Custom Fit 2008 Dodge Durango Accessories

You will be able to back up with the Reese Pro Round Bar Weight Distribution item #RE34FR set up. It may be a lot easier to remove the springbars from the weight distribution system first but it isn't necessary. You won't have any issues with…

The Dexter #DX27FR brake actuator would work great for a tandem axle trailer with drum brakes. We don't offer the mounting bolts, but you could source the grade 5 1/2 inch bolts locally. I've linked to a product description video for the…

Yes, the Dexter DX7.5L A-60 Brake Actuator #DX27FR is compatible with tandem axle trailers.

The Dexter #DX27FR would make a good replacement for trailers weighing less than 7500 lbs. The coupler is compatible with a 2 inch trailer ball, so if your trailer meets those criteria, the #DX27FR would be an excellent choice. UFP is now owned by…

If your 2005 Dodge Durango was wired for the factory wiring harness you will be able to use the Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector, item #20135, to install a 7-Way and 4-Way connector at the rear of the…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

I recommend checking out the Timbren Silent Ride Suspension #TSR7000T04 for your 2016 EZ Loader trailer. This will allow you to bolt the suspension to the trailer rather than having to have frame hangers welded on. It also uses a rubber spring…

If you already have a 7-Way connector at the rear of your 2006 Dodge Durango then the T-One #118381 is the correct part. If you don't have a 7-Way then you would need the T-One #118390 which is for an '06 Durango that doesn't have the tow…

Curt trailer wiring harness #C55381 will only fit your 2007 Dodge Durango if it came with the factory tow package. If you cannot find that factory connector anywhere then it is likely that your model does not have the factory tow package and you will…

Though we don't carry that exact part, we do have a strut with the same dimensions that is likely to work. Based on my research the gas strut 654150 is 26.46" when extended, has two metal ends and is 120 lbs of force. The strut we carry…

Since the ends of the Solera Gas Strut 26 #LC280343 are not replaceable you'd have to go with the #LC280343 to get the parts you need as well as new struts.

Your best route is to replace your entire surge brake assembly as Atwood no longer produces any parts for their brake actuators. The Titan Zinc-Plated Brake Actuator #T47457207K is going to be your best replacement available. It is specific to disc…