T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(1184 reviews)
Price: $34.35
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118336
Our Price: $34.35
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1184)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118336
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- Tekonsha
- Converter
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point in rear cargo area
- Plug in connector
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 4 amps per circuit
- 1-Year limited warranty
Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
118336 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
This Product Fits The Following Vehicles
- 1994 - 2002 Honda Accord Sedan
- 1997 - 2003 Acura CL
- 1997 - 2006 Honda CR-V
- 1997 - 2006 Honda CR-V
- 1993 - 1997 Honda Del Sol
- 2003 - 2004 Honda Element
- 2003 - 2004 Honda Element
- 1994 - 2001 Acura Integra Hatchback
- 2001 - 2006 Acura MDX
- 2001 - 2006 Acura MDX
- 1996 - 1999 Isuzu Oasis
- 1999 - 2004 Honda Odyssey
- 1995 - 2004 Honda Odyssey
- 2003 - 2008 Honda Pilot
- 2003 - 2008 Honda Pilot
- 2001 - 2001 Honda Prelude
- 1996 - 2001 Acura RL
- 1996 - 2003 Acura TL
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Defective
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118336
Average Customer Rating: 4.9 out of 5 stars (1184 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.by: Dale02/03/2024
Greetings, the plug was easy, the play not so much. After renting a bike trailer from U-Haul the park lights didn’t work. Returning home I bought a flat four plug tester, park lights weren’t working. I wrote their web site to give them a chance to correct it before this review, no response. Not very pleased…hopefully I’ll hear something now
by: CW03/26/2014
1993 Honda Pilot
On '93 Honda Pilot, installed wiring harness in about 20 minutes. Also installed Draw-Tite tow bar (75599) and Tow Ready 4-Flat Universal Mounting Bracket (118149) to stow wiring harness plug. None of the wiring harness is visible from rear of vehicle with only 4 - 6 inches underneath. All of the wire is tucked away in rear threshold where I found two grommets leading underneath the vehicle. After cutting out a space in the grommets for the wire harness to run I reinstalled grommets back into place. Very neat install, wire is snug behind threshold where plug was located. Worked as advertised.
Cw
3/27/2015
No problems at all one year after the install.
by: Chris07/16/2019
I didn't have to pull off the rubber door gasket but I did have to remove the plastic piece across the back which broke the plastic fasteners. I think I needed a Phillips screwdriver and 10 mm socket wrench. I used the double stick tape that came attached to the module and didn't bother with the screw, where it is located I don't think is going to move. There is a cigarette lighter socket that should be removed before pulling the panel out but even without taking that step it wasn't hard to straighten the tabs and plug it back in to the connector.
About a 20 minute job, not difficult.
Christopher M.
7/18/2020
Still working well after a year.
by: John K.08/20/2014
2000 Honda V6
I had an old wood stove that needed to be transported to the metal scrap heap at the local landfill. The hitch and drawbar were already in my possession but I needed trailer wiring for a rental trailer. I looked at the trailer rental store's offering of a generic harness that involved splicing as part of the installation process; I suppose it would work just fine but this product seemed to be much easier to install. After the removal of three trunk lining fasteners I had access to the wiring plug that is standard issue for my Honda. I connected the etrailer mating half of the plug to the Honda plug, fussed with the location of the "box" and the wiring a little and I was done except for verifying with a voltmeter that all the functions were working. When not in use the bulk of the wiring is hidden in the spare tire well underneath the trunk floor panel.
This harness works just fine on my 2000 Honda V6. I'm happy.
by: Dan04/13/2019
2003 Honda Pilot
The trailer wiring harness was a great solution and I have attached some pics of how i ran the wires for the installation. I found some access holes in my 03 Honda Pilot to avoid pinching the wires in the liftgate.
by: Ed02/13/2021
The trailer wiring harness worked perfectly. Getting the panels off my Honda Element was a job but the wiring harness worked as intended.
by: Somsankar04/08/2022
The hitch is compatible to Honda CR-V (model 1998) and apparently fits well. One must be careful to adjust the exhaust system and check the engine rotation for smooth operation, otherwise it could produce noise. The electrical wiring is easy to install with little effort. My purpose is specifically to haul garden and landscaping items and this is a worth spending.
by: Charles 08/18/2022
Such an easy installation. Directions were spot on.
Charles
8/19/2023
I have been using this harness for a year with a small utility trailer and my Honda CRV. Easy installation with very clear photos and instructions worked great for me. Quick response and delivery from etrailer was great.
