Hopkins Backup Sensor System - Audible Alert - License Bracket Mount
(70 reviews)
Price: $71.47
In Stock
Hopkins Backup Sensor System - Audible Alert - License Bracket Mount
Item # HM60100VA
Retail:$89.00
Our Price: $71.47
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (70)
- Q & A (0)
- Photos
Hopkins Backup Camera - HM60100VA
- Alerts and Sensors
- Hardwired
- Hopkins
Mounted behind the rear license plate, the NVision Back-up Sensor System detects objects up to 5-1/2 feet away and alerts you with an audible alarm.
Features:
- Detects objects, and starts to beep, up to 5-1/2 away
- Left and right sensors
- Audible warning alarm beeps more frequently as objects enter each of 3 alert zones
- Mounts behind license plate
- Cable length: 8'
- Draws 620 milliamps
Specs:
- Includes:
- Mounting bracket with 2 sensors
- Audible alarm
- Installation cables
- 3-Year warranty
Protect your vehicle from rear-end collisions, eliminate blind spots, and increase visibility. A recent phenomenon is an increase in non-traffic incidents involving children, with backovers accounting for 44 percent of fatalities attributable to the larger size of today's vehicles, which have bigger blind spots. Mounted behind the rear license plate, the NVision Back-up Sensor System detects objects up to 5-1/2 feet away with three alert zones.
60100VA Hopkins NVision Backup-sensor System
California residents: click here
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Product did not meet expectations
- Too difficult to install
- Did not fit
Customer Reviews
Hopkins Backup Sensor System - Audible Alert - License Bracket Mount - HM60100VA
Average Customer Rating: 4.5 out of 5 stars (70 Customer Reviews)
Mounted behind the rear license plate, the NVision Back-up Sensor System detects objects up to 5-1/2 feet away and alerts you with an audible alarm.by: Bill Pazul02/22/2024
Well! It's with great coincidence that it stop working last week. Worked fine and now has stopped! This is our second one which lasted 8 years...traded with car!
I now have to remove the back of our 2022 Chevy Trax to see what's going on!
by: Guy A.11/25/2017
Installed on 2015 Kia Sorento. My particular installation was simple . I new it would be , that is why I chose this product. My backup lights are located on the back door hatch. Removed three small opening covers and exposed the opening to the light wiring and gained access to " fish wire and connector through, without removing paneling. Connections were literally a "snap". All was achieved within the back door panel. The unit seems to work fine but is lacking corner activation, which is to be expected with only two sensors. My particular application will not sense a small dog even when sensors are pitched lowest possible.( high licence plate). Had to disconnect and reconnect connector with white alignment dots numerous times before unit worked properly. Overall, I would say it functions very well . It is very adequate for my needs and at a reasonable price. I Couldn't give it 5 stars because of the connector problem. How it does in the future. only time will tell .
Guy A.
11/25/2018
It it not perfect because it is limited to certajn degree. It would work better if my placement would have allowed for it to be a little bit lower. I am still very happy with the purchase and would definately recommend it. It is still a great help to me.
by: Jay H.06/24/2011
First of all etrailer is great; prompt shipping and immediate e-mail notifications throughout the purchase process. The unit was easy to install once we figured out the backup light color code for my 2011 Dodge Challenger (white w/light green stripe). It works great! Almost invisable; does not detract from the looks of the vehicle.
Felicia C.
