. To add a set of crossbars to these tracks I recommend the Yakima 60 inch JetStream Bars # Y00426 along with the Landing Pad # Y00221 and Towers # Y00148 to attach them to the tracks. This will give you a set of aero shaped bars that are very high quality and quiet that also have channels on the top of...
view full answer... - Long Crossbar Roof Rack Recommendation for 2020 Honda Pilot with Naked RoofFor your 2020 Honda Pilot with a naked roof the roof rack we have with the longest crossbars is the Yakima Jetstream rack part # Y00426, # Y28TR, and # Y06152. This gives aerodynamically shaped bars that are 60 inches length which will work really great on your 2020 Honda Pilot. I attached a picture of what this looks like installed as well as an install video as well.
view full answer...
- Recommended Roof Rack, Kayak Carrier, & Roof Bike Rack For 2017 Hyundai TucsonYes, I will be happy to help with bike and kayak carrier recommendations that will fit your Yakima CoreBar Crossbars # Y00421, RidgeLine Towers for Yakima Crossbars # Y00145, RidgeClip Fit Kit for Yakima RidgeLine Roof Rack Towers # Y06017 on your 2017 Hyundai Tucson. Yakima JayLow Kayak Carrier w/ Tie-Downs J-Style or Post Style # Y04073 will work with your Yakima roof rack with no adapter needed. The maximum crossbar dimensions are 3-1/2" x 1-11/16" and the minimum crossbar spread is...
view full answer... - Recommended Roof Rack for 2017 Kia SorentoI do have a solution for you, however the Yakima Claws with Pin Adapters # Y8880201 are not a confirmed fit for your 2017 Kia Sorento. As long as your Sorento has flush mounted rails that run front to back, I recommend the Yakima Roof Rack that consists of # Y00425 for the two 50 inch JetStream Crossbars, # Y00145 for the RidgeLine Towers and # Y06013 for the RidgeClip Fit Kit. This a great system that includes aerodynamic crossbars that will greatly reduce wind noise when driving with...
view full answer... - Recommended Aero Crossbars for a 2023 Volkswagen ID 4 With Factory RailsIt looks like to mount the Yakima JetStream Crossbars # Y00425 to your 2023 Volkswagen ID 4 you're going to need the RidgeLine Towers for Yakima Crossbars # Y00145 with the RidgeClip 35, but the RidgeClip is not available anymore. Instead, I'd recommend going with the Thule WingBar Evo Crossbars # TH711300, with the Evo Flush Rail Feet for Thule Crossbars # TH710601, and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet # TH28ZE. These crossbars are identical to...
view full answer... - Roof Rack Recommendation for 2019 Subaru Outback Wagon for Roof Top TentA 60 inch crossbar spread is very wide and won't be possible on your 2019 Subaru Outback Wagon with any roof rack out there. That wide of a spread is much wider than basically anything you'll find with exception of maybe some truck bed rack options. The standard spread for your vehicle is right at 41 inches which is a compatible figure for basically all roof top tents that were intended for vehicle applications. For a roof rack the Thule Wingbar Evo part # TH711220, # TH710601, # TH186047...
view full answer... - Which Yakima Roof Rack Setup Fits 2014 BMW X5 with Flush RailsYakima recommends their Ridgeline towers # Y00145 with their fit clips # Y06010 for your 2014 BMW X5 with flush rails. Then for crossbars the JetStream bars part # Y00426 are a really great option for an aero shaped crossbar.
view full answer... - What Landing Pad Fits Yakima Ridgeline Towers to 2011 Lexus GX 460For the Yakima Ridgeline Towers part # Y00145 that fit your 2011 Lexus GX 460 the correct LandingPad is the number 30 which is part number # Y25ZR. I confirmed this with Yakima.
view full answer... - Recommended Roof Rack to Clear Moonroof on 2015 Hyundai Santa Fe GLSFor your application I highly recommend the Yakima JetStream roof rack. This consists of the 60" # Y00426 JetStream Crossbars, the RigdeLine Towers # Y00145 and Fit Kit # Y06015 since you have flush rails on your 2015 Hyundai Santa Fe GLS. I really like the Yakima roof racks because they have slight adjustments in the towers which give them the best fit for any vehicle that they fit. If you check out the attached photos that Yakima took of this roof rack on a 2015 Hyundai Santa Fe with...
view full answer...
