T-One Vehicle Wiring Harness with 7-Way Trailer Connector
(85 reviews)
Price: $52.68
In Stock
T-One Vehicle Wiring Harness with 7-Way Trailer Connector
Item # 118287
Retail:$68.92
Our Price: $52.68
You Save: 24%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (85)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118287
- Custom Fit
- Trailer Hitch Wiring
- 7 Round - Blade
- No Converter
- Tekonsha
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Features:
- Provides a 7-way, blade-style trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 4-pole, 5-pole and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point under vehicle
- Plug in connector
- Constructed of 16-gauge bonded wire
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located just beneath your vehicle, on the driver's side.
Once installation is complete, the 7-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 7-pole connector itself - to help prevent corrosion.
118287 Tekonsha T-1 T-Connector - 7-Way
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2024 Buick Enclave
- 2018 - 2023 Chevrolet Traverse
- 2024 - 2024 Chevrolet Traverse Limited
California residents: click here
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
T-One Vehicle Wiring Harness with 7-Way Trailer Connector - 118287
Average Customer Rating: 4.7 out of 5 stars (85 Customer Reviews)
Quickly and easily install a 7-way, RV-style trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.by: Debbie03/11/2024
Great product and great price! No issues since installing on my 2022 Buick Enclave!
by: David02/15/2023
Hi. Carol C
I received package yesterday afternoon the box was opened and the the two items were crushed the wiring harness wasn't opened but the mounting bracket was there was a small clear bag with a few screws and the bracket in the box not sure if that's all the parts . The trailer hitch was ripped through the shipping box. Please look at pictures to see if all parts are there . Just need confirmation so when I install everything is good to go.
by: Dennis 07/08/2023
Wiring harness fit and easy to install
by: Aaron 08/25/2023
Easy to install and works flawlessly!
by: Robert G06/19/2023
Product was perfect, shipping was beyond slow, took almost a month to receive this item when it stated was in stock. That needs to improve at this point of having to wait we could have went to dealer to purchase.
by: Rob 08/05/2023
2021 Chevrolet Traverse
Fast, easy online order- timely delivery and good pricing.
by: Mark B12/01/2020
2019 Buick Enclave
This is a first-rate product. Very simple to install, since I already had the fascia off to install the hitch. My 2019 Buick Enclave already had the vehicle connector, so it was just a matter of locating the connector, removing the dummy plug and plugging in the trailer harness. I used this harness in conjunction with the Curt Trailer Hitch (Item CU29FR), the short no-drill mount (Item 18140) and the Pollak 7-pin mounting bracket (Item PK12711U).
My only complaint is that the harness is much longer than it needs to be, but too long is obviously better than too short.
by: Dennis05/09/2020
2019 Chevrolet Traverse
I purchased a draw-tite hitch, wiring harness, motinting bracket and dielectric grease for my chevy traverse. I am very pleased with quality of these products and service. I do not usually take the time to write reviews, unless the company really impressed me. I am impressed how quickly they got this heavy package to me. They put together excellent installation videos on how to successfully install everything yourself. They delivered great customer service when I reached out to them on missing hardware for the wiring harness mounting bracket. They promptly send me the missing parts. I will come back to etrailer in my next hitch project.
by: Jason11/02/2021
when I installed the 7 pin wiring harness , it stuck out too far for the hitch cover that attaches to the bumper. however I spun the bracket 180 so it was indented, thus allowing cover to fit. Maybe something to mention.Again overall, super happy with how fast the receiver was shipped. Looks great. While not been used yet, it was a great experience installing myself.
by: Greg W12/22/2020
This work great, fit perfectly matched with the dielectric grease made a great weather tight connection. I did have to reverse the bracket to allow it to fit with the bumper cover.
Wish I had ordered the grease and bracket at the same time as recommended, my mistake which delayed the installation.
by: Kelley12/12/2020
Easy to install. However, the 7 way plug and wiring harness did not fit as advertised. We had to rig it differently so that we could put the bumper cover back on. Instructions were clear and concise, just didn’t fit perfectly.
by: Don Sz08/10/2019
2019 Chevrolet Traverse
We purchased a Draw-Tite hitch for a 2019 Traverse. Everything fit perfectly. I had a question about hooking up the 7 way plug cable and the support tech directed me to a video showing how to install the cable. Great service. Thank you!
by: Rafe07/09/2020
This wiring harness fit my 2020 Chevy Traverse LT, 3LT perfectly! I was able to get the the factory wiring harness without removing and of the panels, rear bumper, or rear facia. It was a quick plug and play installation. Just unhook the plug on the factory harness and insert this harness in its place. The factory harness is located right below the rear driver’s side taillight. I highly recommend this connector for it’s ease of use and the build quality!
