THIS ITEM IS NOT A FIT FOR
2022 Chevrolet Silverado 3500
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118410
Retail:$112.03
Our Price: $72.49
You Save: 35%
2022 Chevrolet Silverado 3500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (114)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118410
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- Powered Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points behind tail lights
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118410 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2008 Hyundai Entourage
- 2007 - 2008 Hyundai Entourage
- 2006 - 2014 Kia Sedona
- 2006 - 2014 Kia Sedona
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118410
Average Customer Rating: 4.8 out of 5 stars (114 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: James 11/09/2022
2011 Kia Sedona
Installed in 2011 Kia Sedona with reasonably ease and works great. If the control box could be a bit smaller/thinner that would be nice; it fit but with no space to spare.
by: Mike it was way too easy to put in took me 15 minu06/10/2024
It was way too easy
by: LaDonna07/20/2023
I really can not say as I was never able to use it. After installing it, the car was in an accident and all was surrendered as a total loss. I have since replaced the car but have not yet replaced the hitch. Having second thoughts.
by: Ray 12/01/2019
Just got the trailer wiring kit (Tekonsha - model # 118410) yesterday afternoon and installed in a few hours (by myself) today. I did use the car jack to help with the wiring, but otherwise it’s pretty straight forward. The installation video for this part that’s provided on the Etrailer website is very useful. Anyhow, this wiring kit works well. I’ll write a review if I have any issue in the future, but otherwise, it works great.
Thank you to Etrailer for the great customer service, good products and instructional videos.
Ray
12/2/2020
The product has been working well without any issues. I use my trailer regularly. I am very satisfied with this T-one product. I definitely recommend to others who are interested in getting this product.
by: Fred O05/26/2015
2011 Kia Sedona
The printed installation instructions were fine, although there are better ones on YouTube, including some vehicle-specific shortcuts.
This wiring harness is a replacement for the previous T-One harness, which had the controller die after only three years.
I see that there is a redesigned controller on this one. Hope it is more durable.
Elaine Z.
5/25/2016
Working as expected, and hope to get more than 3 years of use out of this one, as was the case with the first T-One harness.
by: Charles01/29/2019
2008 Kia Sedona
One positive, you did ship promptly. Every time I plug in the trailer the fuse to the interior lights blows, trailer lights are ok.
I paid Kia shop 100 $$ to tell me this. he tested all circuts and they were fine. I didn't have another $100 to take the trailer and try again.
This was the 3rd wiring product we ordered. the first was quickly burned out . so we bought a new trailer and tried your product, not happy. and you advertised it was exactly for this 08 Kia Sedona, custon fit you say. Any suggestions or improvements from your experts would be appreciated.
sorry no pictures.
Mike L.
1/29/2019
The harness you purchased is indeed compatible with a 2008 Kia Sedona. What youve describe indicates that theres a short somewhere in the trailer wiring. Youll need to begin at the trailer connector, and trace each circuit until it terminates at its lamp. Look carefully for pinched wires and loose connections. Look for nicks, cracks and worn spots in the wire insulation. If the copper conductor grounds out to the trailer frame, youll keep cooking taillight converters or blowing fuses forever until the problem is located and repaired. Check the bulb sockets in each lamp as well. A corroded bulb socket could also cause the problem you mentioned. Ill also link you to some troubleshooting articles that you might find helpful.
by: John Q.06/03/2016
2011 Kia Sedona
The tow kit the dealer installed in my 2011 Kia Sedona when it was new went sour after four years, so I bought the etrailer kit to replace it, figuring that the dealer would soak me hundreds of dollars to do the job and just put in another problem kit (I discovered that the kit they put in the new car had even been tampered with). The etrailer kit was reasonably priced, came with all the documentation and parts I needed and then some, is perfectly compatible with my vehicle, and works fine.
John Q.
6/3/2017
One year later, the kit still works fine.
by: Bob C08/02/2017
2016 Kia Sedona
Everything about my eTrailer experience has been absolutely first class, including the follow up emails, 2 of them. Due to a medical problem it's taken me over a year to complete the installation but that's on my end. I installed the hitch and wiring harness in May of 2016. I just now got to running the power wire up to the battery and finishing the job today, 8/2/17. Again, all due to issues on my end. The product, the personal assistance, and the videos made this job as easy as it could be for this 68 year old putting a hitch on a 2012 KIA Sedona by himself. Thanks to eTrailer for running a most excellent company in every regard.
by: Bob05/23/2018
2008 Kia Sedona
Easiest job I’ve ever done with a wiring harness, and I didn’t have access to a lift. I just hope I did it right going by the suspension. The online video didn’t show that very well.