10/15/2013
I purchased this backup sensor to install on my sons 2010 Dodge Challenger SE. We havent installed it yet. How has the unit worked for you? Any problems and any additional info you could offer on the install?Thank you, Felicia
by: William02/12/2024
product works and on most days is great but when in rain or heavy dew it gets set off all the time.
by: Dreau06/09/2023
Product works well. After installation, followed directions to make adjustments as needed. Backed up towards a fence and alarm went off. Repeat 3 more times and then walked off footage between. Sensors read at least 6'.
by: Kendall 06/20/2023
I really like the audible alert license bracket mount. Good price and works great. Easy to install.
by: Lawrence 05/14/2023
Great product. Easy installation. Excellent instructions and good price. I've used e-Trailer's products before and enjoy their simple but important application````protecting things behind you while you're backing up.
by: James 11/16/2023
My wife loves this addition to her car.
by: Ken L08/03/2019
I'm a car guy for over 40 years, with a long history of show Corvettes. So I'm very particular and I do all of my own work. I bought this backup alert frame from etrailer.com late last year and installed it on my wife's 2011 Ford Fusion along with a backup camera on top of the license plate. It all fit together perfectly. And it works beautifully, just as a factory backup alert would. I just bought a second one for my 2015 Malibu LTZ that has a factory backup camera, but no alert! So this is the quick and easy fix, without drilling holes in the rear valance for those other types of sensors.
Feeding the wire up through the license plate lamp is easy, then just tapping it into either backup lamp wire. And a ground is easy to find. I ran the alert speaker wire around the back seat and laid the small speaker up on the corner of the rear shelf. Depending on the height of license plate bracket, the sensors are adjustable up and down also for accuracy. After my wife backed into two neighbors cars at two different homes we've lived at, this solution was long overdue!!!
Kenl
8/4/2020
Still works fine. Sometimes alerts briefly when backing up for no reason. But its not an issue.
by: John N.03/20/2020
Had to modify the bottom plastic area to fit between my bumper and tailgate. Shaved off about 1/8" - 3/16". Installation not too bad. Would like to see a larger notification area, about 8 to 10 ft for a slow intermittent beep. Right now it is between 5 to 6 ft. Also, I have had times I get a low steady sound when I put in reverse with nothing behind me. Goes away when I put in forward. When I do get a low steady sound, the until still notifies me when I get close to an object. I disconnect the horn when I tow my boat or ATV trailer. A good safety kit for the price and have recommended it to friends.
John N.
3/28/2021
After a small modification to installation, your product has worked well. Sometimes get a low sound when I do an automatic unlock or lock by my key fob but it is intermittent. Still recommend the product.
by: Mark A12/05/2019
Installing the back up alarm was easy , directions were very clear . The alarm works great loud , clear, and very reliable. Does exactly as advertised. All good hear
Mark A.
12/6/2020
Works great still. Im sure it saved me from damaging my car a few times. No complaints , works evey time
by: Fred B09/26/2017
The original backup sensor was defective but was replace very soon by Hopkins once notified. The replacement has been working well for over a year and is sensitive and has good range. I am extremely pleased with it.
Frederick B.
9/26/2018
It is working very well. Money well spent!
by: James03/29/2018
I’ve had this back up camera and alarm system which has worked great , I especially like the sensor system with the audible beep , set up an installation are relatively easy and instructions are very good ,only one hiccup the sensor stopped working after a few months. I contacted e trailer and their customer service was fantastic extremely helpful and sent me out a brand new unit No questions asked and it has worked flawless ever since !! If you’re looking for an economical way to have a back up camera and back up sensors this is definitely the way to go. Thanks again to E trailer for the fantastic customer service
by: Larry05/07/2018
I have purchased four backup camera systems over the last three years or so. Only one time has a system malfunctioned. Customer service took care of the issue immediately and without need for explanation. As long as I can purchase these systems manufactured by Hopkins and sold by etrailer.com, I will continue to purchase them as needed. They hold up great. I’ve had one system for over two years. Never had an issue with it. Way better than the cheap ones. These backup camera systems are priced very reasonably on etrailer. Each system I’ve purchased is installed on a separate vehicle (total of four). Easy to install as well.
by: Raymond03/07/2018
Product is useful. I bought it to help get the distance when backing up to a smaller car with my SUV. It works pretty well for that purpose. Occasionally I get false alarms when backing up with nothing close to my vehicle. All and all it served my purpose.
Heather A.
