T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(184 reviews)
Price: $82.89
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118515
Retail:$112.03
Our Price: $82.89
You Save: 26%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (184)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118515
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk or rear cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118515 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118515
Average Customer Rating: 4.8 out of 5 stars (184 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: William 02/06/2024
2013 Ford Edge
Excellent product and installation inst ructions
by: Erik B07/23/2014
2013 Ford Edge
Wiring was straightforward, exactly as in video and quite easy. It was not hard at all to modify install and run the wires on the interior inside the door sills instead of zip tied underneath the vehicle. Also easily added the wiring adapter to the hitch for a clean look. I wouldn't hang the wires, pinched under the back door, not when it was this easy to add the mount and adapter. Either get the flat mounting bracket or upgrade to the dual as I did.
by: Matt04/27/2022
Installation of this wiring harness on my 2013 Ford Edge was fairly easy, the install video provided by etrailer.com was easy to follow and gives a step by step process. Instead of running the main power wire under the vehicle I chose to run it inside. The wire tucked nicely under the panels along the driver side, there’s a grommet that goes right into the engine bay above the pedals under the driver side fire wall. Also opted for the adapter #37175 to avoid running the 4 pole flat wire under the tailgate. The install for the wiring harness took approximately an hour
by: Ken09/06/2023
Was pretty easy to install with help of the online videos. Did have to make a slight alteration as I could not get the plug thru the passenger side opening on my particular model.
by: Kent 04/13/2024
Superb customer service! Never seen be tter!
by: George12/08/2019
I actually haven't installed the wiring yet. Hitch is solid tho
by: Honest TJ01/19/2023
T-One wiring harness was the best purchase I could invest for my vehicle. etrailer has great prices and was pleased their website listed qualify wiring installation companies. etrailer will continue to be my go to for anything relating to vehicle wiring or lighting.
by: David01/25/2023
2014 Ford Edge
Bought my 2014 Edge new with a hitch but no wiring harness (bike rack only). Over time came to realize I could really use the wiring harness. Did an Internet search, etrailer came up, found the harness I wanted, the video was the clincher for me. I'm a DIY'er but not so much on cars. Followed the video instructions, even bought the silicon sealer and tester. I ran the battery wire under the car and this was the only challenge for me as I do not have a lift, so laying on my back on a cold winter day took a bit longer than expected. Product delivery was prompt, fair price, very happy with this purchase.
by: Kenneth 07/22/2021
Although I have not installed this yet, I will rate excellent based on prior experience. This is the 4th hitch & wiring from Etrailer in the past 8 years that I have purchased and installed. 2 for my cars, one for a relative and one for my fiancee. All have been easy to install, excellent quality, with superior support and service.
by: Rod05/20/2021
I bought my "made to fit" hitch and wiring from you a year ago. It was the second time I bought a hitch and wiring from you (I traded that vehicle for this one). I both cases the hitch and wiring fit right, worked right and were easy to install using your video tutorials. You all do a great job over there. Keep up the good work. Ok...one suggestion only: the hitch for my old Saturn Vue came with a rubber cover for the receiver but the one for my Ford Edge didn't so I bought one at [outdoor and homegoods store]. I suggest always including one with a hitch. Thanks again for being a solid, reliable company with good products that work as advertised.
Rod
5/21/2022
Isn't working. I believe it is wired correctly but not getting the functions to work at the 7 blade except one that lights the tester up and stays on. Have not tried to diagnose yet.
Katrina B.
5/26/2022
Have you had a chance to test/diagnose the wiring? We would need to know the results of this testing in order to better assist you.
by: Mike N.06/29/2013
My order arrived quickly, (3 days) was correct and installed exactly as in the video! I did choose to route the power wire internally and slipped it through the firewall alongside the factory wiring harness. Start to finish took about two and a half hours for the hitch and wiring. Excellent service, quality and instructions! I would definitely recommend etrailer, and will use them again for my next hitch.
Mike N.
12/28/2014
One year later everything still works perfectly. Ive towed half a dozen different trailers with no issues.
by: Harry06/29/2014
Wiring harness has been installed and tested with the trailer. No problems with either. I am disappointed that the instructions say to run the trailer end of the wiring out of the vehicle through the tailgate gasket when there is a more professional way to easily get the flat connector outside with no worry about pinching the wiring in the tail gate opening.
