To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs on your vehicle's frame.
Features:
Note: Roadmaster direct-connect base plates will only work with Roadmaster tow bars that slide into a trailer hitch, such as the Nighthawk, Sterling, Blackhawk, Blackhawk 2, Falcon, or Falcon 2. These base plates will not work with tow bars that require a hitch ball.
The drawbars, or front arms, on this base plate kit are supremely easy to mount and remove. Just insert them into the brackets and twist to lock them in place. To remove each arm, simply tug the built-in pull pin to disengage the lock, twist the arm back and pull it out of the bracket. Once the drawbars have been removed, the remaining brackets are virtually invisible. On most automobiles, the brackets are mounted within the grille, where they remain not only unseen, but protected from scrapes and scuffs as well.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to take a look at the Roadmaster EZ5 Base Plate kit with the removal arms. This is a custom fit part. It is designed to fit the 2016 and newer Chevrolet Suburban 1500 and Chevrolet Tahoe vehicles. On a custom fit part I always like to recommend for you to go to our web site, use our fit guide. Put in your year and model vehicle and it'll show you if this will work for your application. Now, these EZ5 brackets provide attachment points for your motorhome-mounted tow bar.
It's a nice streamlined designed which gives you a nice, clean look. There's no obtrusive quick disconnect cross bar needed and these brackets are hidden brackets that will sit even further back than your standard brackets. Basically once you remove your drawbar, just like that, these brackets here will be virtually invisible. Now, the drawbars themselves, as you can see, they attach and remove quickly and easily. Just insert them.
You just push it in all the way. It will push on that pin. You twist it and you can hear that pin lock into place and you're all ready to go.To remove them you just pull on the spring loaded pin, rotate it, slide them right out. It's very simple to do. And again, just insert them, push it all the way in, twist it and they lock into place.
They are computer-cut all-steel construction provides exceptional strength. It has a nice, black powder coat finish on all the parts which is very durable and corrosion resistant. It is a simple installation. There's no welding required. These are custom-based plates so they ensure perfect fit on your vehicle.
It includes everything you need. I've got it all laid out here on the table. All the mounting hardware, brackets, even a nice set of detailed instructions and if you look at them they'll give you pictures, very detailed pictures of how to install everything.Now, this is compatible with the Roadmaster motorhome-mounted towbars only like the Sterling, the BlackHawk, BlackHawk 2, Falcon or Falcon 2 that slide into your hitch. These base plates will not work with two bars that require a hitch ball. These parts are all made in the USA. Again just to show you how to remove it, grab your spring-loaded pin here, just rotate it, slide it right out. Then to install it all you have to do is just slide it in, push it and twist it. Simple as that. But that should do it for the review on the Roadmaster EZ5 Base Plate kit with removable arms.
Average Customer Rating: 4.8 out of 5 stars (2057 Customer Reviews)
Designed for use with motor-home-mounted tow bars, the direct-connect brackets are virtually invisible, easy to mount and remove, and they eliminate the need for a quick-disconnect crossbar on your tow bar. Installs on your vehicle's frame.Extremely reliable and durable product.
I bought and self installed this on my 2021 GMC Sierra Duramax 1 year ago. Install took about 5 hours and wasn't difficult...I could problty install it in 2-3 hours after leaening the tricks. Weve towed the truck all over the USA since then (over 10,0000 miles) and it works great! I've used other brands and highly recommend Roadmaster tow systems over the competition.
I reported that one of the removable tow arms was missing to etrailer within hours of receiving the baseplate. This was due to the shipping box being damaged during transit and likely just fell out. After four business days with no communication from etrailer I contacted Roadmaster. A couple of emails and they shipped the part. Very disappointed having to do etrailer's legwork. For this I will give etrailer one star.
The baseplate RM 524473-5 for a 2023 Ford Escape fit as expected sorta. Had to apply a 3 pound hammer as the mounting brackets were tweaked a little likely from welding and pulling a little out of square. I felt the instructions had a lot of reading between the lines, a couple of times I just about picked up the phone and called them to see if my interpretation was correct. But I just consulted with my analytical 15 year old grandson and we figured it out. (His 18 year old brother served to knock me to the floor and pull me back up again, faster than calling a crane service.)
My big complaint was that they could have provided actual measurements where to drill the Tupperware where the arms go through, there is a couple of reverence points that could be used. There was a few minor things that didn't/did need to be done but likely could easily be because of running production changes. (And better packing of 45 pounds of steel by RM)
The tow bars hook up easily to my dinghy car, a 2020 Ford Escape Hybrid. I like that the arms dis-attach easily and can be stored elsewhere. The tow arms attach quickly and easily to the baseplate arms. I do like this system. The installers put it in, so I cannot comment on how easy that was. I know the installers contacted etrailer for their questions, so I was glad to hear that.
The Roadmaster direct connect base was a perfect fit for my 2013 focus S to flat tow. We had it installed in about 3 hrs following the complete direction and pictures. I highly recommend using etrailer.