3/7/2018
Raymond,Thank you for your review.This back up system has sensors that are made to be able to adjust the angle. The mounting location of the sensors may be an issue. If the sensors are detecting parts of the vehicle then you may be getting false alarm beeps. This may be happening if the angle of the sensors are detecting the sides of the mounting location or the angle of the sensors are detecting the bumper. It is possible to mount the unit upside down so the sensors are on the bottom but that will block some of the range of the sensors.
by: Larry B.08/27/2016
Dear Customer Service,
The rating section would not accept a mark, but I place the product as excellent. It was easy to install as the instructions are straight forward, and I have now installed the Hopkins system on two of my Ford F-150s. I have a factory unit on my latest Ford F150, which had a camera only. I missed the sensor system, and I had to install it on my 2015 F150. The Hopkins Backup Camera and Sensor system is comparable to the factory system, but a lot less expensive. I would not be without it on any of my vehicles. Thanks etrailer for your support and excellent service.
Larry B.
by: Pete K01/15/2017
Package arrived in good condition. The product is well constructed. Delivery from etrailer was great. Will not have time to install product until spring here in the NE. Will follow up later.
Pete K.
1/15/2018
Still working great. Saved me a number of times from almost hitting something. Very accurate.
by: Ron A.07/07/2017
Extremely fast delivery. Simple installation on my 2005 Nissan Altima. I like the
product because it eliminates drilling holes in the bumper. I found the audible
alarm cable to be about 6' shorter than I needed. I easily spliced in a cable extension.
Product worked well. Well worth the price.
Hopkins S.
7/10/2017
Roy, Hopkins appreciates your business and is grateful you purchased our Backup Sensor System. If you have any concerns or questions, please get in contact with etrailer customer service.
by: rk01/24/2015
Directions somewhat vague.Wires to backup lights would not be long enough for some installations. Were fine for my Dodge Durango.
Scott H.
1/26/2015
rk, sorry that you werent completely satisfied with the directions. We have taken note and will improve them going forward. As always, feel free to contact our Technical Support Line with any questions. 800-835-0129Thanks! Hopkins Mfg. Team
Rachael H.
1/27/2015
by: Don05/03/2019
I installed this product in a 2017 Camry, which has a backup camera but no proximity sensor. I just finished the installation and haven't fully tested. I mounted the alarm in the trunk lid to minimize wiring; set it on Hi. If it is not loud enough I may need to move it further forward. I found the incandescent backup lights in the trunk lid and wired the power leads into them. One problem I had was connections in the splices. Per the note in the instructions, I doubled the lead wires in the connector, and now everything works.
by: Simon12/21/2017
Needed a parking sensor for the front of my 2017 Ford F250 FX4. It is hard to judge the distance from a vehicle in front when parking. I did not want to drill any holes in the bumper. This is the perfect solution. Sensors and controller simply bolt to the front license plate holder, picked up power from one of my upfitter switches under hood and ran speaker wire through the firewall grommet. I mounted the speaker under the driver-side dash. So far the system is working great.
by: James12/17/2017
I had purchased front parking sensors for my 2018 Mercedes Benz 300 GLC (why in the world on this car, no front parking sensors) and it cost me $265 to have them installed. I found the HOPKINS backup sensors on [another site] and because of shipping (so I could return if needed) I purchased it, even though more expensive for my 2018 Honda Ridgeline for the front (the rear had sensors installed). My local auto shop charged me $50 for installation. Total...a little over $90. ABSOLUTELY PERFECT. I have since bought another set from etrailers for the front of my 2014 Nissan 370Z. It is so low to the ground that I installed a wireless camera from GARMIN on the front license bracket. Because the HOPKINS worked so well on my Ridgeline, this seemed like a great solution for when I do not take the time to hook up the Garmin GPS in my vehicle. BIG difference in price of sensors.
Bottom line...Buy it, you will really like it....
by: Mike E06/01/2020
This was a great add on for our VW Beetle. It works great and gives us confidence when parallel parking. The folks at etrailer were helpful and great to work with.
