2012 Nissan Juke Trailer Hitch Installation And Review Videos

Trailer Hitch Installation - 2012 Nissan Juke - Draw-Tite- Video

Today on our 2012 Nissan Juke we'll be installing the Draw-Tite hitch, part number 24867. Here's what the hitch looks like installed on the vehicle. Now we'll go ahead and give you a few measurements to help you choose some accessories for your hitch, such as a ball mount, bicycle rack, or cargo carrier. From the center of the hitch pinhole to the edge of the bumper is approximately 4". From the top of the opening of the hitch to the ground is approximately 12-1/4". Now we'll go ahead and install our hitch. To begin with we will need to remove the two hook that is located on the passenger side of the rear of the vehicle. more

1/20/2015 2:34:37 PM

Trailer Hitch Installation - 2012 Nissan Juke - Curt- Video

Today on our 2012 Nissan Juke, we'll be installing Curt Hitch, part number C11088. Here's what our hitch looks like installed. Now we'll go ahead and give you a few measurements in helping you select some accessories such as a ball mount, bicycle rack or cargo carrier. From the center of the hitch pin hole to the edge of the bumper is approximately 4 inches and from the top of the opening of the hitch to the ground is approximately 12 inches. Now let's go ahead and install our hitch. To begin with we'll need to lower the exhaust down, there are three rubber isolators that we'll need to remove. Before you remove any of the rubber isolators, you'll want to go ahead and install a safety strap to help support the exhaust once they are disconnected from the rubber isolators. more

1/14/2015 1:37:32 PM