Bob
5/23/2019
Still going strong. It may outlast my old van.
by: Brian02/04/2016
2008 Kia Sedona
I purchased a trailer hitch, wiring harness, brake controller and all the additional necessary wiring for my 2008 Kia Sedona. Other than issues I encountered unrelated to the items I purchased, everything installed smoothly and continues to operate as expected after 6 months. I would definitely recommend this site to anyone. In addition, their on point instructional videos made things even easier than I could have hoped.
by: Casey R.02/02/2014
2012 Kia Sedona
Made the wiring so much easier, the kit was very complete. I did use several additional zip ties for the battery wire as I secured it in a lot of places along the under side of the Kia van.
Casey R.
3/3/2015
Thanks, Patrick every thing was great and working fine. Charles
by: Gary 07/05/2023
One year follow-up. This worked really well and has been great. No problems at all.
by: Logan 11/04/2022
2007 Hyundai Entourage
This harness is well designed, comes with just enough wire to go where it need to go, and works perfectly! The instructions weren't very helpful, but a video on the etrailer.com website took me through it step by step. Overall very happy with the product!
by: Kenneth 02/27/2021
It does exactly as it’s suppose to do. I’ve recently added a 7-way adapter and brake controller item # 39523 and added it to this product and works outstanding. All of which came from etrailer.com as does all my hitches and wiring needs.
by: Eugene04/24/2013
2011 Kia Sedona
The installation of this harness is easy and straight forward and took about 45 minutes to install. I would suggest watching the video about this installation.
Gene
4/24/2014
All is working fine. The first one I bought only work for 14 months then failed. So far this one is still working.gene
by: Glenn Johnson10/12/2012
2007 Hyundai Entourage
The product arrived quickly and well packaged. The directions are clear and easy to follow. I have not needed customer support.
One area could use improvement. The directions give precise directions on how to route the cable across the back of the van under the bumper skirt. The much longer run, the power line from the back of the van to the battery under the hood, simply says to route the line avoiding hot, sharp or moving parts. Suggestions for doing this would have been appreciated.
The directions also indicate that the control box, which is about the size of a playing card and the thickness of an Iphone, gets mounted below the left tail light -- it will actually fit into an existing recess in the tail light enclosure. This is a better placement because it is totally out of the weather and there is no possibility that the double sticky tape will give way and allow the control unit to drop toward the road.
In conclusion, it seems to be a well made and packaged unit which was reasonable to install (time about 90 minutes) and performs as advertised. I would recommend it to a friend.
by: Bob M.07/27/2011
2008 Kia Sedona
Very good product, shipping with tracking, etc. For me, the video clip was more helpful than the written instructions for my specific vehicle.
A word to the wise for 2008 Kia Sedona owners: if you're also going to install a Hidden Hitch (70761) at the same time, be sure to watch the video for both installations first. About halfway through the wire harness install, you need to remove four plastic screws from the bumper flange. It would be a lot easier to do that before you install the hitch, as the hitch blocks the two center screws.
by: Bill In Snowfalke08/30/2013
2010 Kia Sedona
Works well, and the video helped with the installation. Be aware that removing the taillights is not as easy as it appears in the video. You have to yank and pull and pry around to get the pins on the lights that go into grommets in the body to let go. I thought I was going to break those plastic pins until I saw that they went into the grommets on an angle. Be careful and it will be okay.
by: Gregory04/08/2018
2008 Hyundai Entourage
I got the wiring kit for a 2008 Hyundai Entourage van. It took at least 2 hours to install. Running the power wire from the battery to the left rear light was the hardest and dirtiest part. I cleaned off the under coating and hot glued the wire to the undercarriage and then put silicone over that. I didn't like the idea of the wire running near the fuel tank. Worked for me. You have to fish the wires through the bumper / body to get to the lights. It wasn't that easy to do. Also that bumper facia part is hard to get off being like jammed up under the van. Oh, I also soldered the wires, I've had problems in the past with corrosion with the crimp on connectors. Whatever, it got done and works. Sorry, no pictures, can't bring myself to crawl under there again today.
by: Mike S.11/08/2012
Because wiring a vehicle for trailer lights was an entirely new task for me, I had some doubts it would turn out well. The instructions were very helpful and the job was successfully completed in a few hours. Working without a lift and working while lying on the floor under the van made things more difficult. I may have shorted out the battery. Be sure to disconnect the negative terminal before makeing any connections on the positive side. Bottom line is that etrailer is a good vendor to do business with.
by: JB04/15/2011
No problem with the product. Getting the tail lights off was a little trickier than what it shows on the video. I pulled the first one off at the wrong angle and put a small crack in it. When you pull it, pull it more perpendicular to the side of the car then parallel (straight to the rear).
