Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points
(3472 reviews)
Price: $119.99
In Stock
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points
Item # DK289
Our Price: $119.99
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (3472)
- Q & A (0)
- Videos (6)
- Photos
Rhino Rack Roof Rack - DK289
- Fit Kits
- 4 Pack
- Rhino Rack
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Includes 4 pads and 4 attachment studs.
Features:
- Custom fit kit allows you to mount 4 Rhino-Rack 2500 series legs (sold separately) on your vehicle with fixed mounting points
- Threaded studs screw into fixed mounting points to provide attachment point for legs
- Legs slide onto studs and secure with hex bolts
- Molded-rubber pads are designed to fit the contours of your roof
- Clip onto the bottoms of your roof rack legs
- Protect your roof from scratches and abrasions
Specs:
- Quantity: 4 pads and 4 attachment studs
- Limited lifetime warranty
DK289 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points
Installation Details
Video of Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Rhino Rack Roof Rack Review - 2015 Mazda CX-5
Hey everyone, Charles here at etrailer. And today we're taking a look at the Rhino-Rack Vortex Aero series crossbars with the custom DK fit kit and a 2500 series roof rack legs on our 2015 Mazda CX-5. These cross bars are gonna be a great way of carrying extra gear to and from your destinations and freeing up space in your vehicle. You can carry up to 165 pounds, just make sure you don't exceed that of the crossbars or the weight of your roof. So we have this aerodynamic shape that's gonna improve your drag as well as the vortex Aero strips. They are also gonna reduce drag and wind noise as well.
And with those straps or the strips on the bottom as well where you slide in your legs, it comes included with a plastic lock core on each tower. And these plastic end caps with a lock. All the end caps will be keyed alike, and then all these will be keyed alike as well. So it'll just be two keys and you can also get metal locking cores here at etrailer, just for a better peace of mind. So mounting these at the two closest points where we could, we are going to have a spread of about 42 and a half inches.
The overhang for the rear is gonna be about two and a half inches from the end of the crossbar and not the end cap and in the front, about an inch overhang and the distance from the roof to the bottom of the crossbars in the front's gonna be a little under three and a half and to the top, about four and a half inches. And for the rear crossbars to the bottom of the crossbar, it's about three inches. And then to the top, about four and a quarter inches. And let's go ahead and show you how to install it. Beginning of the installation, I unpackaged everything and set them in their separate groups.
One thing to note for the fit kit here is that they're all gonna be the same number, the M 473 but you're gonna have two twos and two ones. The twos are gonna be for the rear crossbar and the ones are gonna be for the front but you're just gonna take that and snap them into place and make sure you keep the twos together and the ones together, separate from each other. From there, we're gonna go ahead and open the tower like that. And then for our fit kit and our vehicle here, we don't need these two middle parts that it comes with. We're gonna replace those.
So after you wanna unscrew it, little technique I found to make it easier at popping this guy out 'cause it's a little stuck is just use that bolt and push it up and you can just throw these away. Or if you want to keep 'em, you can keep 'em. So over here, these we're in separate bags and so you just want to take one of the screws, this lock washer and then this washer, set that off to the side for now. And then this piece with the curve at top and facing out, we're gonna place it in the back of the tower. Just like that. I'm gonna hold it with my finger so it doesn't fall out. And then taking this piece, I'm gonna insert it into the slot, above the piece that we're holding with our finger from there. Now I'm gonna hold this piece, flip it over and then I can screw in this bolt right here. Set this off to the side and do this for all three towers. That's how it should look. Once all four towers are completed, we can go ahead and just pry our trim pieces off at both sides. What we did is we just took the whole thing off and there are two placements where we can add these screws in. We chose the two closest points and we're just gonna screw the screws in there. And then once we have that, we placed the trim piece on top of that, gave it a little smack and it made an indent so that we drilled right in there, placed it right over the top and just clicked it back in place. Once you removed all the strips from the inside of your crossbars, go ahead and pre-install