by: Garry11/26/2020
The advice and help from etrailer is the reason I purchased everything I needed to install a hitch. I highly recommend etrailer
by: Emanuel 02/05/2023
Chevrolet Traverse
Fits My Traverse perfectly
by: Ronald 04/19/2023
Works perfect
by: Ted 10/19/2022
Buick
Just what I needed for my 2019 Buick En clave
by: Eric01/12/2020
EASY INSTALL FOR HITCH, ALTHOUGH THE 7 WAY WIRING HARNESS 118287 DOES NOT ALLOW FOR THE CENTER PANEL TO GO BACK ON. BRACKET IS HOPKINS HM48625 AND IT SHOULD INCLUDE HARDWARE.
by: Don B05/04/2020
Received this product and installed it. It is extremely easy to install as the harness plugs directly into the manufactures plug and works very well. I would definitely purchase another if the need arises.
by: Kevin10/04/2019
2020 Chevrolet Traverse
The wires on the plug are so long and it was difficult to get it to stay in place in order to reinstall the bumper. I had to wrap it around the hitch and then fold the rest onto itself and zip tie it in place.
Don't bother wasting your time with this garbage!
by: Michael 12/14/2021
In my application I had to modify the mount to get the hitch cover to fit when not in use.
by: Leonard 07/02/2020
Received my trailer wiring before expected. Ashley and E trailer have saved my holiday. Thank you
by: Timothy 07/26/2020
Worked as advertised. eTrailer did a good instructional video on how to install on my vehicle that made installation easy. Thank you.
by: Matthew 11/05/2021
Perfect trailer hitch at a great price.
by: Ryan06/04/2021
Easy install and works just fine. Come here for all of my trailering needs, which is often lol.
25
85
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Is Factory or Aftermarket Tow Package Better for 2020 Chevy TraverseI highly recommend using the Curt Trailer Hitch # CU29FR and either the 4-Way T-One # 118761 with mounting bracket # 18144 or the 7-Way T-One # 118287 with mounting bracket # PK12711U over the GM tow package for your 2020 Chevy Traverse. Sometimes the factory tow package will include specific things like an additional transmission cooler but from what I could find GM doesn't say that the towing weight ratings for your Traverse are dependent upon their tow package or not. With this being...
view full answer...
- Are Fuses or Relays Needed to Install T-One 7-Way Connector on 2018 Chevy TraverseThere are no relays or fuses required to install the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118287 on your 2018 Chevy Traverse. It will simply plug into a harness under your vehicle and that's all there is to it. I have added a link to the instructions as well as a video installation for you to check out of the T-One Vehicle Wiring Harness # 118287. To complete the towing setup on your 2018 Chevrolet Traverse I recommend the Curt Trailer Hitch Receiver # CU29FR...
view full answer... - Does 7-Way Sit Behind Fascia With Hitch on 2020 Chevy Traverse With Tow PackageThe Curt Trailer Hitch Receiver # CU29FR for your 2020 Chevy Traverse is recessed pretty far back, so you should not have any issues replacing the fascia after installing the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118287. I do recommend going with the shorter bracket for this, the No-Drill Mount for Electrical Mounting Bracket - Short # 18140 with the 7-Way Mounting Bracket # PK12711U. When plugging the 7-way into the factory socket of your Traverse, you will want...
view full answer... - Recommended Receiver Hitch, Wiring and Brake Controller for 2022 Chevrolet TraverseFor your 2022 Chevrolet Traverse, I recommend the etrailer Trailer Hitch Receiver, # e56YR. This is a matte black finished Class III hitch with a spec rating of 5,000 lbs. for max GTW and 750 lbs. tongue weight, but always refer to your vehicle specific owners manual for the vehicles max specs for towing. It is a custom fit bolt-on model that comes with all needed hardware and lifetime technical support from the experts at etrailer. Made in USA. You will need a ball mount, such as...
view full answer... - How To Use Tekonsha Primus IQ Trailer Brake Controller On a 2020 Chevrolet TraverseThe Tekonsha Primus IQ Trailer Brake Controller part # TK90160 is a great option for a 2020 Chevrolet Traverse and it will offer plug-n-play installation when used with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # 3026-P. If you don't already have a 7-way, the T-One Vehicle Wiring Harness with 7-Way Trailer Connector part # 118287 is also a plug-n-play fit.
view full answer... - How to Add a 7-way and 4-flat Wiring Harness to a 2000 Chevy Silverado Since your 2000 Chevy Silverado has the factory wiring harness, you will need the Reese Multi-Plug Wiring Harness for Factory Tow Package item # 74682. This harness will plug directly into that OEM port and give you both a 7-way and 4-flat connector. I have linked an installation video below. You will want to confirm that your truck has the same connector as the one in the video. If you do not have this OEM port than you will need two separate parts to give you a 7-way and 4-flat connector....