Mike L.
9/13/2023
@Charles Great, thanks for checking in!
by: Dave O07/10/2015
2006 Honda Pilot
I installed the 4 pin quick connect harness and the ETBC7 universal 7 pin kit on my 2006 Honda Pilot EXL to get it ready for towing our popup camper. The instructions are clear and the installation was fairly easy but did take over 4 hours start to finish. Connected to a tekonsha voyager BC taken from our old tow vehicle. The installation looks professional, I know it was done right, and saved about $200.
by: Amy 1970 Dune Buggy02/27/2017
Honda CR-V
Haven't fully tested it, but installation was easier than anticipated. I recommend watching the video for options for routing the wires to the storage compartment in the CR-V. I cut a small slit in the corner, closest to the bumper, of the storage compartment and pulled the wires through. Honda provides a great place to store the wires! -A.
by: Henry08/31/2019
2004 Honda CR-V
amazing hitch Perfect fit made with high quality and very easy install, from all the hardware necessary to tools to make the job even easier, all wiring was plug and play and very detailed instructions, I wouldnt buy from anyone else!
by: Steve02/09/2024
Simple install - works great, not much else to say here...
by: Edwin03/27/2022
Easy installation, works great. Very satisfied with the wiring harness.
Edwin
3/27/2023
Excellent product still, I would buy another one for my next car as well.
by: Timothy 02/25/2024
2007 Honda Pilot
Fast fast delivery. Solid product. They go the extra miles to include helpful videos. Id recommend
by: Eamon01/05/2021
Items were packed pretty well, nothing seemed to have moved or been damaged during shipping. Part fit as good as OEM, all hardware was correct and the harness fit perfectly.
by: Walt M.06/24/2017
2006 Honda CR-V
This hitch was exactly as advertised and fit my CRV perfectly!!! Used spray bottle with soap & water to lube the two upper muffler rear hangers and they slid off with little prying needed (did not need to remove the lower hanger in front of muffler). etrailer's installation videos for installing both this hitch and corresponding 118336 wiring harness were spot-on and very helpful (also a good video on the Curt website). Took my time tightening the hitch bolts to specs which was a bit awkward until I thought to use my ratchet extension bars. Maybe the easiest "car repair" I've ever done, and probably saved a lot of $$$ doing it myself. If you can change your oil, you can do this installation no problem!
Also, etrailer promptly shipped this product for free (thanks, guys!) and it got here a day early. GREAT COMPANY! When I save up enough to buy roof rack rails in the near future, I'll be back...
by: Jeff03/12/2015
1995 Honda Accord
Had to be the easiest trailer wiring I have ever done
by: Barry 06/26/2023
2005 Honda Pilot
Product functioned as expected. The fact that harness can be stored in vehicle is good. Thanks
by: MoHusker09/08/2017
2008 Honda Pilot
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
Mohusker
9/8/2018
All products holding up well. Easy install, good quality. Works as advertised.
by: Richard03/17/2017
2004 Honda Element
This was pretty easy to install and works great on my trailer. The installation instructions were not exactly correct for my 2004 Honda Element AWD Ex. The number of screws and plastic plugs that needed to be removed to pull the passenger side trim panel clear to access the vehicle's connector did not match the instructions. I found it essential to unbolt the right rear shoulder strap from the floor of the vehicle. This allowed much better access to the wiring behind the panel to plug in the connector for the harness. The adhesive on the black box that comes with the harness was weak, and didn't stick to anything behind the panel.
Richard
3/17/2018
Yes I still like them!
by: Bret B.05/22/2014
2003 Honda Pilot
Great product! Installed on a 2003 Honda Pilot. Easy installation. Removed trim plate at rear of cargo area without any tools. There was a plug under the plate that you simply plug the wiring harness into. I leave the wiring harness in the storage area for the head rests when not in use. When I need it I pull it out connect it to my trailer and gently close the rear tailgate on the wires.
Bret B.
5/26/2015
Yes I am still completely satisfied with both the hitch and wiring harness.
by: Joe B11/03/2016
Honda Pilot
I wrote about the wiring harness in my review of the hitch installation. Many talked about how difficult it was. I followed the directions for my Honda Pilot and found it very quick and easy. It stows in the compartment with the head rests and I pull it out when I need to hook it up. Pretty simple. If only it could be accessible right at the receiver without hanging out the rear hatch it would look a lot better. Picky, picky, picky. But, that's why I gave it a 4 out of 5. The etrailer staff were extremely helpful and quick to respond with precise info. Thanks folks.