this. For me, it just makes it easier to just kind of massage them in there. And then for the numbered strips, we are gonna take a look at the instructions I found for our Mazda CX-5. For the front crossbars, I trimmed it to 191 millimeters because we have the Vortex Aero crossbars. For the rear, we trimmed them down to 163 millimeters. And that's what we did right here. Just chopped it right at 163 and slid this in there. And that is going to give us the space we need. So now we can just slide the tower on it. And we know that this is the distance we need to hit those two points on our vehicle. With the leftover insert here, you can go ahead and fill up that gap to reduce any wind noise or drag as well. And then we can cut off the excess right there. Once you have your strips and everything in place, we can go ahead and tighten these down with the included tool. And don't forget to attach your feet. You want the arrow pointing out and these two parts attached to these two bars right here, snaps into place. Now we can go ahead and throw these on our roof. And so whenever we're all lined up, we can go ahead and hand tighten this to reduce any slack and then we'll use the included tool to finish tightening it down. And we're just gonna do the same thing on other side. After you've tightened them down, give it the old shake test. And if the whole vehicle's moving, then you know you're secure. Once everything's secure, we can go ahead and put our caps on and lock them. There we go. And that'll do it for the installation. So overall, Rhino-Rack makes a great product. I like the aerodynamic shape and the Vortex Aero strip bars. If you want, you can get a little bit bigger crossbars or longer I mean, just so that you can have a little bit more overhang so that you can clamp more accessories on the end and still use the rest of your rack as well. But other than that, these are great. And that's gonna do it for our look on the Rhino-Rack Vortex Aero series crossbars on our 2015 Mazda CX-5..
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Arrived Damaged
Customer Reviews
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points - DK289
Average Customer Rating: 4.7 out of 5 stars (3472 Customer Reviews)
This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with fixed mounting points. Legs mount to vehicle with attachment studs. Includes 4 pads and 4 attachment studs.by: I dream of canoes05/22/2023
Pretty nice rack system. Held up to my 90lb canoe no problem. However a piece did fly off on the highway and the "locking" bar end cap can pull off super easy.
The directions were ok. There is some stuff you have to kind of figure out for yourself, mainly the roof trim. I plan to leave the rack on so I drilled theough the trim
by: Robert10/13/2021
Fairly easy installation. Read the instructions thoroughly before hand and get familiar with the parts. Take care when installing mounting studs onto car itself so as not to strip or cross thread them. Once installed they look great.
by: Dick B09/30/2023
It works, yet for the price I expected more precision manufacturing than what I got. Several screw threads had rough spots and there is no way to tighten the nut on the underside of the metal bracket on one leg. It would have been nice for the instructions to mention the wrench for that nut is a 10 mm. And whatever made the designers think the regular user would have the type of torque wrench they require?
by: Michael05/31/2022
Thanks to etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
by: JP07/19/2021
2016 Hyundai Accent
Love it, fast shipping, works great and it looks awesome on my car :)
Jp
7/31/2022
After a year, the rack is still in very top shape, easy to remove for the winter since I use is only for Kayaks in the summer, easy reinstall. One thing that barely need to be mentioned, some the noise is created on the side tips when driving moderately *cough* *cough*, but it is to be expected since it doesnt serve for aerodynamic :
by: Caleb 04/24/2024
Easy to put together and it it has a quality feel
by: Mike T06/22/2023
2012 Mazda 3
Overall , great fit and quality, I ran into noise issues under the vortex rails , however, I cut the measuring guide that is supplied .and cut them to fit into the bottom of the rails . No more noise !!
by: Scott10/20/2022
The rack worked great this summer! I'm not sure the hardware for mounting it to the roof is going to hold up though. The little wrench is slipping in two of the screws and two of the pieces that mount directly to the roof have bent. Can I buy individual hardware?
by: Daniel 08/30/2023
Can't wait to use it for rooftoping my kayak
by: VT guy09/21/2022
I installed using the fixed mount on our 2016 Mazda CX-5. Install, while a bit lengthy, was fairly straightforward when you follow the directions. Solid roof rack that is good for strapping items down, including kayaks/canoe.
