Review of CURT Trailer Hitch Ball Mount - Adjustable Ball Mount - C99NR Video

I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to…

I am not sure what products you are referring to but the most safe, secure, and easy tie down method we offer for your Can-Am Spyder is a combination of the Erickson Horizontal E-Track part #EM19147 (3), the Erickson E-Chock Wheel Chocks part…

I do have an option for you but there aren't any custom fit trailer hitch options for a 2006 Thomas School Bus. That said, we do still have universal options which can be installed either via welding or cutting/drilling. For this, I recommend…

Are you sure about the 165/80-13 tire size? I don't show that as a currently available tire size, could you have meant a 185/80-13? In any event, a 175/80-13 tire measures 24 inches tall x 6.9 inches wide which would be slightly shorter at…

I think the part #STL68RB would be perfect for your flatbed truck (looks good by the way). The dimensions of the this oval light are 10 inches long and 3 inches tall. They do stop/turn/tail/reverse light functions as well so you would be totally…

The distance between the mounting holes on the Pollak 7- and 4-Pole Trailer Connector Socket with Mounting Bracket, #HM40975, measures 2 inches to 2-3/4 inches. I have attached a picture to illustrate these measurements. Two, 5/16 inch self tapping…

Typically the Brake Controller Output pin will be the 1 o'clock pin for a trailer side 6-Way connector (see attached picture). This isn't always the case though so you will want to double check before assuming that is the case for using the…

I went to the warehouse and measured the cam and the lock for you part #CAM44333. The diameter of the threaded portion of the lock is 3/4". The length of the cam is 2" the portion of the cam that sticks out from the lock is 1" and the…

10 inches of ground clearance from the bottom of your B and W Tow n Stow to the ground is pretty low. I would highly recommend going with the version of your ball mount with 2-1/2 inches of drop instead with the part #BW44FR which would give you 12…

You'll need a new rail kit for your 2019 Chevy Silverado 1500 but you can use your Reese Kwik Slide 15k hitch that you already have still. You'll need the rail kit part #RP56015-53 which is an outboard style rail kit for your truck. The rails…

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…

There is a way for you to add a trailer hitch to your 2002 Thomas Saf-T-Liner bus although there are none mounted vertically onto the frame, they will use brackets to mount to the frame which can be bolted or welded on. What you need is the Draw-Tite…