A few more wire ties in the kit would be nice, but maybe I went overboard.
by: Jeremy09/04/2012
2009 Kia Sedona
Installed the wiring harness yesterday and had no issues with the harness itself. Have a 09 Kia Sedona and it was a pain to install the line to the battery and the line to the passenger side taillight. Getting the wire to the battery was a pain to get from the back bumper area past rear suspension. For the passenger side taillight, getting the wires up to the light was the hard part. There is a black plastic piece that goes on the underside of the bumper, took that off and it became much easier to get the wire up.
by: Corey C07/20/2020
Took me almost a year to get around to installing. I was nervous that I would run into something I couldn't figure out. The instructions provided with the product were very clear and the only challenge was around routing wires through the tail light area. Product works great. Definitely recommend!
by: Ronald12/14/2017
Item 118410--My son installed the wiring harness for the hitch we purchase from you last week. All needed parts were included and the instructions via internet were very helpful. I needed the hitch and wiring to tow my fishing boat--all is well, Thank you!
Ron Blough
by: Elissa10/20/2011
I actually reviewed the wiring harness with the Curt hitch but I will repeat myself and say that the youtube video provided by etrailer.com was very helpful in installing the wiring. Everything arrived in good time and it was an easy install (for my neighbor)
25
114
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Installing an Electric Trailer Brake Controller from Scratch on a 2009 Kia SedonaTo install the Tekonsha P-3 Trailer Brake Controller, # 90195, on your 2009 Kia Sedona, there are a couple of wiring harnesses you will need. First, if the vehicle does not already have a 4-Way flat trailer connector, you will need to install Tow Ready Custom Fit Vehicle Wiring, # 118410. I have included a link to the installation details and a video showing a typical installation for reference. With the 4-Way installed you would then need a 7 and 4 Way Installation Kit, # ETBC7. This...
view full answer... - Will the T-One Vehicle Wiring Harness Replace a Factory Wiring Harness on a 2007 Hyundai EntourageYes, the T-One Wiring Harness, # 118410, will work if the factory wiring harness on your vehicle does not work. You can remove the factory wiring harness or tie it off underneath the vehicle. The T-One wiring harness uses different connection points than the factory wiring harness. The T-One harness will plug into the tail light wires attached to the tail light assembly. I have included installation instructions and a demonstration video for you to check out. The vehicle in the video...
view full answer... - Easier to Install Trailer Wiring Recommendation for 2009 Kia SedonaWe have pretty easy to install trailer wiring kits that fit your 2009 Kia Sedona like the Tekonsha part # 118410 which does not require splicing into your vehicle wiring but we don't have a simple plug and play kit that would plug into a port at the rear of your vehicle. I attached an install video for this kit for you to check out as well.
view full answer... - Trailer Wiring Solution for a 1996 Forest River Pop Up with 6-Way SquareWe have a solution for you, but we do not carry the adapter you are looking for. A much easier solution would be to cut off the connector on your trailer and replace it with a 7-way like part # H20043 since that would make your trailer easier to connect to your vehicle and other vehicles. You would need to determine the functions of each of the wires on your trailer first. You can do this by running a jumper cable to each of the wires from a 12 volt battery. Once you do that you can then...
view full answer...
- Which Wiring Harness Is Recommended For My 2008 Kia SedonaI would recommend the T-One Vehicle Wiring Harness, item # 118410, which is rated for trailers with more than two taillights. This wiring harness is circuit protected and draws its power from the vehicle battery and protects the vehicles sensitive circuitry. I will provide you a link to the install instructions, as well as a link to our installation video.
view full answer... - Recommendations for Converting a Trailer with a 6-way Round to a 4-wayWhat I would do in your situation is cut off the square connector and install a 4-Pole Trailer End Connector # 18004 instead. This way the wiring harness # 118410 that you ordered will plug right in, and if you ever have to tow the trailer with a different vehicle it would work. You will need to wire the 4-way in by function to the 4 wires that got cut off. You can either use a power source to put voltage on the circuit so that you figure out what wire does what, or you can trace the wires...
view full answer...