Note of caution for 2016 Mazda CX-5 owners! If using fixed mount with a moonroof, the placement is directly over moonroof. It whistles too. Enough to want to keep the moonroof shut.
Again, if using fixed mount on 2016 Mazda CX-5, the space between bars is TOO WIDE for any standard cargo box. Literally nothing out there that will fit. I learned the hard way.
by: Mark03/21/2017
Very nice produce give props to the designer well build nice costume fit to my car easy too install even make the vehicle looks good and thank you to Melissa A at etrailer.com really helpful and awesome ty ten stars.
by: Shelley08/15/2018
I bought this rack for affordability and the fact that it was taller than the antenna fin on the roof. My SUP board fits perfectly up there without needing expensive add on accessories.
The racks were easy to install and look really great.
Shelley
8/29/2019
Its great and was one of the best purchases for my vehicle. I would recommend this to everyone over expensive factory rails and racks.
by: Rich S.03/22/2017
2008 Mazda CX-7
It took me a little while to install because the size numbers for my vehicle were off. But that being said, fast deliver and all the CORRECT parts for my particular vehicle made it a reasonably easy installation. I would order from e-trailer again.
by: SheriM.03/12/2014
Chevrolet Silverado 2500
I received THREE different sets of instructions for the 2500, plus the PDF I was prompted to download...REALLY confusing. I have put together all kinds of furniture, including a 3' x 6' armoire (I am a 5' tall woman), installed paneling and flooring, including carpet in my van, installed bathroom tiles, built closet storage 'out of my head' and from plans, pulled and installed a car radiator/brake and clutch pedals assembly/starter assembly during the course of my 56 years on this earth...but I have never, never, never had such a difficult time making sense of 'too much information'...please go over the instructions and combine what needs to be combined and separate the info for the different vehicles!!!
I am pleased with the outcome as far as the overall sturdiness of the product and I look forward to making use of this system. Besides the assembly instruction difficulties, I am disappointed in the fact that I bought the lock sets for each crossbar, only to see that the insides of each of the legs is exposed... ??? Please consider that in future design 'tweaks'.
by: Rebecca07/08/2019
We love our Rhino Racks! We got them to haul our kayaks around on our crossovers. These were our first racks we've ever installed to a vehicle so we struggled a little bit to figure them out, but once we did figure it out, it was super easy.
Mostly importantly, we initially ordered the wrong rack in error. etrailer was helpful and accommodating and made the return process super easy and helped us get the right product ordered. I would definitely recommend this company and these roof racks.
by: Katherine07/27/2020
Bought this kit for my 2018 Mitsubishi Outlander Sport. The only reason it didn't get 5 stars was because the install instructions weren't clear. To be fair, I should have measured the fixed points on my car on my own rather than relying on the provided spreadsheets. It only took me between 5-10 minutes to make the neccessary adjustments as I was mounting the crossbars and was a pretty easy fix to make. Just frustrating in the heat. Also, when tightening the mounts to my car, I wasn't aware a wrench would be needed and didn't have any available. Had to buy a set, and none of them fit properly (bought in inches, should have gone metric I suppose?)
Other than that, great product. Bought a kayak mount to put on and held it well for a 500+ mile trip. 9/10 would reccomend.
by: Brad04/01/2022
2012 Ford Flex
I called etrailer with some very technical questions on fitment to my 2012 Mazda3. I spoke with Janeth, who worked hard to find answers and ultimately referred me to RHINO RACK to find out the size of the wrench needed.
The Mazda has fixed mounting points and a little stubby wrench must be used to tighten it to the studs on the roof. I wanted to use a ball ended allen key at at angle to save time installing and removing the rack regularly. A 10 mm ball end allen works perfectly with final tightening with the OEM wrench. A ratchet with 10mm allen socket or a flex shaft might also work.
The roof rack mounted easily and rigidly after glancing through the instructions. I got 3" longer crossbars than specced so the mounting charts weren't useful. I mounted the towers with the crossbars loose and tightened them afterward.