Good product. If you are reasonably handy and have some tools, you can install this yourself in a few hours. I'm a mechanic, it took me a little over 2 hours to install on my own toad. The fit is good, there are 4 holes you have to drill, otherwise it is plug and play. When you insert and twist lock the tow bar mounts into their sockets they feel a little sloppy but they are secure, and i never noticed any rattle when towing. Overall i give it a 4 out of 5 for easy install and clean look after install. Pic included of installed base plate.
The brackets are heavy and feel solid. The mounting is straightforward on my 2024 GMC Sierra Denali 1500. You will lose the front tow hooks but I feel the tow bracket inserts will be safe to use if needed for a rescue. They are barely noticeable to the casual person when the inserts are removed for daily driving.
Installed on my 2020 Jeep Cherokee for flat towing behind our motorhome . I wanted a tow bar connection that integrated with the front end of the Jeep and the removable arms did the trick . I had one issue with the driver side receiver bracket not lining up with the upper mount bolt hole on the Jeep, image 0547. Had to make a slight adjustment to the receiver bracket so the holes would line up, image 0551 and image 0559. The rest of the install went smoothly
I also installed the Demco braking Stay n Play Duo system , image 0565 which went in without any issues, image 6028. 7 thousand miles of towing later, couldn't be happier with the products
This is a rock solid baseplate. Installed on a 2023 Equinox LT (AWD). I followed etrailer's videos for installation and they are spot on. We connect with a Roadmaster Nighthawk tow bar, charge line kit, smart diode lighting kit, and a Demco Stay-in-Play supplimental braking system. It is fairly well hidden when not in-use. This setup is great!
I installed them on my new RAM 1500. Works great, very heavy duty. I also modified and attached a push bumper and used the Roadmaster base plates.
Exactly what I needed. Written jbstructuons were spot on and video was very helpful.
Installed on my 2020 jeep jl sport s with factory plastic bumper and plastic rock guard. Shane’s video was very helpful but I did not like how the metal plate behind the rock guard was cut away and how the rock guard had two big cut outs so I did some modifications. I cut two slots in the metal bracket and added angle brackets for extra support. As a result i did not use the supplied brackets for the rock guard. I created a template for the rock guard which resulted in two small cut outs. A lot of extra time but i am retired so time is relative. I think it looks great.
Installing on 2020 Jeep Trailhawk :
Pic #0557 : Roadmaster Base Plate Kit , Demco Supplemental Braking System , Diode Wiring Kit , Demco Battery Charge Wire Kit
Pic # 0548 ,0551 , 0559 Had to adjust the bracket plate to line up with the upper bolt holes
Pic #6028 finished install , mounted the operating unit to the top fuse box cover using automotive Velcro . Air cylinder , controller and LED light installed . Aside from the base plate bracket not lining up with the upper bolt holes I would give it 4 stars . My son in law is a master at solving mechanical issues .
I was very pleased with the way you handled my order. I called and was greeted pleasantly and knowledgeable about what I needed and in just a few minutes my order was placed. It arrived just as they said it would in a timely matter.
I would recommend e-trailer to anyone!
Easy install. Looks great. Apparently they have made some changes so that the video is not accurate. Install instructions though were spot on. A template for cutting the grill would be an added plus.
I bought this base plate kit for my 2022 Jeep Rubicon Gladiator so I could flat tow behind my class a motor home with a Roadmaster Falcon all terrain non binding tow bar. The instructions were easy to follow and went smoothly except drilling the holes. That was my fault because I was using a dull drill bit. See attached photo
The base plate arrived on time, with excellent instructions. I went slowly because my truck is only days old and still had it done in an evening.
This kit worked out great for my 2022 Chevy Equinox. I like how it has separate side plates, which make it easier to attach the main bar. The points where it attaches to the frame seem plenty secure. It is important to watch the videos provided by etrailer as Ryan is very thorough and has good tips for installing. I would also recommend installing additional wiring while having the front end off. Overall, I was able to complete in my driveway. The hardest part was sorting out the wiring for whatever braking and tail lights you decide on. William S helped me pick all the necessary components needed for flat towing behind my Jayco RV. I am looking forward to a summer of camping and having more freedom to explore the area, now having a car.
The bracket kit fit my 2023 Subaru Crosstrek perfectly. The instructions are excellent and the video is really useful too. I’m really pleased with this RoadMaster bracket kit and the support from eTrailer.
Item works good. We pulled our ‘21 Canyon behind our RV on several trips and had no issues other than you need to put in a diode to the rear lights to keep them from back feeding.
Easiest I drive done. Works perfectly. I had some concerns if it would work on my Shelby F-150. etrailer put me in touch with Roadmaster directly who had never done one either. Said if it didn’t work I could return it. It fit with minor adjustments. Have towed a few thousand miles already. Couldn’t be happier
Great Company Product arrived on time and the tracking information was above and beyond what I expected Product is exactly as described and of excellent quality
Would highly recommend etrailer and Roadmaster
Everything went pretty good except for the reinstall of the PAD. Had to mount it on an angle because wire to short. Love it versus the crossbar I had on Santa Fe 5 speed. Also had to wire 12v outlet and emergency brake switch wiring into drivers side which was fairly easy. And 12v charging circuit for battery. My grandson Seth made it look easy.
Do you have a question about this Base Plate?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.