bing tracking image

2008 Subaru Outback Wagon Trailer Hitch Installation And Review Videos

     

Trailer Hitch Installation - 2008 Subaru Outback - Hidden Hitch- Video

Trailer Hitch Installation - 2008 Subaru Outback - Hidden Hitch

Today on our 2008 Subaru Outback wagon we'll be installing our Hidden Hitch 1-1/4" receiver tube hitch, part number 90138. Here's what our hitch will look like once it's installed. Next we'll go ahead and give you a couple measurements to assist you with selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 6". From the top of the receiver tube opening to the ground is 13-1/2". This will assist you with selecting accessories such as a ball mount, bike rack, or cargo carrier. more


Watch Video

10/29/2014 3:24:05 PM



Trailer Hitch Installation - 2008 Subaru Outback - Draw-Tite- Video

Trailer Hitch Installation - 2008 Subaru Outback - Draw-Tite

Today on our 2008 Subaru Outback Wagon well be installing the Draw-Tite 1-1/4 Receiver Tube Hitch, part number 36334. Heres what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 6 inches. From the top of the receiver tube opening to the ground is 13-1/2 inches. This will assist your selecting accessories such as a ball mount, bike rack or cargo carrier. Well now go ahead with the installation. Before we lower the exhaust were going to put a safety strap underneath so that after we remove the rubber isolators that hold the exhaust in place we can use the safety strap to safely lower the weight of the exhaust. more


Watch Video

10/29/2014 3:14:37 PM



Trailer Hitch Installation - 2008 Subaru Outback Wagon - Draw-Tite- Video

Trailer Hitch Installation - 2008 Subaru Outback Wagon - Draw-Tite

Today on our 2008 Subaru Outback Wagon we'll be installing the Draw-Tite Hitch, part number 75560. Here's what our hitch will look like once it's installed. Next, we'll go ahead and give you a couple measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is six inches. From the top of the receiver tube opening to the ground is thirteen and a half inches. This will assist you in selecting accessories such as a ball mount, bike rack, or cargo carrier. more


Watch Video

10/5/2014 10:02:34 AM



  1