Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand - 7,200 lbs

See what our Experts say about this Dexter Accessories and Parts

• What is the Mounting Bolt Pattern for Electric Trailer Brake Assembly # 23-429
  Trailer brake assembly # 23-429 has mounting holes that are 3-5/8" apart on center side to side, 4-3/8" on center top to bottom, and 5 inches on center diagonally. The matching left hand side assembly is # 23-428.
  view full answer...
  
• Are Self-Adjusting Electric Brakes Available For 7200-Lb Trailer Axle
  The electric brake assemblies we offer for a 7,200-lb axle are manual adjust brakes. We do not offer self-adjusting electric brakes that measure 12-1/4 x 2-1/2 inch. For the right hand you would need part # 23-429, and for the left hand you would need part # 23-428. If you need a brake adjustment tool I recommend part # W80630.
  view full answer...
• Testing and Replacing Brakes on a 2012 Carriage Cameo Trailer
  I've attached an article to help you test the magnets. You also should inspect the wiring for the brake that's giving you issues. If you need to replace the brake you don't have to do both. However, it might be easier in the long run and if the others are showing wear it's a good idea. It can save you time and money later. To determine which brakes to get you can measure the inside diameter of your drums. If they're 12 inch drums then I recommend using # AKEBRK-7-SA. These are self-adjusting...
  view full answer...
  
• Brake Assembly Option for 7200 lb Rated Axle
  Unfortunately, due to the unique pad size and brake assembly mounting bolt pattern used by a 7200 lb rated axle, the Dexter # 23-429 (right side) and # 23-428 (left side) are the least expensive (and the only) replacement brake assemblies we offer for your particular axle.
  view full answer...
• Is Dexter Electric Trailer Brake Kit for 7,200 lb Axles for One Axle or Two
  The Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand # 23-428 is just one left hand brake assembly; the other side is the Dexter Electric Trailer Brake Assembly - 12-1/4" - Right Hand # 23-429. That is for one axle, and you can order them as a unit with the Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 7,200 lbs # 23-428-429. For an adjustment spoon you will need the Brake Adjustment Spoon for Drum Brakes # W80630, and the correct mounting...
  view full answer...
• Dimensions Of The Dexter Replacement Shoe Centering Spring For 12-1/4 Electric Brake Assemblies
  I went out to our warehouse and measured the Replacement Shoe Centering Spring for 12-1/4" Electric Brake Assemblies # BP07-195, and measured 2-3/4" from end to end, and 3/4" tall. Since we do not have the exact replacement for you, the best option is to replace your braking assemblies. You can check out # 23-428 for the left hand assembly, and # 23-429 for the right hand side. These braking assemblies will work great with standard hub and drum assemblies, and measure 12-1/4" in diameter,...
  view full answer...
  
• Mounting Bolt Pattern and Center Hole Diameter For Dexter Trailer Brake Assemblies 23-248 and 23-429
  The Dexter Electric Trailer Brake Assembly # 23-429 & # 23-428 have a center opening of 3-7/8" for fitting on the axle tube. It will mount to bolt holes that are 3-5/8" spread left to right and 4-3/8" top to bottom. I have included images below with both measurements to help you identify the fitment. We also have them as a Set # 23-428-429 since you will will being replacing them on multiple axles. If these will not fit your current axles please let me know your mounting pattern and the...
  view full answer...
  
• Replacement Electric Trailer Brakes for Dexter 7,000 Pound Trailer Axle
  For trailer brake assembly # 23-428 to fit the drum will need to have an inner diameter of 12-1/4 inches and a width where the pads touch of 2-1/2 inches. I have included a picture showing these locations in a drum. This brake also mounts on a 4 bolt brake mounting flange. The 12-1/4 by 2-1/2 is not a common size though. The most common size brakes for a Dexter 7,000 pound axle is going to be 12 x 2 inch that mounts on a 5 bolt flange such as # 23-180 and # 23-181.
  view full answer...
  

Do you have a question about this Accessories and Part?