Thank you Janeth! You were really helpful.
by: Michelle Brooker10/29/2019
Mazda
Thank you for the follow up. The rhino roof rack system I bought for my Mazda have been great. I have enjoyed hauling my kayaks and has made transportation easy.
by: RALPH B.08/02/2015
2011 Chevrolet Silverado 2500
ORDERED THE RHINO 2500 FOR MY 2011 MAZDA 3. ORDER WAS PLACED ON MONDAY AND ARRIVED THURSDAY. TOOK AN HOUR AND A CIGAR TO GET MY BEARINGS. THE DIRECTIONS COULD HAVE BEEN BETTER BECAUSE I ORDERED THE KIT FOR FIXED ROOF POINTS. MINOR ADJUSTMENTS WERE MADE AND ALL CAME TOGETHER. IWOULD ONLY CHANGE ONE PART, THE MOUNTING BOLT THAT ATTACHES THROUGH THE BASE TO THE ROOF SCREW WOULD BE BETTER IF THE SLEEVE USED FOR THE WRENCH WAS CAST METAL.
OVERALL I AM PLEASED AND AM LOOKING FOWARD TO PUTTING MY KAYAK ON THE ROOF WHILE SAVING WHATS LEFT OF MY PAINT JOB. IWOULD RECOMMEND THIS PRODUCT TO ANYONE.
by: RALPH B.08/02/2015
2011 Chevrolet Silverado 2500
ORDERED THE RHINO 2500 FOR MY 2011 MAZDA 3. ORDER WAS PLACED ON MONDAY AND ARRIVED THURSDAY. TOOK AN HOUR AND A CIGAR TO GET MY BERINGS. THE DIRECTIONS COULD HAVE BEEN BETTER BECAUSE I ORDERED THE KIT FOR FIXED ROOF POINTS. MINOR ADJUSTMENTS WERE MADE AN ALL CAME TOGETHER. IWOULD ONMLY CHANGE ONE PART, THE MOUNTING BOLT THAT ATTACHES THROUGH THE BASE TO THE ROOF SCREW WOULD BE BETTER IF THE SLEEVE USED FOR THE WRENCH WAS CAST METAL.
OVERALL I AM PLEASED AND AM LOOKING FOWARD TO PUTTING MY KAYAK ON THE ROOF WHILE SAVING WHATS LEFT OF MY PAINT JOB. IWOULD RECOMMEND THIS PRODUCT TO ANYONE.
by: Christian M.09/30/2014
The installation intructions provided were printed in low resolution so they were somewhat difficult to follow. Good thing for smart phones and pulling up the instructions from the interwebs! I haven't had the chance to test out the rack too much it feels solid. 4+ Stars
by: Michael05/24/2020
Put roof racks on today- a perfect fit! Best to use parts while ready directions to fully understand where they go before permanent installation.
by: Bryan L04/10/2019
After owning for a year this product works like its brand new. I haven’t had one issue with it. Extremely sturdy and definitely well built. If your in the market for a rack, I wouldn’t go with anything else. Yes, it’s a little pricey but it’s 100% worth every penny.
by: Erik11/29/2017
Made installation easy
Erik
12/2/2018
My rack works great! Use it for my 12 fishing kayak. Installing it was easy and looks great! Would definitely recommend!
by: Paul09/19/2015
Easy installation, specially when you read through the instructions first before starting. Only concern I have is that I may not have gotten a couple of the mounting legs tight enough, but I will just have to get a torque wrench (not something I have in my home tool inventory) and recheck all the mounting hardware. Love the look and noise is minimal. Great product, reasonable and fast 2nd day shipping. I strongly recommend to anyone needing extra space for trips.