Mike E.
6/1/2021
Works great, glad we have it
by: Al M.03/08/2012
I received the Hopkins Backup Sensor System HM60100VA within 4 days. That was very fast. I installed the Backup sensor on my front license plate, because I have factory installed rear sensors. I am going to install a switch so that I can turn it off when I don't need it. When the sensor is mounted in the front it is very sensitive, it beeps a lot. I will only use it when I park.
by: David06/23/2018
Works great! I installed it on my 2014 Ram truck. Only suggestion is to add a toggle switch to turn it off so it doesn’t drive you crazy when backing a trailer! Easy addition. Important to remember to turn it back ON after so it will warn you again.
25
70
Show More Reviews
See what our Experts say about this Hopkins Backup Camera
- Will the Hopkins Backup Sensor System # HM60100VA Work on a 2008 Chrysler 300You should have no problem using the Hopkins Backup Sensor System, # HM60100VA, on your 2008 Chrysler 300. We have not received any reports of problems with Chrysler vehicles and I spoke with my technical contact at Hopkins who said they have installed this system on many Chrysler vehicles without any issues. A coworker of mine also had a similar Hopkins backup camera system installed on his Chrysler PT Cruiser and has not had any problems. There is always a chance for something to go...
view full answer... - Is the Hopkins Backup Sensor System, part # HM60100VA, WaterproofI spoke with my contact at Hopkins and he informed me that yes, the Hopkins Backup Sensor System - Audible Alert - License Bracket Mount, part # HM60100VA, is waterproof and should not encounter any problems from the weather or from washing your car. This product also has a 3 year warranty, and if you were to encounter any problems from water damage they would take care of it for you.
view full answer... - Will Hopkins Backup Sensor System Fit if License Plate is On Trunk and Not BumperThe pictures of the Hopkins Backup Sensor System # HM60100VA we currently have on our site are just sample pictures on different vehicles. It actually doesn't matter if your license plate is on your trunk or on the bumper, this system will work either way! In fact, I am attaching a sample installation video of this on a 2010 VW Jetta where the license plate is located on the trunk like what you mentioned.
view full answer... - Installing Hopkins Backup Sensor System On 2013 BMW 328XiThe installation of the Hopkins Backup Sensor System, part # HM60100VA is the similar for your 2013 BMW 328Xi as it is for other vehicles. When installing you will need to locate the reverse light circuit wire that is showing current when the vehicle is put in reverse. These wires can be found at the back of the tail light. You will need to use the included connectors to attach to the reverse circuit wire and also to the ground. To make sure you locate the correct wire I recommend using...
view full answer... - Can The Hopkins Backup Sensor System Be Wired To Factory Tow Package on 2023 Ford Maverick? While I do not see any reason connecting the Hopkins Backup Sensor System # HM60100VA to the factory tow package wiring on your 2023 Ford Maverick would not work, this is something you will want to test first. You can see the power and ground terminals on the 7-way connector in the image below. This will allow you to connect to the terminals in the connector to test the connection and ensure it will not confuse your Maverick into thinking a trailer is connected.
view full answer...
- Will the Hopkins Backup Alert System Fit a 1998 Lexus LS400The Hopkins backup alert # HM60100VA is a universal fit type of item. The mounting holes on it are the standard measurements for license plates on vehicles. The overall length is 13-1/8 inches and the overall height is 5-15/16 inches. The alert will only beep when something gets within range of the sensors. It will start beeping if an object is detected starting at 5-1/2 feet away.
view full answer... - Is the Hopkins Backup Sensor System Part # HM60100VA Easy to Install Yes, the Hopkins Backup Sensor System part # HM60100VA can be installed on your 2011 Acura TSX but the term easily will be relative to your experience and I cannot speak on that. It will be easy for some and hard for others which all depends on your experience. Unfortunately, we have not yet installed this unit on a Acura TSX so I would not have step by step instructions but if you take a look at the install video on a similar vehicle, you can get a better idea of what all is needed.