view full answer... - Recommended Trailer Hitch Receiver and 7-Way Wiring Harness For a 2023 Chevrolet TraverseI recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver # 76184 on your 2023 Chevrolet Traverse. This receiver is designed to install behind your rear fascia and is accessible by the removable panel on the rear fascia. It has a welded tab which will allow you to install a Mounting Bracket # PK12711U to attach a 7-way connector. The T-One Vehicle Wiring Harness # 118287 will allow you to add a 7-way connector to your Traverse. An Adapter # 78118 can be used when towing smaller...
view full answer... - Parts Needed to Add 7-Way Trailer Wiring Harness to 2019 Chevy TraverseIf you wanted to install a 7-way on your 2019 Chevy Traverse without current trailer wiring all you need is the T-One 7-way kit part # 118287 and you'd be set. This plugs right into the trailer wiring port at the rear of your vehicle and will give you a fully functional 7-way. I attached an install video link for this kit for you to check out as well.
view full answer...
- Installing Tekonsha Prodigy P3 Brake Controller on 2018 Buick EnclaveThe Tekonsha Prodigy P3 Trailer Brake Controller # 90195 referenced in your question is an excellent choice and exactly what I would have recommended. There is not a built-in brake controller port on your 2018 Buick Enclave that will allow for installation with a Plug-In Adapter, however all the needed wires should already be run under the dash. In order to install the P3 brake controller, you will just need to connect the 4 wires from the controller to the 4 blunt-cut wires that will...
view full answer... - Parts Needed to Tow a 5000 Pound Travel Trailer with our 2021 Traverse AWD LT 3LTTo figure out how much your 2021 AWD LT 3LT can tow, you will need to check the inside door jamb on the driver side. There will be a sticker with all the capacities the vehicle can handle. If it does say you can handle the 5,000 pounds, the Curt # CU29FR will definitely be a good option. This is rated up to 5,000 pounds towing and 750 pounds of tongue weight. You will also need some wiring to get all the lights working, but this will depend on if the trailer has brakes or not. If the...
view full answer... - OEM Versus Aftermarket Trailer Hitch and Trailer Wiring Harness for 2020 Chevy TraverseHonestly speaking, the primary difference is the mark-up the car stealership charges you. A few years back the OEM hitches did have an aesthetic advantage for many vehicles, such as the Traverse. The OEM hitches installed behind the bumper, and were partially or fully concealed. Many folks didn't like the appearance of a big hunk of metal (the hitch) hanging below the rear bumper, so they accepted the extra cost of the OEM offering and went on about their business. These days it's a new...
view full answer...
- Recommended Trailer Hitch and Wiring Harness for a 2022 Buick EnclaveThe trailer hitch I recommend for a 2022 Buick Enclave is the etrailer Trailer Hitch Receiver part # e56YR. This hitch installs behind the bumper so it will be completely hidden while not in use. It features a bolt-on install without any drilling required. It has a class III rating with a 2" opening that will be great for hitch mounted accessories like bike racks and cargo carriers or for towing. If you will be towing then you'll also need a few other things such as the T-One Vehicle...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for Towing With 2022 Chevrolet Traverse PremierWe can definitely get you set up for towing with your 2022 Chevrolet Traverse. For a hitch I recommend the Curt Trailer Hitch Receiver # CU29FR. This Class III hitch has a 2" receiver with a maximum gross trailer weight of 5,000 lbs and tongue weight of 750 lbs. It features a concealed cross tube and will be completely hidden with the rear bumper panel installed just like the factory hitch. This hitch is also compatible with weight distribution should you need it in the future. For the...
view full answer...
- Is Curt Trailer Hitch # CU29FR a Good Fit for a 2018 Chevy TraverseThere actually isn't a problem with the hitch, # CU29FR, for the 2018 Chevy Traverse. We have had so many more people have no problems at all than those that did so I think I can explain what happened in those 2 issues. While I can't say why the one customer had such a hard time removing the fascia but as far as the alignment issue that was mentioned there is a simple explanation. Basically, hitches can flex. And when they get tossed around in the shipping process it can cause the holes...
view full answer... - Installation of P2 Brake Controller in 2022 Chevy Traverse With Factory Tow PackageWe can help get the Tekonsha Prodigy P2 Trailer Brake Controller, # 90885 connected to your 2022 Chevrolet Traverse. But there is not a simple plug-in wiring adapter such as the # 3026-P available. From our Tech Support contact at Tekonsha they informed us that when GM changed the wiring of the platform the Traverse is built on, the previously used wire adapter no longer works so you need to use the following parts and steps: T-One Vehicle Wiring Harness with 7-Way Trailer Connector,...
