Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked Roof

Question

Question:

Hello, We recently purchased a 2021 Kia Telluride LX but did not know that it has no option for installing permanent roof rails in order to mount crossbars and a rooftop carrier. Can your product be installed, and does it work/fit on a 2021 Kia Telluride LX bare roof? We are hoping that your product will indeed solve our problem! Thanks!

asked by: K M

0

Expert Reply:

I checked with the manufacturer for you and can confirm that the Yakima roof rack is absolutely a fit for your 2021 Kia Telluride with a bare roof. It will work and fit perfectly on your Telluride to allow you to carry whatever cargo you need. The rack is made up of the following parts:

- Yakima JetStream Crossbars - # Y00426
- BaseLine Towers for Yakima Crossbars # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06165
- BaseClip Fit Kit for Yakima BaseLine Roof Rack # Item # Y06125
- Same Key System Lock Cores (Optional) # Y07204

The lock cores are not required but I do recommend them in order to lock the rack to your Telluride and protect the investment you made in the rack.

Yakima makes very high-quality racks, and the JetStream bars are going to give you a very quiet and strong system to attach whatever accessories you need to carry.

expert reply by: Kyle S

0

Answer 1

The best way to reduce wind noise on a roof rack like what you have is with a fairing like the Yakima part #Y05018 that you referenced. What's really great about this fairing is that unlike other options that are roof rack specific this one has…

view full answer...

Answer 2

The Thule Fit Kit #TH77JV is the correct fit kit for your 2020 Kia Telluride. I called my friends in Thule and they explained that they recently designed and released this kit just for the 2020 and 2021 Kia Telluride, so you're extra special!…

view full answer...

Answer 3

We carry a very handy 2 inch ball mount for this exact application. The part is #D210. The ball mount slides and pins into your hitch and the top receiver will accept 2 inch bike racks and hold them above the ball. The Ball Mount has a 500 lb tongue…

view full answer...

Answer 4

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 8

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 11

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching