Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan
(171 reviews)
Price: $166.94
In Stock
Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan
Item # MA10A21275K
Our Price: $166.94
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (171)
- Q & A (0)
- Videos (1)
- Photos
MAXXAIR Accessories and Parts - MA10A21275K
- RV Vents and Fans
- Roof Vent
- Circuit Board
- MAXXAIR
Replaces the printed circuit board for your MaxxFan RV roof vent with powered lift and reversible fan. Works with both aftermarket and OEM models of MaxxFan Plus and MaxxFan Deluxe manufactured after 2010.
Features:
- Replaces the printed circuit board for your MaxxFan RV roof vent with powered lift and reversible fan
- Works with both aftermarket and OEM models:
- MaxxFan Plus: 00-04500K, 00-04700K, 00-04800K, and 00-04900K
- MaxxFan Deluxe: 00-07000K, 00-07500K, 00-08500K, 00-08700K, and 00-08900K
- Fan must be manufactured after 2010 for circuit board to fit
10C21275K Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents - Reversible fan
Replaces 10A21275K and 10B21275K
Video of Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Maxxair RV Vents and Fans - Enclosed Trailer Parts - MA10A21275K
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the replacement printed circuit boards for your max air powered lift RV roof vents. As you can see, we've got two different boards here. These are the part numbers that you see on the screen there. Essentially, these are exactly the same thing with one small difference between them.
If you look at the circuit board, you can see they have almost all of the same components except this large black box here. This is actually going to allow you to work. Allows this board to work for your max air vents that are both exhaust and intake. So this other one that does not have that box is only going to work with your max air fans that are exhaust only. If your unit is able to bring air in as well as exhaust it out, you're going to need this one over here.If your unit is only capable of exhausting the air from inside your RV, this is the unit that you will need here.
Keep those part numbers up there for you to make sure that you are getting the right one. It's a pretty slight difference between them, but obviously it's going to have a big impact on their usability. We want to make sure that you're getting the product that you need, so just wanting to clear that up for you. Both of them are going to work with your max air power. It's just that functionality difference that you need to look out for.
We're going to make sure that you knew the difference and are going to get the right chip that is going to work for you. That is going to complete our look at the max air replacement printed circuit board. Again, I'm Michael with etrailer.com. Thanks for watching.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan - MA10A21275K
Average Customer Rating: 4.5 out of 5 stars (171 Customer Reviews)
Replaces the printed circuit board for your MaxxFan RV roof vent with powered lift and reversible fan. Works with both aftermarket and OEM models of MaxxFan Plus and MaxxFan Deluxe manufactured after 2010.by: Lex02/04/2024
Product is as advertised. Only concern is that one of the components (yellow square piece, see photo) on the control board looks to be bent over as a result of the shipping process in soft materials. I have straightened it out by hand and am hoping everything works once installed. Otherwise clear communication and great customer service.
by: Mike05/10/2024
etrailer was exceptional as always with their quick ship. Got the board installed and fan is working again. After a lot of research I also installed a voltage regulator so hopefully this new board doesn't get fried again when we use our solar. Maxxair should be ashamed of themselves for selling fans that were not designed to handle the higher voltages of solar considering most RVs come with solar prep. A suggestion to etrailer would be to put some type of warning on your page for these Maxxair fans about this known issue and also offer a 12V regulator like the DROK DC-DC Stabilizer, 9V-36V to 12V regulator to install with these fans. A $17 regulator to protect a $160 board & $120 motor; a no brainer to me.
by: Erik02/04/2024
I think I got scammed from Amazon. I purchased 2 max fans & held them until my roof on my rv was done. Now the warranty is up one fan works and the other did the green light death thing. Brand new and it doesn’t work. This replacement works very well a bit high priced but what can I do with a 350 fan with a bad controller. It was shipped very fast and works perfectly. The manufacturer should be giving discounts to offset the price of repairs. Thank you for having the part and fast shipping.