25
2712
Show More Reviews
See what our Experts say about this Rhino Rack Roof Rack
- Will Rhino Rack Ladder Mounting Kit Fit 2013 Mazda 3 SedanIf your 2013 Mazda 3 Sedan has a Rhino Rack aero bar roof rack installed on it currently like with the part numbers # RRVA118B-2, # RRRLKVA, and # DK289 the Ladder Mounting Kit # SEGLK2B that you referenced would fit and work great. This only fits the Rhino Rack aero bar profile so it would not work on a different rack.
view full answer... - Need a Roof Rack System that will fit a 2012 Chevrolet Traverse and 2007 Mazda CX-7I spoke to my contact at Rhino Rack and our best recommendation for a roof rack would be the 2500 Series Roof Rack System. By using this system, two of the three components would work on both the 2012 Chevrolet Traverse and the 2007 Mazda CX-7. The 2012 Traverse will use Custom Clamps and Pads, # DK297, along with the Rhino Rack 54 Inch Long Crossbars, # RRVA137B-2 and Leg Kit, # RRRLKVA. The 2007 CX-7 will use Custom Clamps and Pads, # DK289, which attach to factory mounting points...
view full answer... - Will Thule Stacker Kayak Carrier Fit Rhino-Rack Euro Style Square Crossbars on a 2011 Mazda 3The Thule Stacker kayak carrier, # TH830, will fit the aero bars included with Rhino-Rack roof rack using the following parts: Vortex Crossbars, # RRVA118B-2 Feet # RRRLKVA Fit Kit # DK289 The bar spread required by the carrier is a minimum of 24 inches and the Rhino-Rack roof rack should be right at or a little above that 24 inches. I have included a link to a video showing a similar roof rack with the same foot pack being installed on a 2010 Mazda 3 for you. The Stacker should have...
view full answer... - Will the 65" Rhino-Rack HD Crossbars # RB1650 Fit on My 2010 Mazda 3 Hatchback?I have an answer for you. Unfortunately, the 65 inch Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1650 are too long for your 2010 Mazda 3 Hatchback with fixed mounting points. With that being said, you can still have shorter Rhino-Rack Heavy-Duty crossbars on your vehicle. Our installation team here at etrailer has tested these shorter bars with your vehicle so that they will fall within the required dimensions of local traffic laws. For this system, you will need the following parts:...
view full answer... - What Bike Racks Are Compatible With The Rhino-Rack 2500 Roof Rack Square CrossbarsAll three of those bike racks are compatible. The Rhino-Rack 2500 Roof Rack - Square Crossbars - Naked Roofs or Fixed Mounting Points - 46" Long, part # DS118B, is a roof rack with square crossbars. Nothing is ever absolute, but almost all of our roof bike racks will be compatible with this rack. Finding the one that is the best fit will depend on the features that are most important to you. All of the bike racks in your question are wheel mounted bike racks. For me, the most important...
view full answer... - Rhino Rack Recommendation for a 2015 Mazda CX-5Honestly the SportRack Semi-Custom fit roof racks don't always fit great since they aren't full custom fits. For some vehicles they fit decently and for others it's not the best. For a 2015 Mazda CX-5 the Rhino Racks are the best overall buy. They aren't crazy expensive like some of the other racks yet they still fit great. You would want the part # RRVA118B-2, # RRRLKVA, and # DK289.
view full answer... - Roof Rack Recommendation for a 2016 Hyundai ElantraIf you have a GT model 2016 Hyundai Elantra you would want the part numbers # DS118B and # DK289 to complete the rack. Or if you have a 4 door you would want the part numbers # RRVA126B-2, # RRRLKVA and # DK301.
view full answer... - Availability of Roof Rack Using Fixed Mounting Points on Roof of 2014 Mazda CX-5Rhino Rack offers a solution that would utilize the fixed mounting points in your roof. A rack can be assembled using the following parts: Vortex Aero crossbars, available in black as part # RRVA118B-2 or silver as part # RRVA118S-2 Roof rack feet, part # RRRLKVA Vehicle specific hardware kit to attach to roof mounting points, part # DK289
view full answer... - Roof Rack To fit 2016 Hyundai Accent Hatchback for Installing Roof Cargo BasketIf you are wanting to install a roof cargo basket like the Yakima LoadWarrior part # Y07070 on a 2016 Hyundai Accent you will need to have a roof rack installed that has crossbars that run from left to right. The most popular option for a roof rack that fits the hatchback model of a 2016 Accent is the Rhino Rack part # RRVA118B-2, # RRRLKVA, and # DK289. With this installed the Yakima basket would fit and work well.