Joe B.
11/15/2017
Everything is still working as expected.Thank you for being there.
by: Bill G08/08/2015
1999 Honda Odyssey
Had weird acting trailer lights for quite awhile. When I checked voltages at the vehicle I noticed low voltages for one of the TS. I suspected the 4 way adapter that was installed in 1999 Odyssey. I purchased this one from eTrailer, hooked it into the van and it fixed the issues. The trailer lights are now rock solid. I guess the TS converter on the old one had an issue. All is well now.
Bill G.
8/8/2016
Still working great, no issues :
by: Donald05/29/2016
Pontiac Trans Sport Van
The wiring harness plugs right in to the wiring in the aft area of the Honda. It is there as a backup if I need to transport my Demco dolly behind the Honda it usually carries behind my bus. It was also shipped with the hitch and receiver..new in the box and well packed. I'm very satisfied with the products and service from E=trailer.
Donald
1/26/2018
Yes, everything is working perfectly.
by: Andres P10/02/2019
1995 Honda Accord
Excellet plug and play , fast shipping, well packaged, would buy from again!
25
1184
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- What is the Towing Capacity of Trailer Hitch for 2003 Acura MDX?Both the Curt # 13328 and Draw-Tite # 75599 are Class III hitches that have a 350 lb tongue weight capacity and 3,500 lb towing capacity. I also checked the owner's manual for a 2003 Acura MDX and it states that the maximum total trailer weight you can tow is 3,500 lbs with up to 3 passengers in the vehicle though it reduces with more passengers. Because both hitches have the same capacities I recommend going with the Curt # 13328 because it will fit with a full-sized spare tire under...
view full answer... - Will etrailer Trailer Hitch e98851 Work With Full Sized Spare Tire On 2004 Acura MDX?It sure will! The etrailer Trailer Hitch Receiver # e98851 you were looking at for your 2004 Acura MDX is designed to be compatible with a full sized spare tire. If you are planning on towing with your MDX you will also need a vehicle wiring harness # 118336, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900. I included a link to the written instructions of the # e98851 and videos for the other products mentioned for you...
view full answer... - Hitch Recommendation for a 2005 Honda PilotFirst thing you would need on your 2005 Honda Pilot would be a hitch. For that the Draw Tite Hitch part # 75599 would be a great option. I attached an install video for you to check out as well. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage...
view full answer... - Locating Install Harness for Trailer Wiring in a 2000 Honda CR-VIt sounds like your 2000 Honda CR-V is set up like the newer CR-Vs and the harness is actually behind the rear threshold. Check out the video I attached for more info on this. This harness fits several vehicles and all of them have different places that they hide the harness so I would check out the install instructions to see where the harness is typically located in other vehicles to give you more places to look.
view full answer... - Trailer Hitch and Wiring Recommendation for Towing Trailer with 1999 Honda CR-VThe Curt hitch part # 13314 is a confirmed fit for your 1999 Honda CR-V and would work well for towing a small utility trailer like you mentioned. You would not need the part # PSA256S0303 as the trailer rental place would already have a coupler installed on the trailer. You will need trailer wiring, for that you would want the # 118336 which is a confirmed fit. The trailer rental place could possibly have a ball mount that you could use, but if not we have a solution. You might be interested...
view full answer... - Installing a Brake Controller from Scratch on a 2004 Honda PilotYou are correct, the ETBC7 does not come with written installation instructions because it can be used with so many different vehicles and brake controllers. But I will be happy to provide you with step by step instructions on installing the 7 and 4 Way Installation Kit, # ETBC7, on your 2004 Honda Pilot. I will also provide a helpful FAQ article and a video install of an ETBC7. The first thing you will need as you have pointed out is the correct 4-Way wiring harness if not already installed...
view full answer... - Trailer Wiring Harness and 5-Way Flat Adapter for a 2003 Honda Odyssey Towing a Boat TrailerFirst, you will need to install Trailer Wiring Harness # 118336 on your 2003 Honda Odyssey. I have incldued a link to the installation instructions and a link to a video showing a typical installation for you to view. Since the boat trailer has a 5-Way flat connector, the 5th wire is probably for an electric reverse lockout. You will need to add 4 Pole to 5 Pole Trailer Wiring Adapter, # 20036. The additional blue wire will connect to the reverse light circuit behind one of the vehicle...