by: Joseph 04/20/2024
After I finally got it in it worked as it should. The hardest part was getting it in with all the wires in a small area. Lots of fitting then moving then fitting again. Then success.
by: Brian 03/13/2024
Easy install, fixed my fan in kitchen and have had no issues since. Super happy with.
by: Charles 02/10/2024
After we figured out what the problem with our MaxxFan was, we ordered the part and it arrived soon after ordering. We installed the new circuit board and that cleared up our problem.
by: Thomas04/07/2024
The replacement part solved my issue. What else can I say. It was an easy install.
by: Bob 11/16/2023
Etrailer service was 5 star. MaxxAir part worked but didn’t fix the problem of the fan beeping & shutting off. Decided to bypass the board and wired a reverse polarity variable speed switch directly to the fan. Works fine now. I just lost the automatic lid closure function, which is no big deal.
by: Campbell02/12/2024
I purchased from e trailer but had to go the manufacturer for replacement of faulty unit. If there is next time I will go direct to them.
by: Justin02/10/2024
basically would not talk to me to have this item returned, wasted nearly $[XX] !! ive bought from etrailer several times, wont be back
by: Anthony 11/22/2023
I have ordered multiple items from etrailer in the past and have always been satisfied with their product quality and fast shipping. I highly recommend etrailer.
by: Charles 01/12/2024
The part was delivered quickly in good shape. I followed youtube videos to install it and its working fine for the last year.
by: G&G02/06/2024
Works. Circuit board did not look the same as the original, but still worked as advertised.
Unhappy about the price!
by: Miles 02/09/2024
Worked like a charm. Direct replacement.
by: Tom 05/08/2024
Called customer service, gave them the model number, they gave me the part number and price, and they shipped it within a hour and a half. They even emailed me when it was delivered. Who can ask for more. Best experience I’ve ever had.
by: Stewart08/31/2023
I would have given 5 stars but the circuit board had some damage to it and was doubtful it would work but it worked just fine.
by: Phillip 05/13/2024
Very timely delivery of a hard to find part.
by: Cal 05/18/2024
Took 10 min to install and works great!
by: Kevin 04/20/2024
Great job Madison the past arrived way before I thought it would an works great
by: Joseph 03/20/2024
Thanks for the prompt shipping and excellent customer service! Will use again!
by: Wade 02/07/2024
Prompt service, good price, and easy and thorough support materials. Would recommend and would use this company again.
by: Robert02/07/2024
Should highlight must have constant 12
Volt,or will beep,beep,beep.
by: Matthew 07/20/2023
This was a great solution for the “green light of death” on our MaxxAir Fan. It was easy to install and worked immediately. The order arrived safely and on time. The price was good value.
by: John 03/29/2024
Just what I needed!
by: Frank 02/07/2024
Parts worked perfectly and was easy to install.
25
171
Show More Reviews
See what our Experts say about this MAXXAIR Accessories and Parts
- Replacement Circuit Board For MaxxFan Plus Reversible Power Lift RV Roof VentCan you tell me exactly which model MaxxFan Plus you have? The # MA10A21275K replacement circuit board is the proper replacement for the following fan units: MaxxFan Plus: 00-04500K ( # MA00-04500K), 00-04700K, 00-04800K, and 00-04900K ( # MA99FR). If your fan is one of the above, the # MA10A21275K is what you're looking for. If you have a different fan, let me know which specific model you have and I'd be happy to check the availability of a replacement circuit board. If you remove...
view full answer...
