Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4

See what our Experts say about this Rhino Rack Accessories and Parts

• Quick Mount Nuts for Rhino Roof Rack Tracks
  According to Rhino-Rack, their M8 x 16.5 # RR72XB T-bolts are meant to fit in the top channel of their crossbars. For the tracks, you'd want to use # RRQMFK11 which are compatible with the Rhino-Rack roof tracks. The Rhino Rack # RLTF leg kit would include the necessary hardware to attach the leg to the tracks. If you could reply and tell me how long of a crossbar you needed, I'd be happy to make a recommendation.
  view full answer...
• Replacement Channel Nuts For Rhino-Rack RTC Roof Rack Tracks
  Based on the part number you gave me, it looks like you are needing Quick Mount Nuts for Rhino-Rack RTL600 Legs - Factory Tracks - Qty 4 # RRQMFK11. These are made to fit the Rhino-Rack RTL600 Legs into Rhino-Rack roof tracks such as the Rhino-Rack RTC-Style Roof Rack Tracks # RTC14 that you were looking at.
  view full answer...
• How to Install the Batwing and Foxwing Awning Relocation Kit
  Here are the 2 different mounting options for installing the Batwing and Foxwing Awning Relocation Kit # RR31102. You can change the orientation of the brackets so that the awning will either hang higher or lower depending on your application.
  view full answer...
  
• Correct Rhino-Rack Roof Rack Channel Nuts for Trailer with Rhino-Rack Factory Roof Tracks Installed
  I spoke with Rhino-Rack and was able to confirm that both the part # RRQMFK11 (30mmx25mmx5mm) and N057-BP (24mmx21mmx4mm) are compatible with the Rhino Rack Factory Roof Tracks. If you're looking to mount a set of crossbars to these tracks, you'll need a few items which I have attached for you below. Rhino-Rack Quick Mount Legs part # RRRLT600 (Comes With RRQMFK11) Rhino-Rack Vortex Aero Crossbars part # RRVA180B-2 If you need a different size crossbar, you can choose this from the list...
  view full answer...
• Can Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms Fit Retrax XR Rails
  The Antenna Mounting Bracket for Rhino-Rack Crossbars and Platforms # RR43196 have 2 different T-Bolt plates that can be used. The longer one is too long but the shorter ones measure about 1-3/8" long x 5/8" wide. Width-wise the plates will fit but they might be thicker than what the Retrax XR rail is compatible with so in that case you can use the Quick Mount Nuts # RRQMFK11 which are compatible with the M6 bolts that come with the antenna mounting kit.
  view full answer...
• What are Dimensions of Replacement M8 x 16.5 mm Stainless Steel Rectangular T-Bolt
  The rectangular bolt head of RR72XB is 1 13/16" long x 7/8" tall x 1/8" thick. The type of track nuts that would fit into the # RTS507 would be the part # RRQMFK11 though. The # RR72XB is for fitting into the top channel of the crossbars.
  view full answer...
• Parts Included with Rhino-Rack Y02-490B-NT
  The main difference between the Rhino-Rack # Y02-490B-NT and the JA9943 is the # Y02-490B-NT provides 59 inch crossbars, the # RRRLT600 feet and the track fit kit for Thule ( # RRT-FK1) and Yakima ( # RRT-FK3) style tracks. The JA9943 provides 54 inch crossbars, the same feet and the track fit kit for factory tracks. If you were wanting the JA9943, you could order the parts separately: • Rhino-Rack 54 inch Vortex Aero Cossbars, part # RRVA137B-2 • Quick Mount Roof Rack Leg # RRRLT600 •...
  view full answer...

Do you have a question about this Accessories and Part?