view full answer... - Will Curt Trailer Hitch Receiver C13204 Fit 2007 Honda Pilot?I have another option for you, but the Curt Trailer Hitch Receiver # C13204 you mentioned is only confirmed to fit the 2010 - 2020 Nissan Rogue. For your 2007 Honda Pilot I recommend the Draw-Tite # 75599 which is a confirmed fit for your vehicle. This is the only hitch that will work with a full sized spare tire while not requiring trimming to the fascia. If you are planning on towing with your Pilot you will also need a vehicle wiring harness # 118336. I included videos for both of...
view full answer... - Is Trailer Wiring Harness Included with Curt Hitch Part # 13328Wiring harnesses are not included with Curt hitches. Hitches include the hardware needed to mount the hitch to the vehicle. Some Hidden Hitch models will included a draw bar and pin and clip. There are a handful of Valley hitches that have integrated wiring. For your 2005 Honda Pilot, you would use either part # 118336 or part # 33105 for a trailer wiring harness.
view full answer... - Trailer Hitch Installation Instructions and Ball mount, Hitch Ball, and Wiring for 2000 Honda CR-VYes, the Curt Trailer Hitch, # 13314, does come with installation instructions and the required mounting hardware. I have included a link to the installation details below. If you plan on doing some towing, the recommended ball mount is # 2753 and you can use hitch ball # 19260 (1-7/8 inch diameter), # 63845 (2 inch diameter), or # 63853 (2-5/16 inch diameter). For trailer wiring, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118336, is the correct harness for...
view full answer... - Trailer Hitch Installation Difficulty on a 1997 Honda CR-VWe rate hitch installation difficulty based on how long it would take the average do-it-yourselfer who had all the required tools and perhaps a helper. We have rated the Draw-Tite Trailer Hitch, # 24790, for the 1997 Honda CR-V, a 5 out of 10 meaning that it will take about 50 minutes or so to install the hitch. I have included a link to the installation details below. If you plan on doing some towing with this hitch, Draw-Tite recommends only using ball mount # 3590. You can use hitch...
view full answer... - Does Trailer Hitch for 2008 Honda Pilot Come with EverythingFor just a hitch for your 2008 Honda Pilot all you would need is the Curt # 13328 which comes with everything you'd need to install. You might be asking if this comes with trailer wiring, which it does not, so if you needed that as well you'd want the Tekonsha kit part # 118336 which is very reliable and easy to install.
view full answer... - Will Draw-Tite Trailer Hitch Mount Cargo Carrier # 6502 Fit a 2001 Honda OdysseyThere is an important measurement you are going to want to take prior to choosing any hitch mounted accessories. On your trailer hitch, measure from the center of the hitch pin hole straight back to the distance required to clear the rear bumper. On Class III hitches we have installed on the same generation Odyssey as yours the measurement was approximately 5 to 6 inches. For the Draw-Tite cargo carrier # 6502 it measures 13 inches from hitch pin hole to the closest part of the carrier...
view full answer... - Recommended Hitch and Towing Items for 2003 Honda Element Towing Motorcycle TrailerThe online edition of the owner's manual for the 2003 Honda Element indicates on page 191 that the maximum trailer weight this car can tow is 1500-lbs. This means your trailer should not weigh more than about 650-lbs; otherwise the total combined weight of Harley and trailer will exceed the vehicle capacity. An aluminum motorcycle trailer should be okay in this respect but check to be certain. Since your Element can be fitted with either a 1-1/4-inch Class I or a 2-inch Class III hitch...
view full answer... - Hitch Recommendation for a 2003 Honda OdysseyWe have everything you will need. Let's first start with a hitch for your 2003 Honda Odyssey. For that the Class III Curt hitch part # C13068 would be a great option as it would have plenty of capacity. Next you will want to get a ball mount. When towing a trailer you want to get a ball mount that will allow the trailer to be towed as level as possible. To see how to pick out the correct ball mount you will need to check out the help article I attached. You will need to know the distance...
view full answer... - Bike Carrier Options for 2 Bikes on a 2001 Honda CR-VWe do have options for you to carry a 2 bike rack on your 2001 Honda CR-V, however, a trunk mounted bike rack will not fit on your vehicle. The rear mounted spare tire will not allow a trunk mounted bike rack to mount safely. Instead, I would recommend either a spare tire mounted bike rack or adding a trailer hitch and a hitch mounted bike rack. For your vehicle you can use the Thule Spare Me 2 Bike Rack, # TH963PRO. The mounting plate for this bike rack will mount between your vehicle...
