Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.
Features:
Specs:
Setting up these invisible base plates for use with your etrailer tow bar is fast and easy. Just remove the attachment lugs from the ends of your tow bar arms and replace them with these tabs. Then you can just insert the tow bar arms into the base plate receivers to hook up. There's no need to remove the tabs from your tow bar, so you won't run the risk of misplacing tabs. And because the tabs remain on your tow bar at all times instead of protruding from your vehicle , your car maintains a clean look when it's not being towed.
Using the etrailer invisible base plates to attach and remove your tow bar couldn't be easier. With the base plate tabs attached to your tow bar arms, simply insert the tabs into the receivers on your vehicle and twist to lock them in place. Insert the included pull pins to add an extra layer of security, ensuring the tabs stay put. To remove each arm, simply tug the pull pin to disengage the lock, twist the tow bar arm, and pull the tab out of the bracket.
Keep dirt and debris out of the base plate receivers with the included covers. These high-density polyethylene covers easily snap into place over each pull point when your tow bar is not attached. Limiting internal corrosion makes it easier to slide the tabs in and out and helps to prevent seizing so that the tabs don't get stuck.
If you have a tow bar from a different manufacturer, an adapter may be available. etrailer offers adapters for use with other tow bars so that you don't have to go through the added hassle and expense of replacing your tow bar when outfitting your new towed car with base plates.
| Type of Tow Bar | Adapter |
|---|---|
| Roadmaster Nighthawk All-Terrain, Sterling All-Terrain, Blackhawk 2 All-Terrain, and Falcon All-Terrain | e98983 |
| Roadmaster Falcon 2 or Tracker | e99037 |
| Blue Ox (excludes Embassador) | e98986 |
| Demco Kwik-Tow | e98987 |
| Demco Victory Series | No adapter needed |
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your base plates. The technicians at etrailer perform flat tow installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (340 Customer Reviews)
Get a clean, factory look for your car when it's not being towed by using these invisible base plates. Tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. Simple, bolt-on installation with included hardware.These look easy to install. Good instructions sent with base plate.
Very great purchase been using it the past year
Very well taken care of! Vicki is very knowledgeable and helped me get the proper equipment!
The box had holes in it and I was missing some of the hardware, so I’am having to wait on replacement hardware to be shipped. So now instead of waiting 4 or 5 days now I have to wait 8 to 10 days before I can mount it on my vehicle. If those parts make it.
Not my first choice but the Roadmaster was out of stock so after speaking with Alex I decided on the etrailer baseplate for my 2019 Equinox instead of waiting 3 weeks. I am happy that I did. The etrailer baseplate is well built and easy to install. The directions include are vague and at time confusing but the etrailer video was excellent. I was concerned about removing the fascia of the car but following the video made it easy. My only complaint is that I wished the video showed the clips holding the fascia on, see attached photo, once I knew what I was dealing with it made the other side easier to remove.
I was able to mount the base plate according to the Video with a few kinks... The base plate kit had a weld support on the passenger side that was welded wrong and had to be ground down, also the safety cable quick links do not fit in the base plate hole as listed in the video.
Works very well, no complaints. Like all base plates, it is a project to install, but once it's installed, it just works. The etrailer videos on the install process were invaluable in sequencing the work and understanding exactly what had to be removed to get the base plate correctly installed.
the installation went pretty smooth, the complaint I have is the welded bolt plates the nuts weren't aligned properly before welded. I do like it and it does look and fit good.
Trailer invisible base plate was very easy to install even for a 72 year old man great product works as it should
Installed on 2014 Honda CRV to be towed by Class C motorhome. First time towing a car and the base plate worked great for our 2000+ trip. Everyone at at eTrailer is super to work with!
Installed on a 2016 Grand Cherokee. It is definitely an intermediate level DIY requiring extensive disassembly of front grill. The clips that hold the fascia to the front bumpers need some more detail in the otherwise excellent video because it is difficult to figure out which direction to pull/pry without breaking clips.
The towbar was also about 1/8" too narrow for my car's frame and required some jacking and modifying of the hole.
Excellent service on a timely delivery. The box was torn apart but all the parts were inside. I’m sure it didn’t get shipped that way but damaged by the carrier.
This base plate is well made and fit our GMC Canyon perfectly. I pulled the truck over 4000 miles last year and had no problems.
The finished product looks great, it took a lot longer to install than the video but I am happy with the result. The instructions for cutting the holes didn't work well and I had to increase the holes and move them over as they didn't fully line up. I also had to make a relief cut to help the part that the bracket hit. Also make sure you put on the metal plate that holds the plastic shield on prior to putting the bumper on and tightening the tow bar down. Aligning the holes is "fun".... after 4 times taking the bumper off it all worked. Getting the plastic rivets on the underside back on requires the use of many "Special" words.... But it looks great after, and I am looking forward to using it.
Easy to install and works as advertised. Two pieces were missing from the package but the etrailer rep got them sent out expedited the following day and I received them in two days.
Looks great and very sturdy! Assembly was a we bit more difficult that the guy in the video showed it would be... The stud holes in the base plate didn't quite line-up with the holes in the bumper support. About 45 minutes of dremmel and round file remedied that. The package included a mount for a wiring mount, but no mention in the instructions of how to assemble it...
Was in a car accident and this peduct was the only thing that still looked in tact on the front of our jeep, purchased a new jeep and also purchased the same base plate!
Perfect fitment, easy installation.
Looks great!
Took me less than 2hrs complete, hardest part was getting the wire connector for the fog lamps to disconnect.
Installation was a bit involved. The toughest part was dissembling and reassembling the front of the vehicle to complete the installation of the base plate. Also, it was somewhat difficult to complete the connections on some of the blind holes, this was very time consuming and a bit frustrating. Before attempting any connections make sure that you clean the power coating out of the threaded parts. Further, I did have to trim some of the facia around the driver’s side to clear the base plate. I have used this setup to tow over 13k miles and it has been performed without any problems. I am happy with this base plate and I would purchase it again.
Easy to install and looks good. Very functional and easy to use. It is a welcome transition from using a tow dolly.
Very well made and simple instructions live it
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.