- Problems with Trailer Wiring Working Intermittently on a 2012 Kia SadonaIf the wiring harness you have is the correct harness for your Sedona and is working intermittently, you can most likely solve the issue by doing a bit of troubleshooting. Check the ground wire connection first. Make sure it is attached to a clean metal surface that is free of corrosion, paint and primer. Next check the connectors to make sure none of the pins in the connectors are bent and that the connectors are fully seated an the locking tabs are engaged fully. If you cannot get the...
view full answer... - Troubleshooting Trailer Wiring Harness on 2008 Hyundai EntourageThe first thing I'd recommend you do is troubleshoot the wiring harness, I've linked you to an FAQ article that explains how to do this. If you confirm that the trailer wiring harness is faulty, you'd want to remove it before installing the # 118410. It's theoretically possible to simply cut the wires and remove the old converter and splice in the new one. However, the short that damaged the converter box might have been caused by a damaged portion of the remaining trailer wiring, which...
view full answer... - Can I Install a 7 Way Harness and a Brake Controller on a Hyundai EntourageYes, that vehicle can be wired with a brake controller. The vehicle would not be pre-wired, so you would have to hardwire the controller. We have an installation instruction page that describes how to do this and I will provide a link to it below. As the help page mentions, you will need a brake controller, and 4Way Trailer harness, use T-One harness part # 118410, and a 7Way, like part # ETBC7. I will add a link to a page that has all our brake controllers.
view full answer... - Installing a 7-Way Trailer Connector on a 2012 Kia SedonaYou are definitely on the right track. You will first want to install a wiring harness with a 4-way flat connector like the Tow Ready T-One Wiring Harness, # 118410, that you referenced. You could simply run lengths of wires from a vehicle side 7-way socket and wire the socket yourself, but that would involve splicing into your vehicles tail light wiring, which I would not recommend. That route would also be very time consuming and tedious. Instead, after you install the plug-in style...
view full answer... - Recommended Vehicle Trailer Wiring For 2011 Kia Sodonna Mini VanYour trailer connector is overloading your wiring in your 2011 Kia Sedona. To protect your wiring, use a powered ModuLite that will protect your system from overload by drawing the power needed from the battery and not your electrical system. If you already have a powered converter, it sounds like it has gone bad and needs to be replaced. I recommend you use the 2011 Kia Sedona T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118410. This will connect to your vehicle...
view full answer... - How to Determine the Tow Package Wire Functions on a 1997 GMC Topkick 6500To determine the wire functions for your 1997 GMC Topkick you will need to test the wires with a circuit tester such as # PTW2993. The reason for this is that there is no standard for wire color/function and even the manufacturer can change the color of a wire if they run out of the regular color they use. All you will need to do is have someone sit in the truck cab and go through the various functions, turn signals, brakes, and so on, while you test the wires with the circuit tester....
view full answer... - Best Way to Route Power Wire from a Tow Ready Wiring Harness # 118410 on a 2008 Hyundai EntourageThe best way to route the power wire from the Tow Ready Custom Fit Vehicle Wiring # 118410 would be to avoid any areas that might pinch or melt the wire. So basically try to avoid moving suspension components and hot exhaust pipes. Usually down a frame rail works best, but every vehicle is different and will require a little bit of improvisation. I attached an FAQ article on how to route power wires from converters boxes also.
view full answer... - What Brake Controller and Module for 1997 GMC Topkick 6500 Towing 10 Ton TrailerDepending on how your Topkick is equipped, you may need up to 3 items to install a brake controller. If the vehicle does not already have a trailer wiring harness you will first need to install a 4-way wiring harness. Since you seem to have a heavy-duty trailer, we recommend a heavy-duty powered converter, # 119290KIT, rated for 15.9 amps. Next you will need a 4 and 6 Way Installation Kit, # ETBC6. I have included a link to the installation details for this item. This will provide a required...
view full answer... - Recommended Curt Hitch for a 2007 Kia Sedona With a Short Wheel BaseThe Draw-Tite Max-Frame Class III Hitch # 75551 is indeed designed to be used with the short wheel base on the 2007 Kia Sedona. If this will be used for towing at some point, I highly suggest going with the Tekonsha Wiring Harness # 118410. This is a custom fit harness that will be mostly plug and play, but you would need to run one wire up to the battery to get the needed power to everything. The 4 Flat plug will fit most small trailers that do not utilize electric brakes.