Harry
6/29/2015
JU=ust fine, no problems with several uses for over a year
by: Robert L.01/20/2014
2013 Ford Edge
This is the second time I've used etrailer.com, and frankly, I'm blown away at how great this place has been in 1) having what I need and 2) delivering it more quickly than they promise. etrailer is neck and neck with Amazon in ease of use and delivery (in my opinion), and that's really saying something.
As for this particular product, I'm very pleased. It was delivered as seen in the pic and was relatively simple to install. The only downside was that the screw used to afix the ground wire was missing from the package, and the instructions were lacking -- in fact, they miss the final step of the installation.
Again, I'm very happy with my experience and will use etrailer.com for any and all of my future needs.
Robert L.
1/20/2015
Everything is still great, Patrick. Thanks for checking in.
by: Nathan 05/23/2023
Ford Edge
This harness fit my Edge like a charm.
by: Michael J.S.05/09/2013
This wiring harness was so easy to put in. I don't do wiring. I get others to do it for me. But there was no one around to do it . It took me about 45 min it was plug and play I only wish all my jobs where that easy Thank you
Michael J.
5/9/2014
It is great it was easy to put in and worked great since Ive had it
by: Joseph 07/12/2023
Perfect fit. Easy install. Looks and fits great.
by: Lew04/01/2022
Follow directions. It is an easy install. Just takes time.
Lew
4/2/2023
Works great every time I hook my trailer wiring. No issues, just works
by: Chuck 07/09/2023
Great products, and quick shipping. Always available if you have any questions.
by: Tom 09/10/2022
This wiring harness made the install a one man job. Very easy to do and made the wiring super simple. Worked right the very first time. Instructions were very concise and easy to follow. I put this on a 2014 Ford Edge Sport.
by: Matt G04/09/2017
Ford Edge
Super fast shipping and very easy install on my Ford Edge. Watched the video on their website and that gave me confidence to do it myself. Definitely do business with etrailer.com again!
Matt G.
4/9/2018
Still Working Great!
by: Steve01/08/2012
2012 Ford Edge
I Limited version of the 2012 Edge and while the left-side installation was easy, the right-side would not snake throgh the sidewall between the chasis and the interior side panels due to the sub-woofers use of the same space. I ended up cutting the red and green wires about 4ft from the T-connector and using butt-terminals and shrink wrap. I took the opportunity to add a protective sheath over the wire all the way back to the light assembly. Also, the instructions don't tell you that the two plastic trays in the cargo area are easily lifted out. They are kept in place by a few guide pins. The hardest part is running the wire from the battery back to the control module. The instructions want you run the wire through the interior of the car, but I added about 16ft. of protective sheath and ran the wire behind the battery, down the fire wall and along underside of the chasis. There is a plastic rock guard that runs down the drivers side and I tie-wrapped the wire above that. From the underside of the car, you can't see the rubber gromet that is above the left-rear heat shield. Just send a fish down from the cargo bay and pull the wire through. Works great and I'm glad to know that the car's electronics are separated from the trailer wiring.
by: Marshall10/19/2016
2013 Ford Edge
Folks, I received my hitch (Draw-Tite 75992) and my wiring harness (118515) the other day, the box wasn't in the best of shape however, the contents were in good shape. I utilized the matched video to install both hitch and harness with ease. It took me about 2 hours and 15 minutes for both and really enjoyed the installation. The bolt guides designed to thread the hardware through the frame were geniuos and made the process easier. This hitch assembly works great with my tent trailer and utility trailer. I give these products a five star rating and would recommend to everyone. Thank you, Marshall
by: Tom M.08/08/2014
2012 Ford Edge
Before ordering, I read the other reviews and people were all very impressed with this wiring kit. I must say that I agree, the fit, cable lengths, and quality of the harness is excellent. I also appreciated the video on this website that showed the installation process in a vehicle like mine. Very nice that it fits into the manufacturer's wiring by just plugging in and not having to splice wires, so there was little chance of connecting the wrong wires or of them not being a solid connection. Wiring the power line to the battery was the hardest part, but not too bad. I ran the line through the passenger compartment under the rocker panel trim and then fished it into the engine compartment even though the directions said to route it underneath the vehicle. I also routed the 4 pin trailer connector down under the car by the trailer hitch where the instructions said leave it inside and let it dangle out the hatch when in use. These were a couple of things that made my installation a little neater and cleaner. I wouldn't hesitate to order one of these again!
by: Dave D.09/30/2013
2013 Ford Edge
The product is good. Installation is a bit of pain. 4 Stars because my kit was missing the sheet metal screw as well. Really not a big deal, especialy since I had a bunch laying around.