- Replacement For MaxxFan 4500K That no Longer StartsSince your MaxxFan 4500k has buttons that are no longer working properly, and also has an issue with the motor, you will need a replacement: - MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K It is possible that the Replacement Printed Circuit Board # MA10A21275K with Replacement 12-Volt Variable Speed Fan Motor # MA10-20968 can remedy the issue, but there's no guarantee of that and the cost of these parts is going to be nearing a replacement, so the best thing...
view full answer... - Replacement Handle for Valterra RV Waste Valve and Circuit Board for MaxxFan 7500KFor a replacement Valterra valve handle the part # T1003-6MNVP would be what you'd want. This is threaded like you would need. It is likely that the circuit board is out in your MaxxFan 7500K and you'd need the part # MA10A21275K. You should also check the condition of your RV battery though.
view full answer... - Troubleshooting A MaxxFan Deluxe Vent That Isn't Responding To Buttons Or Remote ControlIt sounds like either the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K has a faulty control board, has been wired incorrectly, or isn't receiving 12 volts to properly function. I recommend first checking the wiring with a digital multimeter # PT89ZR and ensure that you didn't accidently get the wires crossed when splicing them together with the wiring from your RV. The white wire from the vent is your ground and the black wire is your power. If your wiring is correct and you're...
view full answer... - Replacement Circuit Board for Maxxfan 5100k RV Roof VentThe correct replacement circuit board for a MaxxAir Vent Fan 5100K is the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents part # MA10A21276K.
view full answer... - Replacement Circuit Board for MaxxAir Printed Manual Lift RV Roof Vent with 10B21276KZ BoardUnfortunately, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K you ordered would not be the correct circuit board. The correct circuit board is the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents # MA10A21276K.
view full answer...
- Troubleshooting A MaxxAir MaxxFan That Keeps Turning OffYour MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-04000K could be cutting off after 10 seconds for the following reasons: 1. Insufficient or fluctuating power. Your fan could be receiving less than 12v of power. Check the power wire at the unit using a multimeter like # PT89ZR. If you aren't receiving 12v then you could have a voltage drop off due to the length of the wire running from the battery to the fan and would just need to increase the...
view full answer... - Replacement Circuit Board for MaxxFan 7000k RV FanYou definitely have a circuit board issue with your MaxxFan 7000K and need to replace it with the part # MA10A21275K and you'd be set.
view full answer... - Replacement Circuit Board For 4900K To Operate off a Remote and KeypadThe keypad 11-0001K which fits your 4900K fan appears to be obsolete. So using Remote # MA00A01150K with a new Circuit Board # MA10A21275K appears to be the only option for your 4900K fan. Unless you are able to find the correct keypad in good condition.
view full answer... - Replacement Circuit Board for MaxxFan Deluxe Roof Vent 5100KIn order to replace the circuit board on a MaxxFan Deluxe 5100K # MA00-05100K you'll want to use part # MA10A21276K. The board you mentioned would not work.
view full answer... - Solution for MaxxFan RV Roof Vent Lid 07000K That Won't Open with RemoteThe circuit board of your MaxxFan # MA00-07000K has failed and it would be time to replace it with the part # MA10A21275K.
view full answer... - Correct Replacement Circuit Board For MaxxFan Deluxe 7500KThat is correct, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K is the correct replacement for your MaxxFan Deluxe Roof Vent w/ 12v Fan, Thermostat, and Remote # MA00-07500K, and will work just fine with your LiFePO4 batteries.
view full answer... - Availability of MaxxFan Circuit Board Replacement 10C21275K I can confirm that the MaxxFan circuit board # MA10A21275K is the same as the 10C21275K that you mentioned as well. This has changed part numbers twice and what we offer is the current version.
view full answer... - Correct Replacement Circuit Board For The MaxxFan Deluxe 7500KYes, the correct replacement circuit board for your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K.
view full answer... - Troubleshooting A MaxxAir MaxxFan That No Longer Works After Replacing The Rain SensorIf swapping out the rain sensor caused your fan to complete stop working I would first double check that no fuses were tripped and that the fan is getting a full 12v DC power to properly operate. If it is then the issue is going to be with your circuit board # MA10A21275K and you'll need to replace it.