- Carrying Surfboards on a 2017 Mini Clubman S ModelYou have two options for the 2017 Mini Clubman S Model for roof mounted surfboard racks. The first option is a targeted, single purpose use rack. For this, I recommend the SeaSucker Surfboard Carrier, part # 298-BX1806. This innovative rack series uses vacuum cup mounts to secure a rack temporarily to the roof of your vehicle, and is able to support 1 surf board. It's not recommended to carry two surfboards on one of these carriers as it can cause the mount to fail. That being said,...
view full answer... - Best Roof Rack for a 2020 Hyundai Tucson With Flush Side RailsThe best option we have for a 2020 Hyundai Tucson is going to be the Yakima JetStream Crossbar System part # Y00425, part # Y00145, part # Y06017. This system comes with everything that you need so there is no need to piece different parts together. The aero shaped crossbars are going to look much sleeker than the square crossbars and they will be much less noisy. Unfortunately, there is no way to use old square crossbars because the mounting feet required for them have been discontinued...
view full answer... - Recommended Roof Rack and Kayak Carrier for Flush Mounted Rails on 2014 Lexus GX 460We can help you find the parts you're looking for, and really, if you're using a set of crossbars with T-slot mounting paired with accessories that mount in those channels the clearance from the roof won't be a factor. With that said, the Inno kit you mentioned would potentially work, but I do have something that has a bit taller towers to give you some extra clearance from the roof. I recommend using the Yakima Roof Rack for 2014 Lexus GX460 using parts # Y00425, # Y00145 and # Y28FR....
view full answer... - Is Thule Hullavator Pro Kayak Carrier Compatible with OEM Roof Rack on 2018 Hyundai KonaIf the current crossbars on your 2018 Hyundai Kona can be adjusted so that they stick out past the legs of the roof rack 4" - 8" and they are round, square, aero or elliptical with top channels then you won't have to change out a thing to use the Thule Hullavator Pro # TH898 on your 2018 Hyundai Kona. In the case that your crossbars aren't long enough I recommend installing the Yakima JetStream roof rack system because you can upgrade the bars so that they are long enough for your application....
view full answer...
- Fitment of 2 Rhino-Rack Kayak Carriers # S512-S512X to Transport 4 Kayaks on a 2022 Hyundai PalisadeYes! You can use 2 sets of the Rhino-Rack Kayak Carrier # S512-S512X to transport 4 kayaks on your crossbars. Since one of these sets takes up roughly 20" of crossbar space, you need to have al least 40" of usable crossbar length on your roof rack to accommodate 2 of the # S512-S512X. You do not need to worry about additional straps because the carriers come with all the straps you need. If you need a compatible crossbar system with the length you need, the parts you need depend on if...
view full answer... - 2016 Lexus GX 460 Flush Mounted Rails Fit KitFor your 2016 Lexus GX 460, you will need the Landing Pad 30 for Yakima SkyLine And Control Towers - Qty 6, part # Y25ZR, and not a RidgeClip. This kit works for Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 part # Y01156. You will also need the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part # Y03541. The last thing you will need is the Yakima RidgeLine Towers For Yakima Crossbars part # Y00145. This rack will have a weight limit...
view full answer... - Which Length Crossbars for Carrying Bikes, Kayaks and a Cargo Box on 2019 Mercedes Benz GLC 300You could certainly mount two bikes using racks like the # Y02103 FrontLoader and a kayak using a carrier like the # Y04073 JayLow or two bikes with a cargo box like the # Y07192 RocketBox Pro as well as a cargo box and a kayak on a 50 inch crossbar. I've confirmed the fit with Yakima. The Yakima JetStream rack recommended for your vehicle would assemble using the following parts: The JetStream 50 inch crossbars, part # Y00425 RidgeLine roof rack towers, part # Y00145 Vehicle specific...
view full answer... - Roof Rack for 2018 Lexus GX 460 with Flush Roof BarsThe Yakima Jetstream roof rack part number # Y00425, # Y00145, and # Y28FR is a confirmed fit for your 2018 Lexus GX 460 with flush bars and would be a great option. This is a very high quality roof rack with aero shaped bars that have channels on top of them that allow for easy install of rooftop carriers.
view full answer... - What Flush Crossbar System will Work with My Factory Flush Rails on My 2022 Kia Telluride?I have a great solution for you that will eliminate a lot of overhang on your vehicle. Unfortunately, we do not have a crossbar system that completely eliminates the overhang over the feet. However, for a great system that has the least amount of overhang available, I recommend the following setup: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - RidgeLine Towers for Yakima Crossbars - Flush Side Rails # Y00145 - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine,...
view full answer... - Will the Thule DockGrip Kayak and SUP Carrier with Tie-Downs Fit Rounded Crossbars?The Thule DockGrip Kayak and SUP Carrier with Tie-Downs # TH895 does fit rounded crossbars. However, I cannot guarantee they will fit the bars listed from a third-party site. If you want a definite fit, I recommend the Round 48" CrossBars for Yakima Roof Rack System # Y00408. In addition, you will need: 1. RidgeLine Towers for Yakima Crossbars # Y00145 2. RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 3. RidgeClip Fit Kit for Yakima RidgeLine...