view full answer... - Brake Controller and 7-Way Trailer Connector Install 2006 Honda PilotWe have a Brake Controller Installation Guide which will help you through the process, I will provide a link to the guide below. As a first step, you would need a 4-way connector on your vehicle to provide lighting for the trailer. For your Pilot, I would recommend the T-1 Vehicle Wiring Harness, part # 118336. You would then need an adapter to convert the 4-way to a 7-way. If you are wanting to install a brake controller to actuate trailer brakes, we offer a brake controller installation...
view full answer... - Will Curt Trailer Hitch # C11290 Fit on a 2001 Honda Accord Coupe and Other Parts for TowingYou have the right hitch. The Curt Trailer Hitch # C11290, will work on all models of the 2001 Honda Accord. I have included a link to installation instructions for you to review. Along with the hitch you will need the following items to complete your towing setup. A Properly Sized Hitch Ball, 1-7/8 inch, item # 19256, or 2 inch, item # 19258 Draw-Tite Ball Mount, # 3592 Wiring, item # 118336 You may also be interested in a hitch lock, item # e98879, to secure the ball mount in your...
view full answer... - Parts Needed to Tow Trailer with 2001 Acura TLFirst things first I want to thank you for your service. Now for the parts needed to tow a trailer with your Acura TL you are on the perfect track! The Curt Class I Frame Receiver Hitch # C11290 that you referenced is confirmed to fit your 2001 Acura TL and is It features a 2,000 pound towing weight capacity and a 200 pound tongue weight limit. I have attached the installation instructions that you can take a look at as well. For trailer wiring I recommend the Tekonsha T-One # 118336...
view full answer... - Hitch, Wiring and Brake Controller for 2006 Honda Pilot Without Factory Tow PackageWe can help you get your 2006 Honda Pilot set for towing, with a hitch, wiring and trailer brake controller. For a brake controller I recommend the Prodigy P2 # 90885 that you referenced. This unit sets the benchmark for reliability and ease of operation, including some features that make set-up and ongoing use a lot easier. You will wire this in the Pilot using our brake controller install kit # ETBC7, which includes all the wire, 7-way socket and other components needed to install the...
view full answer... - Troubleshooting Trailer Lights Not Working After Installing Vehicle Wiring and Rewiring TrailerLet's start troubleshooting by eliminating the trailer, so we can tell if the vehicle wiring harness that you purchased, item # 118336, for your 2003 Honda Pilot is working correctly. Unplug the trailer and use a circuit tester, item # PTW2993 if needed, to test the connector at the back of the vehicle. Have someone apply the brakes, turn signals and turn the running lights while you are testing. If the 4-Way does not function correctly when performing this test, go to the wires that are...
view full answer... - Will a Trailer Hitch from a 2003 Honda CR-V Fit a 2003 Honda PilotWe do have trailer hitches for the 2003 Honda Pilot but Curt hitch # 13535 only fits the 2002 to 2006 Honda CR-V. The Pilot and CR-V do require different hitches. The comparable Curt hitch for the 2003 Honda Pilot is # 13328. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also...
view full answer... - Is there a Difference Between the Curt and Tekonsha Trailer Wiring Harnesses for a 2004 Honda PilotAs far as how the Curt and Tow Ready trailer wiring harnesses for the 2004 Honda Pilot function and install they are the same. The guts in each of the converter boxes is not quite the same. The Curt harness # C55336 uses surface mount circuitry meaning components are soldered directly to a circuit board. The Tow Ready/Tekonsha harness # 118336 uses through-hole circuitry which you have probably seen before in just about everything. If it were me I would go with # 118336 because we here...
view full answer... - Trailer Wiring Harness Fit Recommendation for 2005 Honda CR-VFor trailer wiring confirmed to fit your 2005 Honda CR-V you would want the Tekonsha kit part # 118336 which is a confirmed fit. It comes with a converter box and installs very easily by plugging right into a factory port at the rear of your vehicle. I attached an install video for this kit on a similar 2005 Honda CR-V as well.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Test Fit:
Nicholas E
Test Fit:
Shane T
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
2/5/2024
There are a couple of reasons that this harness would not be working. Have you had a chance to check the wires on the vehicle side, as well as the trailer side? If not, I would highly recommend using a circuit tester, like part # PTW2993 to test the wiring on both sides. Also, be sure to test the wiring going to and from the converter box. First test the wires going into the converter box. If they are fine, move onto the wires coming out of the converter. If you have power coming into the converter but not out, then we will need to get a replacement out to you, because the converter is bad. Let me know if this helps.