Best 2008 Ford F-250 and F-350 Super Duty Brake Controller Options- Video
Today we're going to be taking a look at the best brake controllers available for the 2008 Ford F250, 350 and 450 super duties. And also the F350, 450 and 550 cabin chassis. Now, all the brake controllers that we're going to look at today are proportional controllers. It's a newer technology available, and it really is just a lot better than what the time delayed systems used to be. Basically with the time delayed system, it was preprogrammed when your brakes would engage. So you hit the brake in your vehicle, there might be a pause before the brakes on your trailer actually engage. more
7/11/2018 1:17:15 PM
Trailer Brake Controller Installation - 2008 Ford F-250- Video
Today on our 2008 Ford F-250, we're going to be taking a look and and installing the Tekonsha Primus IQ Trailer Brake Controller, part number TK90160. With assistance from the universal installation kit, part number ETBC7. First thing we're going to talk about is going to be that boost button here located at the top. By pressing that you'll be able to choose between boost 1, boost 2 and boost 3. Just a straight up B right there is just going to be your regular boost off. On the side is going to be your adjustment for your power wheel. Once you have your trailer connected, as you can see right now it's going to be not connected by the NC there. more
11/17/2015 11:55:59 AM
Trailer Brake Controller Installation - 2008 Ford F-350 Cab and Chassis- Video
Today on our 2008 Ford F350 Chassis Cab, we'll be installing the Tekonsha Prodigy P2 Brake Controller, part number 90885, along with part number 3034-P, along with our Hopkins adapter 4 pole to 7 and 4 pole, part number 37185 mounted to the universal mounting bracket, part number 18136. Our first step, we'll be starting at the rear of the vehicle, attaching the mounting bracket. We'll be doing a custom install on this particular application. So we'll go ahead and take the mounting bracket and set it on the vehicle. Then we can take a paint marker, mark out the area around where we can attach the bracket to the vehicle and at this particular location it is the cross member. Then we'll go ahead and remove the bracket and pre-drill the holes into the cross member. Next, I'll go ahead and take a pair of vice grips and secure the bracket over the holes that we just drilled out. Now we'll be able to go ahead and pre-drill all the way through the bracket. Now that we finished our pre-drilled hole on the driver's side, we'll go ahead and repeat the same process on the passenger's side. more
11/18/2014 10:11:02 AM