I found installing the hitch iteself, without a lift or ramps, easy. I found having to try and snake the power cable from the battery to back of the truck, without a lift or ramps, a pain. That is not really a fault of the product, and I guess if I wanted to I could have pulled trim and run it inside the truck. Other than that, easy install.
by: Leonard 07/23/2023
Just got my order, thanks
25
184
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Does Power Wire for Trailer Wiring Harness have to Go to Battery on a 2013 Ford Edge SEThere are several reasons why you are not supposed to use any other power source to install a powered trailer wiring harness such as # 118515. First, attaching the wire to the vehicle battery is part of what gives the circuit protection between the vehicle and trailer wiring. If that wire is installed anywhere else you will lose that protection. Second the converters are not tested with or rated for a connection to any other power source. Installing it in a manner different from the instructions...
view full answer... - Do All Trailer Hitches For 2014 Ford Edge SEL Require DrillingI can understand not wanting to drill holes to mount a hitch, though the Draw-Tite # 75728 is only a fit the Sport model and will be unable to fit your 2014 Ford Edge SEL. I did double check with the manufacturer for you just to be certain. So to add a hitch to your '14 Edge SEL you will need to drill 17/32" holes in your frame rails for installation. Drilling to install a hitch is something that is pretty frequent and a lot of people do, even in areas there is bad weather, and you can...
view full answer... - Is Hitch Height On Curt Class III 2 Inch Hitch # C13067 Same As Factory Hitch On 2011 Ford Edge SELWhen the Curt Class III 2 Inch Hitch, part # C13067, is installed on a 2011 Ford Edge SEL the hitch receiver opening is located right under the rear fascia. If your vehicle has the factory 1-1/4 inch hitch on it the Curt hitch will fit right beneath the factory hitch. The recommended Curt Ball Mount, part # C45010, has a 3/4 inch rise or a 2 inch drop. If you use the ball mount with the 3/4 inch rise it will put you close to the factory hitch height. You will want to measure the difference...
view full answer... - Will Only the Receiver be Showing on Draw-Tite Trailer Hitch for a 2013 Ford EdgeYes, only the receiver on Draw-Tite trailer hitch # 75992 will be visible after installation on your 2013 Ford Edge. Take a look at the picture I have included that shows the hitch installed. I have also linked the instructions for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch...
view full answer...
- Differences Between Hidden Hitch 87617 and Draw-Tite 75728 Trailer Hitches for 2014 Ford Edge SportThere sure is a difference! One has a Hidden Hitch sticker, the other has a Draw-Tite sticker. Other than that, both hitches are absolutely identical in appearance, have the same weight rating, would install in the same manner and share the same installation instructions. The Hidden Hitch has been discontinued by the manufacturer, so the part number actually redirects you to the Draw-Tite Hitch now. If you'll be using the hitch for towing, you might be interested in the following items...
view full answer... - Which Trailer Hitch Will Fit a 2012 Ford Edge SportI spoke with my contact at Draw-Tite and he said that the ground effects/rear fascia on a 2012 Ford Edge Sport prevent hitch # 75992 from fitting properly. I do have a trailer hitch that fits the sport model. It does require some trimming but not any extra trimming other than what is specified in the instructions. Take a look at the CURT Trailer Hitch # C13067. I confirmed with CURT that it will fit the 2012 sport model. I have included a link to the installation instructions for you...
view full answer... - Install Tip for Getting Connectors of Trailer Wiring for 2012 Ford Edge Out to Light AssembliesIf you check out the install video I attached (at the 1:00 mark), you can see our installer using a length of air tube fed down to the interior of a 2012 Ford Edge like yours so that he could then attach the wire connectors of the # 118515 to it and then pull it back up. Using this method will make installing the harness possible on your vehicle.