view full answer... - Parts Needed to Carry 2 Kayaks on Roof of 2016 Mazda CX-5The Rola 59767 Sport Series roof rack you'd looked at would make a fine choice, if the combined weight of your kayaks is 100 lbs or less. If both kayaks combined weigh more than 100 lbs, you'd need to go a different rout as far as a roof rack goes. I'd recommend a Rhino Rack roof rack consisting of the following parts: -54 inch Vortex Aero crossbars, part # RRVA118B-2 -Roof Rack Legs, part # RRRLKVA -Vehicle Specific Clamp Kit, part # DK289 For a Kayak Carrier, I'd recommend the etrailer...
view full answer... - How to Attach Rhino Rack 2010 Mazda 3 Sedan Roof Rack for Fixed Mounting PointsThe RhinoRack roof rack system for your 2010 Mazda 3 4-door sedan, consisting of parts # RRVA118B-2, # RRRLKVA and # DK289, uses clamp assemblies (part # RRRLKVA) that do grab onto the door jambs on the vehicle. This component also includes locks to secure the rack to your roof. Optional locking end caps are offered for the Vortex Aero crossbars, part # RRVA-LEC4, to secure cargo carriers and other accessories to your crossbars. Before loading anything on your roof rack it is suggested...
view full answer... - Recommended Roof Cargo Box for 42 Inch Crossbar Spread on 2010 Mazda CX-9Based on my research, it does look like you are correct that the minimum crossbar spread on your 2010 Mazda CX-9 using the fixed mounting points will be around 42 inches. We only have a few cargo boxes available that are compatible with this large of a spread. The most economical box we have that will work with up to a 42 inch crossbar spread is the Yakima SkyBox 12 # Y07334. This cargo box provides 12 cubic feet of space and a dual-side-opening lid that allows you to load/unload cargo...
view full answer... - Roof Rack for 2016 Mazda CX-5 with Naked RoofThule recently redesigned their complete roof rack lineup so the older parts you mentioned right now will not be able to be used on your 2016 Mazda CX-5 but we do have great options that would work great like the Rhino Rack Vortex roof rack part numbers # RRVA118B-2, # RRRLKVA, and # DK289 which gives you the higher quality like Thule but at a better price. For a kayak carrier the # TH849000 would be a great choice as well as it's padded and can fold down when not in use.
view full answer... - Roof Rack Recommendation for 2013 Mazda CX-5Rhino Rack does offer an option specifically designed for your vehicle, a middle of the road price wise but great quality rack that would be assembled using the following parts: Vortex Aero Crossbars in black, # RRVA118B-2, also available in silver as # RRVA118S-2 Roof Rack Legs # RRRLKVA Vehicle Specific Fit Kit # DK289 to connect to the fixed mount points on vehicle roof The Rhino Rack is a higher quality product with a more secure mounting system that would be more durable in the long...
view full answer... - What Size Screw is Required for 2012 Mazda CX-9 Roof Rack?If you are looking for the screw size for the factory mount locations, you will use M6 screws that are 35 mm long which come in the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK289. For a roof rack, I recommend this fit kit along with the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and the 2500 Series Legs # RRRLKVA. Since you asked from a Yakima bar, the Yakima fit kit uses M6x28mm, M6x33mm and M6x40mm hardware as well as M8x35mm. These...
view full answer... - Recommended Rhino Rack Saddle Kayak Carrier for Use with 2500 Series Roof RackYour 2014 Hyundai Elantra's Rhino-Rack 2500 Series roof rack made of parts # RRVA118B-2, # RRRLKVA, and # DK289 uses aero crossbars that provide excellent compatibility with a range of kayak carriers that can be seen on the link provided. For a Rhino-Rack brand saddle style carrier you can use their Nautic # RR571 that allows loading from the rear of the vehicle. If you prefer a side-loading saddle carrier you can instead use # RR570. Pricing can be seen by clicking on the links.
