Summer Starts Here - Save up to 70%
Best 2014 Ford Mustang Hitch Options- Video
Today on our 2014 Ford Mustang we'll be looking at our most popular hitch options. We have two hitches here today. On the top we have a Draw-Tite class one, part number 24863. On the bottom here we have a CURT class one, part number C11210. Both of these hitches look very similar. Main difference is one's a CURT and one's a Draw-Tite. more
10/28/2016 9:00:45 AM
Trailer Hitch Installation - 2014 Ford Mustang - Draw-Tite- Video
Today on our 2014 Ford Mustang, we're going to review and install the Draw-Tite Custom Fit Class I 1-1/4" Receiver Tube Hitch part number 24863. Here's what our hitch is going to look like once installed. As you can see, this is a custom fit and the square cross tube, fully welded hitch and the nice black powder coated finish really blend in well with the under body of the vehicle. Here on either side of the receiver tube is our chain hold down, the half-inch pre-drilled hole going through the receiver tube and then our 1-1/4" x 1-1/4" receiver tube which is capable of up to 200 pounds of tongue weight and 2,000 tow capacity. Next we'll go ahead and give you a couple of measurements to assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 8". From the top of the receiver tube opening down to the ground is 9-1/2, so you want to be aware of that when selecting the right ball mount or bike rack for your hitch. more
5/26/2015 1:16:06 PM
Trailer Hitch Installation - 2014 Ford Mustang - Curt- Video
Today, on our 2014 Ford Mustang, we're going to review and install the Curt Class I - 1 1/4" Receiver Tube Hitch, Part Number C11210. Here's what our hitch is going to look like once it's installed. As you can see, we've got a nice square cross-tube design. The fully welded construction and a really nice black powder coated finish, so it blends in with the under body of our vehicle. The only thing really exposed is our chain hold down that'll be on each side of the receiver tube. The 1/2" pre-drilled hole and our 1 1/4" by 1 1/4" receiver tube. more
5/22/2015 7:57:17 AM