view full answer... - Will TowReady 4-Pole Wiring Harness # 118410 Work Properly With Efficient LED-Type Trailer LightingThe TowReady 4-Pole Wiring Harness # 118410 is a correct fit for your 2007 Hyundai Entourage and will work fine with high-efficiency LED-type lighting. This harness features a powered converter than draws power for your trailer lights directly from the car's battery, via the kit's included black power wire and fuse holder, without straining the car's own internal wiring. You will not need load resistors or anything else; this was confirmed by my contact at Tow Ready. I have linked both...
view full answer... - Brake Controller Installation on 2012 Kia SedonaHow to proceed from here will depend on what you've completed up to this point. If you've installed a 4-pole already, you'll just need our Brake Controller Install Kit, part # ETBC7. The kit contains everything needed to install the controller, with the exception of the brake controller itself and a functional 4-pole trailer connector on the Sedona. Since I'm not 100 percent positive what you've already completed, I'll start from scratch, and you can disregard the parts that don't apply. The...
view full answer... - Wiring Harness for a 2011 Kia SedonaThe wiring kit you will need for your 2011 Kia Sedona is the T-One Wiring Harness # 118410. This kit will give you a 4-way connector to to power up the lights on your utility trailer. For your trailer you can use the 20 ft. Wishbone 4-Way Trailer Wiring Harness with 30" Ground Wire # A20WB. I've added links to install videos of each of these products as well as a help article on trailer wiring which you may find useful.
view full answer... - Will T-One Vehicle Wiring Harness 118410 Drain the Vehicle BatteryThe T-One Vehicle Wiring Harness # 118410 is not going to drain the vehicle battery unless there is something plugged into the 4-Way that is drawing power. If the power wire for the harness is touching bare metal somewhere it could be shorting and that would draw power. But if it is installed correctly and nothing is drawing power when plugged into the 4-Way then it will not drain the battery because the power has no where to go. The wire that connects to the vehicle battery has to be...
view full answer... - Troubleshooting 4-Way on 2007 Kia Sedona with Only LeftStop/Turn Signal WorkingIt sounds like the wiring for your 4-Way connector is either damaged or the unit itself is worn out. You can try using a circuit tester like part # PTW2993 to pierce the wiring harness at different points (if the wiring itself looks good) to determine where the signal drop off occurs. It is always best to check your ground connection as well. If you are able to locate where the drop off is then you can simply replace the 4-Way with part # 18252 but instead of using the quick splicers it...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2012 Kia SedonaInstallation of the parts for your 2012 Kia Sedona is definitely something you can do. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13345 for your trailer hitch which comes with all the mounting bolts and should take about 15 minutes to install because there are already nuts welded inside your frame so it is simply adding bolts and washers then torqueing them to spec. I've attached a video to assist. For your wiring, I recommend the T-One Vehicle Wiring...
view full answer... - What Wiring Is Needed to Install a Brake Controller # 90885 on 2011 Nissan Frontier w/o Tow PackageFirst thing you will need is a 4-way connector at the rear of your 2011 Nissan Frontier. For that you will need a Tow Ready Wiring for the Nissan Frontier, part # 119176KIT. I attached installation instructions and a video of this product being installed onto a similar vehicle as yours below. Once you have a 4-way it will be time to install an Brake Controller 7 & 4 Way Installation Kit, part # ETBC7. This will give you a 7-way connector at the rear of your vehicle once installed. I attached...
view full answer... - Trailer Hitch Recommendation for a 2012 Kia SedonaThe CurtTrailer Hitch Receiver, part # C13345, would work well for your 2012 Kia Sedona. You may also be interested in the following products to complete your towing setup: Tekonsha Trailer Wiring # 118410 Ball Mount 2-3/4 inch Rise or 4 inch Drop # 2753 Hitch Ball with 2 inch Diameter and Medium Shank # 19247
view full answer... - Recommended Trailer Wiring Harness for 2007 Kia SedonaThe Curt converters do sometimes have issues, but Curt is good with their warranties if you are still within its limits. If you are ready to move onto another brand, I recommend for your 2007 Kia Sedona that you use the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118410 instead. We have had great customer reviews with this harness.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane H
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video by:
Andrew K
Video by:
Kathleen M
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Dustin K
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
11/10/2023
Its been a year and the wiring kit has been working with no problems.