view full answer... - Recommended Roof Racks for Mitsubishi RVR 2018We have roof racks that are a confirmed fit for your 2018 Mitsubishi RVR. If you have a naked roof you'd want the Rhino Rack kit part numbers # RRVA126B-2, # RRRLKVA and # DK289 which is a confirmed fit and would work well. If you have flush rails on your roof that you can't put your hand under you'd instead want the Rhino Rack roof rack part # RRVA126B-2 and # RRSX031. I also attached a link to a page that has all of the roof rack options we have for your vehicle as well.
view full answer... - How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer... - Roof Rack for 2008 Mazda 3Rola used to have roof rack kits for your 2008 Mazda 3 that would mount to those fixed points but those parts were phased out by Rola. If you want a roof rack, you will need the Rhino Rack system with parts # RRVA118B-2, # RRRLKVA, # DK289. This mounts to the fixed mounting points on your 2008 Mazda 3. Rhino-Rack makes great roof racks that are a bit more budget-friendly compared to Thule and Yakima. Their construction is also really solid and have a weight capacity of 165 lbs. I attached...
view full answer... - Will a SportRack Roof Rack Fit a 2010 Mazda 6Yes, the SportRack semi-custom roof rack, # SR1010, is listed as a fit for your 2010 Mazda 6 sedan. It does not fit a 5-door model. I have included a link to a video review of this series of roof racks for you. If you have a 5-door model then there is one roof rack option from Rhino-Rack using the following parts: Euro Square Crossbars # RRVA126B-2 Feet # RRRLKVA Custom DK Pads # DK289
view full answer...
- Should The Ditch Molding Get Reinstalled After Putting A Fixed Point Rack On A 2015 Mazda CX-5I don't think I have actually seen anyone put the molding back on after removing it. The fixed mounting points were specifically designed to have a roof rack added on, so they are sealed and will not leak or anything. You technically could alter them to get them reinstalled, but it really isn't necessary to do so and will probably be more trouble than it's worth.
view full answer... - Best Roof Rack for a 2005 Mercedes-Benz C-Class and a 2012 Mazda 3We do have a great option from Rhino-Rack that uses most of the same parts, but since the 2005 Mercedes-Benz C-Class has no fixed points and the 2012 Mazda 3 has fixed points they will have different fit kits. I recommend going with the Vortex Aero roof rack which consists of Vortex Crossbars, part # RRVA118B-2 for Black or part # RRVA118S-2 for Silver, and the 2500 Series Legs # RRRLKVA. For your 2005 C-Class you will need the Fit Kit part # DK102, while the 2012 Mazda 3 will use the...
view full answer... - Will Rhino-Rack Roof Rack Fit 2012 Mazda 3 With Fixed Mounting Point On RoofThe Rhino-Rack 2500 Series Roof Rack with Vortex Aero Crossbars is a great fit for your Mazda 3. This will attach to the fixed mounting points on the roof of your car and also provide you with added security with the included Locks in the leg covers. For this roof rack you need parts # RRVA118B-2, # RRRLKVA, and # DK289. This roof rack does have a weight capacity of 165-lbs but you will want to check your owner's manual or with your dealership to make sure you do not exceed the roof weight...
view full answer...
- Recommended Roof Rack And SUP/Surfboard Carrier For 2014 Mazda CX-5 W/ Bare RoofFor your 2014 Mazda CX-5 with a bare roof I recommend the Rhino Rack Roof Rack which uses 46"Rhino-Rack Vortex Aero Crossbars # RRVA118B-2, Legs # RRRLKVA, and Fit Kit # DK289. This option will give you 46" of useable crossbar space, a 165lb weight capacity, and can be secured to the roof of your CX-5 with the included locks installed on the legs. To carry your Surfboard, longboard, and SUP I recommend the Inno Locker Watersport Carrier - Locking - Channel Mount # INXA445 which will fit...
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Test Fit:
Zack K
Video by:
Andrew K
Video by:
Zach D
Video by:
Schuyler H
Written by:
Tyler C
Updated by:
DeAnne T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Daron K
Updated by:
Alex H
Video Edited:
Jacob T
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
10/14/2022
Fantastic! Very little noise on highway and sturdy.