view full answer... - How to Add 5-Way Wiring Harness to a 2012 Ford EdgeWe do have some options for you to add a 5-Way wiring connector on your 2012 Ford Edge, but the available wiring kits that tee in behind the tail lights don't come with 5-Way connectors. Your options to adding a 5-Way include using a wiring kit like the T-One # 118515 and then cutting off the 4-Way and splicing in a 5-Way like the Hopkins # HM37908, OR you can just install a 5-Way harness that splices in completely like the Tekonsha # 119177KIT. Attached are some videos you can check...
view full answer...
- Will the Ground Clearance of the Draw-Tite # 75992 on a 2011 Ford Edge be an Issue When TowingYou should have no issues being able to tow a trailer behind your 2011 Ford Edge Limited after installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75992. You will simply need to find a ball mount that has the correct rise or drop to ensure that it is level. When we installed this trailer hitch on a similar 2011 Edge (see attached video) we found from the ground to the top of the inside of the hitch receiver was about 13-1/2 inches. You can use this measurement and the attached ball...
view full answer... - Trailer Wiring Harness Recommendations for 2013 Ford EdgeTo install a 4-pole trailer connector on your 2013 Ford Edge, I'd recommend the Tow Ready # 118515. This wiring harness does have a direct connection to the battery, this is done for a good reason. Years ago, you could tap into the taillight circuits to power your trailer taillights. The wires were of sufficient gauge so that plenty of power for both the vehicle and the trailer taillights could be drawn through the vehicle's taillight circuits. Now, due to cost restraints, the automobile...
view full answer... - Carrying 3 Kayaks on a 2013 Ford EdgeIn my research I found that the load-carrying capacity of the roof on your 2013 Edge is 100 lbs. A roof rack that clips to the door frame would have a limited weight capacity and would not clear the side rails on your Edge. I am afraid 3 kayaks would weigh much more than the roof weight capacity of your roof but I do have a recommendation. I recommend installing a hitch and using a small trailer like the Yakima Rack and Roll Trailer, part # Y08106. This trailer has two 66 inch round crossbars...
view full answer... - Replacement Trailer Wiring Harness for 2013 Ford EdgeEither the converter box is bad or the wiring just isn't making a solid connection. Easy way to test this is to test for voltage on the input side of the box with a circuit tester like part # PTW2993 when applying the right turn signal. If there is voltage there but not on other side of the box then the issue is the box. If not then the connectors just aren't making a solid connection. We have the best luck with the Tekonsha harnesses so if you need a replacement the part # 118515 would...
view full answer... - Adding a Trailer Wiring Harness to a 2013 Ford Edge that Already has a Tow Bar Wiring HarnessWhat you can do is install Tow Ready trailer wiring harness # 118515 on your 2013 Ford Edge. You will basically be daisy chaining its connectors in line with the # HM56001 and vehicle wiring connectors. I spoke with our shop manager to verify that this will work and he said that it would! Installation of the trailer wiring harness does require a direct connection to the vehicle battery (to power the trailer lights). I have included a link to a help article with tips on routing the power wire.
view full answer... - Availability of a 4-Pole Trailer Wiring Harness for 2011 Ford Edge SEL AWDFor your 2011 Edge, I'd recommend the Tow Ready vehicle wiring harness, part # 118515. The wiring harness plugs inline with the connection between the factory wiring harness and the vehicle taillight assemblies. You'll need to run one wire under the vehicle up to the positive battery terminal. I'll link you an FAQ article and an install video that you might find helpful.
view full answer... - Will Tow Ready T-One Trailer Connector and Circuit Protected ModuLite # 118515 Fit a 2011 Ford EdgeI checked the Tow Ready website and called and spoke to my contact to verify and both indicated that the T-One Connector w/Upgraded Circuit Protected ModuLite, # 118515, will fit the 2011 Ford Edge. It was specifically designed for and tested on 2011 models. I have included a link to the installation details for reference.