view full answer... - Trailer Wiring for 2020 Chevy Traverse with 7 and 4 Pole ConnectorsI do have a way for you to have a 7-way and 4-Pole connector on your 2020 Chevrolet Traverse, but there isn't a wiring harness for your car that comes with both plugs. You can use the T-One Vehicle Wiring Harness # 118287, which is confirmed to fit your Traverse, and plugs directly into your factory harness. You can then use the Hopkins # HM40975 in place of the 7-way socket that comes with the harness. The # HM40975 also comes with a mounting bracket to easily attach it.
view full answer... - Recommended Trailer Wiring Harness for 2018 Chevy Traverse For your 2018 Chevy Traverse I recommend the Tekonsha T-One Vehicle Wiring Harness # 118287 if you need a 7-Way connector or the Tekonsha # 118761 if you need a 4-Way connector. These are both custom harnesses that will install by simply plugging into a factory port beneath the vehicle on the driver's side (see attached image). I recommend these over the Curt options that are also available for your Traverse because of Tekonsha's reputation for producing extremely reliable products. We...
view full answer...
- Which is Better GM Factory or Aftermarket Hitch and Wiring on my 2020 Chevrolet TraverseI looked up what the GM trailer towing package includes for your 2020 Chevy Traverse, and it gives you a hitch that installs through the rear bumper panel of the vehicle just like our Curt part # CU29FR and a 7-way trailer wiring connector just like our # 118287 we just offer it at a much better price! In my opinion it makes more sense to go with the towing products we offer as it's the same if not better quality. If you wanted to do some towing, you might be interested in etrailer ball...
view full answer... - What Trailer Hitch / Wiring Harness Will Work On My 2021 Chevrolet TraverseWhen it comes to installing a trailer hitch on your 2021 Chevrolet Traverse I recommend The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e56YR. This trailer hitch has a gross towing weight up to 5,000 pounds and has a tongue weight up to 750 pounds. I would check your vehicle's manual to verify what the proper towing capacity is for your vehicle. The hitch has a matte black powder coat finish which is over a protective base coat which offers...
view full answer... - Best Trailer Hitch and Wiring Harness For 2020 Chevy Traverse Towing A Utility TrailerI recommend the Curt Class III Max Frame Receiver Hitch part # CU29FR for the 2020 Chevrolet Traverse because of its concealed cross tube design it provides the best ground clearance compared to the other options. The concealed cross tube design sits up higher since the receiver tube sticks out fascia instead of hanging below the bumper. The receiver tube will be the only portion of the hitch vehicle once it's installed. This hitch also allows you to re-install the panel that hides the...
view full answer...
- Trailer Hitch Receiver and Wiring Harness For a 2022 Chevrolet TraverseYour 2022 Chevrolet Traverse will need the Curt Trailer Hitch Receiver # CU29FR. This is a custom fit receiver with a 2" receiver opening for ball mounts and hitch mounted accessories. I recommend installing the T-One Vehicle Wiring Harness # 118287 when you install the receiver. This will give you a 7-way which you can use with a Curt Echo # C51180 brake controller if you need to tow a trailer with electric brakes. Otherwise you can use an Adapter # PK12716 with smaller trailers requiring...
view full answer... - Recommended Trailer Hitch Receiver for 2019 Chevy Traverse LTThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 is only confirmed to fit models Traverse models to 2017 or 2018 limited models. For your 2019 Chevy Traverse LT, you will want the Curt Trailer Hitch Receiver - 2" # CU29FR which is a fit for 2018 to present models. You will be able to install the cover over the hitch when not in use for that clean look. I've attached a video to assist. If you will be towing with this hitch, I recommend the Tekonsha T-One # 118761 for a 4-way flat...
view full answer... - Curt Trailer Hitch and Towing Parts for 2020 Chevy TraverseThe Curt Trailer Hitch Receiver C13380 was discontinued back in 2020 which is why you aren't able to purchase it. This was replaced with the Curt Trailer Hitch # CU29FR for your 2020 Chevy Traverse which has a better design since the crosstube is hidden. With the crosstube being hidden it gives you better ground clearance plus it looks more clean and it can be completely hidden when you put the bumper cover back in place. If you plan on doing some towing then you'll need a wiring harness,...
view full answer... - Trailer Hitch Receiver and Hopkins Wiring Harness Connector For a 2020 Chevrolet TraverseThe Curt Trailer Hitch Receiver # CU29FR is a great choice for your 2020 Chevrolet Traverse. This 2" class III receiver accepts a large variety of ball mounts, and other hitch mounted accessories. It is rated for 750lbs of tongue weight and 5,000lbs towing. You can use a weight distribution hitch capacity with this hitch, but the capacities do not change. Be sure to verify your specific vehicle capacities with a Chevrolet dealer and use the lower of the 2 ratings that you have. The Hopkins...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Test Fit:
Randy B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Isabelle B
Written by:
Alexander C
Video by:
Zach D
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/15/2023
I have contacted our Customer Service department who can assist you with determining if any parts are missing.