view full answer... - Can the Hopkins Backup Sensor System with Audible Alert Be Used on a Motorhome?The Hopkins Backup Sensor System - Audible Alert - License Bracket Mount # HM60100VA will allow you to add sensors to your 37 foot motorhome to help with parking clearances. You can add the Extension Cable for Hopkins Backup Sensor System - 5' Long # HM3100504060 to give you the ability to better hear the zone alerts. You can use multiple extensions if needed.
view full answer... - Can Hopekins Backup Sensor System HM60100VA Fit 2020 Honda RidgelineYes the Hopkins Hopkins Backup Sensor System # HM60100VA that you referenced can fit your 2020 Honda Ridgeline RTL as it's a universal sensor system. While we don't have an install video for this on a Ridgeline like yours I did attach a link to a page that shows it install on a similar vehicle.
view full answer... - Will the Hopkins Backup Sensor System # HM60100VA fit a 2012 Mini Cooper SThe Hopkins Backup Sensor System # HM60100VA that you referenced is designed to fit any vehicle with standard size license plates. Based on that it should work very well for your 2012 Mini Cooper S. But if you wanted to be sure you could check out the picture I attached that shows the dimensions of the # HM60100VA and compare that to the are where your license plate is to see if it would fit. This bracket is 13-1/8 inches wide by 5-15/16 inches tall.
view full answer...
- Should the Hopkins Backup Sensor System # HM60100VA Beep When Shifted into ReverseThe Back Up sensor is designed to start beeping when you are approximately 5-1/2 feet away from an obstacle. If it beeps when you put the vehicle in reverse it must be sensing something as when we have tested this unit and it was properly installed it would only start beeping once it started sensing things behind the vehicle. You might try adjusting the angle of the sensors till you find a setting that allows the sensor to work properly.
view full answer... - Does the Hopkins Backup Sensor System Part # HM60100VA Require DrillingNo, the Hopkins Backup Sensor System part # HM60100VA will not require drilling. It uses the pre-drilled holes in your 2017 Hyundai Fe's rear bumper where the license plate attaches. The backup system has a 3 year warranty and comes with everything needed for installation. I also recommend using the 22-18 Gauge Butt Connectors part # 05730-5 to make the needed connections instead of the quick splice connectors included in the kit as this will provide you with a water tight sealed connection....
view full answer... - How Would the Hopkins Backup Sensor Install on a Toyota Sienna 2012To install this Hopkins Backup Sensor System # HM60100VA on your 2012 Toyota Sienna you will need to locate the reverse light circuit. The wires that go to your reverse lamps will be the ones to use. You will need to use a circuit tester like our part # 40376 to determine which wire has voltage when your 2012 Toyota Sienna is put into reverse. Once you find the correct wire you will need to use the included quick-connect connectors to tap into this circuit. This will tell the sensors when...
view full answer... - Can the Hopkins Backup Sensor System part # HM60100VA Be Installed on Lower License PlatesThe sensors of the Hopkins Backup Sensor System part # HM60100VA that you referenced are adjustable so that you can accommodate for varying height license plate brackets. The included 8 foot cable should work well for you. I attached an install video for you to check out as well.
view full answer... - Will Hopkins Backup Sensor System Work With 2020 Chevy Silverado 1500The distance of 5-1/2 feet is measured from the sensors on the Hopkins # HM60100VA. If installing this on your 2020 Silverado means you have a few inches between where the sensors are located and the edge of your bumper then you would need to account for that when backing up. As with any vehicle proximity sensors, there is going to be a bit of a buffer with the warnings so I don't think you will have a problem. Following the installation, I would stick a box or something similar behind...