view full answer... - Wall Switch for RV MaxxFan Doesnt Work but Beeps InsteadIn the past Maxxair has told us that resetting the circuit board of your fan will fix this problem. You can do this by unplugging the fan from it's 12 volt power source then reconnecting. If that does not fix it the solution is a new circuit board with # MA10A21275K.
view full answer... - MaxxFan Deluxe Not Working With Remote But Buttons On Fan WorkIt sounds like the circuit board on your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K has gone bad, however to be sure I recommend also testing your fan motor first. What you'll want to do is disconnect the motor from the circuit board, and apply power from your battery using a jump wire, and connect a ground wire to the other wire on the motor. If you get no response from that, then your fan motor is the issue, and it'll need to be replaced with # MA10-20968. If...
view full answer... - Replacement Circuit Board For MaxxAir Roof Vent on 2017 Columbus Palomino 5th WheelCircuit boards are model specific so you will need to purchase the correct board for your model. This means you will have to look at your fan to find the model number and identify which model you have in order to choose the correct replacement part. The Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K is compatible with the following models: MaxxFan Plus: 00-04500K, 00-04700K, 00-04800K, and 00-04900K and MaxxFan Deluxe: 00-0700K,...
view full answer... - Troubleshooting Vent Lid On MaxxAir MaxxFan 4500K Not Opening With New Circuit Board and Lift MotorI reached out to MaxxAir as I was stumped since you had replaced both the parts already. Their tech said you will want to first check the voltage going into and coming out of the Circuit Board # MA10A21275K with a Meter # PT29ZR where the lift motor plug is on the circuit board. If the voltage is not 12 VDC coming out of the board then the board is bad. Then you can also get a separate power supply like a 9 volt battery and run some lead to the lift Motor # MA10-20270 to see if it rotates...
view full answer... - Troubleshooting MaxxAir Vent Fan 4951KSC Not OpeningFor your MaxxAir Vent Fan 4951KSC you'd need the replacement circuit board # MA10A21275K. I will say that since your vent has a rain sensor there is a good chance that could be causing your issue. If that part malfunctions it won't allow the vent either, and since its quite a bit cheaper its a good think to try first. For a replacement sensor you'd need # MA34FR.
view full answer...
- MaxxFan 2016 Keystone Montana Model 3710FL Won't Stop RunningIf your MaxxFan with the rain sensor, like part # MA00-04500K, starts operating automatically and the controller or the controls on the unit aren't working then that sounds like a bad circuit board or that the built-in safety feature for too much (or not enough) voltage was activated and the circuit board locked up. Since you already removed power from the vent try connecting it back to power. If it works properly then it was just locked up and needed to be disconnected from power to unlock...
view full answer... - Troubleshooting a MaxxFan 7500 That Keeps Closing On Its OwnI contacted the manufacturer regarding the issue you are describing with your MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K. They recommended first doing a reset on the fan. You can do this by removing power by pulling the fuse from the circuit the fan is on from the fuse box. Then reinsert the fuse to do a reset on the fan. If you continue to have the same issue, they said that he circuit board is likely having amperage issues and would need to be replaced. The correct circuit board...
view full answer... - Parts Needed to Upgrade MaxxAir MaxxFan 7501K to 7500K With Intake and Exhaust You will need both the Keypad # MA10-21304K and Printed Circuit Board # MA10A21275K to upgrade your MaxxAir Deluxe fan from a 7501K to a 7500K. Then you will be able to reverse your fan to intake as well as exhaust.
view full answer... - Does Replacement MaxxAir Printed Circuit Board Work With RemoteIt does yes; the existing remote on your MaxxAir fan will indeed work with the replacement circuit board, which is the following part number: - Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Manda E
Edited by:
Amanda M
Written by:
Adam Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
9/6/2023
I know that it is working for you however I am concerned that it had some damage since it is an electrical unit. I will have our Customer Service team reach out to you.