view full answer... - Towing Capacity of 2013 Ford Edge 3.5L AWD Without Tow PackageAccording to page 249 of the owner's manual for your 2013 Ford Edge, the 3.5L V6 has a max towing capacity of 2,000 lbs without the tow package but 3,500 lbs with the tow package. I'm not sure what all comes with the Class II Trailer Tow Package so you will need to confirm that it is safe for you to tow up to 3,500 lbs with your local Ford dealer. Since this is the case this means that even if your trailer hitch has a 4,000 lb towing capacity, like the etrailer.com # e98870, you are limited...
view full answer... - Recommended Trailer Wiring, Brake Controller, and Battery Charger for 2011 Ford EdgeFor your 2011 Ford Edge, if you don't already have a trailer hitch receiver I recommend starting with the # e98870. Then for your wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118515 and then using the # ETBC7 wiring kit to get your 7-way. Then use the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 for the trailer brakes. For the power to charge your battery and power the small refrigerators, you will want to use the Redarc In-Vehicle...
view full answer... - Parts Needed to Install a Brake Controller in a 2013 Ford EdgeYou will need to hardwire in a brake controller on your 2013 Ford Edge. First you will need to convert the 4-way to a 7-way. For that you will need an Brake Controller Installation Kit # ETBC7. This comes with everything you will need to install a fully functional 7-way and brake controller in your vehicle. I attached installation instructions and an install video for this product for you to check out. If you do not have a brake controller picked out yet check out the Prodigy P2 Brake...
view full answer... - Is Any Fascia or Bumper Trimming Required to Install a Trailer Hitch on a 2011 Ford Edge SportWhen installing Draw-Tite trailer hitch # 75728 on a 2011 Ford Edge, there is no trimming of the rear fascia, bumper, or diffuser. You will only need to trim some heat shields under the vehicle in order for the hitch to fit properly. I have included a link to the installation instructions for you to view. If you plan on doing some towing I recommend the etrailer ball mount kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. For trailer wiring,...
view full answer... - Trailer Hitch Recommendation for a 2011 Ford EdgeThe Hidden Hitch part number 87604 that you referenced has been replaced by the Draw-Tite part # 75992 so that would be the hitch you would want. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a...
view full answer... - Can 12V Outlet in Rear Of 2014 Ford Edge be Used For Trailer Wiring Harness PowerThe problem with using the 12V outlet at the back of your 2014 Edge is that the outlet is on a fused circuit. If the fuse would blow you would not have trailer lights and you would not know it. It can be a bit tough to run the power lead wire to the positive battery post but it really is the only way to be sure you have power to your trailer connector. The trailer wiring harness I recommend is part # 118515. I have attached a link to an installation video for this harness on a 2014 Edge...
view full answer... - Non-Intermittent Power On Trailer Turn Signal Circuit for 2013 Ford Edge with Curt Wiring Harness If you have a constant signal when testing the right hand stop/turn pin on the trailer side trailer connector then we know there is an issue with the vehicle or wiring harness. The next step I recommend you take is test the right hand turn signal wire that leads into the converter box. If all is normal here then we know the wiring harness is bad and will need to be replaced for which I recommend the T-One Vehicle Wiring Harness part # 118515 as it is a more reliable option than the Curt...
view full answer... - Trailer Hitch and Wiring Harness for 2011 Ford EdgeThe Draw-Tite Trailer Hitch # 75992 is a great option for your 2011 Ford Edge though in terms of a wiring harness, there isn't a harness that is an external plug-in or that can be mounted externally unless you do your own modification and find a way to route the harness underneath your Edge. As you can see by the accompanying cut out of the reviews I added we did have one customer run the 4-way through the grommet on the left side of the spare tire in a '11 Edge. The most reliable wiring...
view full answer...
- Parts Needed to Convert a 4-way to a 5-way on a 2011 Ford EdgeTo get a 5-way flat connector on your 2011 Ford Edge you are going to need to install the Tow Ready Custom Fit Vehicle Wiring # 118515 and then install a 4 Pole to 5 Pole Trailer Wiring Adapter # 20036. The # 20036 will plug into the 4-way of the # 118515 and then you will run the blue wire to the reverse light circuit of your vehicle and you will have a fully functional 5-way. You might need a circuit tester like our # 3808 to find the correct wire to tap into. Check out the installation...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Brent H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken
7/23/2022
Fantastic. Love it. This is the 4th I purchased and installed.