view full answer... - Roof Rack Recommendation for a 2019 Mini CooperSince your 2019 Mini Cooper 2-door has flush rails I recommend the Yakima JetStream system. This is my favorite aero bar because of the SmartFill strips in the T-slots so you don't have to cut the rubber around your accessories. It uses the # Y00425 for the crossbars, the RideLine towers # Y00145, and RidgeLine fit kit # Y06009. You can also add locks to the system using part # Y07204. I've linked review videos of the crossbars for you. I've also attached a link to the entire selection...
view full answer... - Roof Rack Recommendation for a 2016 Kia Sorento with Flush RailsFor your 2016 Kia Sorento with factory flush rails you would want the Yakima roof rack that consists of part numbers # Y00408, # Y00145, # Y03536 and # Y06013.
view full answer... - 2021 Lexus NX 300H Roof Rack RecommendationI do have a roof rack that will fit your vehicle, unfortunately it will not include the Rhino-Rack legs you attached to your question. I checked with Rhino Rack today and I was told that this rack is not a fit for your vehicle. Instead, I recommend a Yakima roof rack. It comes with the crossbars, the towers/feet/legs, and a fit kit that is vehicle specific. I recommend the Yakima option, it consists of the following; Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2,...
view full answer...
- Best Roof Rack Recommendation for 2016 Audi SQ5For your 2016 Audi SQ5 the best roof rack we can recommend is the Yakima rack part numbers # Y00425, # Y00145, and # Y06011. Yakima racks are among the highest quality racks around and this one is a custom fit for your vehicle. It has aero shaped bars which would give you the least wind noise and best possible fuel mileage.
view full answer... - Recommended Roof Rack for Roof Mounted Tent on 2017 Kia SportageAccording to Rhino Rack, their available roof rack for your 2017 Sportage that uses the # RRSX023 roof rack feet isn't rated for a roof top tent. The good news is that Yakima has a rack that would work. The rack would consist of the following parts: 50 Inch CoreBars, part # Y00421 RidgeLine Towers, part # Y00145 RidgeClip fit clips, part # Y06021 The rack would have a 600 lb static capacity (while the vehicle isn't in motion) which would be perfect for a roof mounted tent.
view full answer... - Recommended Roof Rack for a 2019 Mini Cooper Hardtop CoupeI would be happy to help you choose a roof rack for your 2019 Mini Cooper Coupe! If you have the flush mount rails that run from the front to the back of your roof then I recommend going with the Yakima JetStream roof rack system. This consists of the JetStream Bars # Y00425, the RidgeLine Towers # Y00145, and the Fit Kit # Y06009. The aerodynamic design of the JetStream bars will help to reduce wind noise and drag while the aluminum construction keeps them from rusting. This roof rack...
view full answer... - What are The Differences Between The Yakima SightLine and RidgeLine Towers ?The Yakima SightLine Towers # Y64AR and RidgeLine Towers # Y00145 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks # Y07204 is hidden behind the outer cover on the SightLine where the RidgeLine places the lock on the outside of the tower.
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush RailsTo add a Yakima roof rack to your 2024 Honda CR-V with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Recommended Roof Rack for a 2024 Honda CR-V w/ Flush Rails Yes, we do have the parts you will need and congrats on the new vehicle. To add a roof rack to the flush rails on your 2024 Honda CR-V you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity....
view full answer... - How to Add Crossbars to a 2024 Honda CR-V w/ Flush Roof RailsYes, we do! To add a set of crossbars to the flush mounted rails on your 2024 Honda CR-V, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR
view full answer... - Roof Rack For 2024 Honda CR-V For Two Thule HullavatorsYep, you can go ahead and mount the Thule Hullavator # TH898 to your 2024 Honda CR-V with a roof rack, and 50 inch bars will be long enough for one, but for two Hullavators you need 60 inch bars. For 60 inch bars the only option is a Yakima roof rack due to how they mount to the feet (longer Thule bars simply won't fit). So here is what you can use: - Yakima JetStream Crossbars - 60" Long # Y00426 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit # Y44UR - Thule Hullavator...
view full answer... - Recommended Roof Rack for a 2023 Honda CR-V w/ Flush Rails To add a Yakima roof rack to your 2023 Honda CR-V with flush rails you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. A great perk...
view full answer... - Parts Needed to Add Yakima RoundBar Crossbars to 2023 Honda CR-VIt sounds like you currently have the Yakima RoundBar Crossbars # Y00408 and you want to mount them on your 2023 Honda CR-V. To complete the roof rack you will need the following: -SightLine Towers for Yakima Crossbars # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR These parts will allow you to use your existing RoundBar crossbars on your vehicle. Once...
view full answer... - Towers for Yakima RoundBar on 2024 Honda CR-V HybridThere are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
view full answer... - Roof Rack Recommendation for a 2023 Honda CR-V with Flush RailsThule currently (March 2023) doesn't have a roof rack fitment for your 2023 Honda CR-V but I do have an alternative option for you through Yakima with their SightLine System: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y44UR - Lock Core Kit # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than happy to make an additional recommendation for you!
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.