view full answer... - Routing Wire from License Plate Bracket Inside Vehicle to Install Hopkins HM60100VATo get the wire from the license plate bracket through the lift gate of your 2014 Chevy Equinox you can look for a hole possibly on the underside of the lift gate handle area, or most likely you will have to drill a hole to route the wire. If you can I would recommend you drill through a plastic area possibly around a light fixture or the handle instead of through the painted portion. Drilling through a painted portion wouldn't be that big of a deal, but anytime you can minimize modifying...
view full answer... - CameraThanks for the kind words, but unfortunately we do not have anything for the front of the vehicle.
view full answer... - What is the Field of View for the Hopkins Backup Sensor System Part # HM60100VAThe sensors on the Hopkins Backup Sensor System part # HM60100VA have a viewing angle of 110 degrees. The sensors can detect objects up to 5.5' away. There are three ranges of detection: red 0-1.5', yellow 1.5'-3.5', and green 3.5'-5.5'. If you need both the monitor and camera, you will want to use the Hopkins Rear View Camera with Backup Sensors part # HM60195VA. Part # HM60100VA is only for the rearview camera and sensors.
view full answer... - Backup Sensor System Compatibility on the Front Bumper of the VehicleThe Hopkins Backup Sensor System - Audible Alert - License Bracket Mount # HM60100VA can absolutely be used on the front bumper. You will simply need to connect the power wire of the unit to your running light circuit or 12V power on a toggle switch instead of the reverse light function like you would on the back of your vehicle. This will give you the sensor functions anytime the running lights of your vehicle are turned on. Another option is to add a toggle switch and run the power...
view full answer... - Will Hopkins Backup Sensor System Work With Metal License PlatesYes, the Hopkins Backup Sensor System - Audible Alert - License Bracket Mount # HM60100VA will work with metal license plates.
view full answer... - Installation of Hopkins License Plate Mounted Backup Camera or Sensor SystemThe Hopkins Backup Sensor System - Audible Alert # HM60100VA or the Smart Hitch camera with sensors # HM60195VA uses a wire that can be run either under the bumper or through it. I recommend drilling a hole just big enough for the connector on the wire through the bumper so you can have a clean look. You will then run the wire through a rubber grommet seal to access your wiring or along a trim panel to get to the wiring location without pinching or crimping the wires.
view full answer... - Can Hopkins Backup Sensor System # HM60100VA Install on 2013 BMW X3The universal nature of the Hopkins Backup Sensor System # HM60100VA allows it to install any vehicle that has standard taillight wiring. To install it you will need to locate the reverse light circuit. The wires that go to your reverse lamps will be the ones to use. You will need to use a circuit tester like our part # PTW2993 to determine which wire has voltage when your 2012 Toyota Sienna is put into reverse. Once you find the correct wire you will need to use the included quick-connect...
view full answer... - Installing Hopkins Backup Sensor System # HM60100VA on 2011 Toyota AvalonI looked at some photos of the 2011 Avalon, and it appears that the reverse lights are located on the trunk lid, along with the license plate where the sensors attach. This will make the installation easier. First, find a location in the passenger cab to locate the audible alarm. The package shelf behind the rear seats would be a good spot. Route the wire into the trunk area. The wire will follow the hinge (in such a way so that it does not get pinched) and route along the underside of...
view full answer... - Hopkins Backup Sensor System Sounds Constant Alert when Installed on a 2008 Nissan PathfinderIf the license plate area on the 2008 Nissan Pathfinder is recessed, the sensors could be picking up the overhang above the license plate area, or the rear bumper. You would need to put something behind the unit so that it protrudes further from the rear of the vehicle so the sensors will not detect those items on the vehicle. If there is a short circuit that is applying constant power to the alert, it would just beep continuously while in reverse because there would be power applied to...
view full answer...
Do you have a question about this Backup Camera?
Info for this part was:
Test Fit:
Joe V
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
David F
Video Edited:
Jacob T
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C
Installed by:
Kathleen M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
2/28/2024
What's the verdict? Did you find out what the problem was? There is a 3 year warranty on the backup sensors, so let me know what you find and we can go from there.