Best 2014 Honda CR-V Custom Fit Vehicle Wiring Harness Options- Video
Hey, everyone, Ryan here at etrailer. Today, on our 2014 Honda CR-V, we're gonna be taking a look at our best trailer wiring options. We're gonna have a few different options as far as each trailer wiring goes. So right here, we have a kit made by TEKONSHA; here in the middle, we have a kit made by CURT; and over here, we have a kit made by Hopkins. And what all these are gonna do or accomplish is send power to your trailer, letting all the lights work like they should. So you'll get your turn signals, your brake lights, as well as your taillights. more
1/29/2024 1:37:10 PM
Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Honda CR-V- Video
Shane: Okay guys, Shane here with etrailer.com. Today I have a 2014 Honda CRV, and I want to walk through how to install the Hopkins Simple Plug-In Wiring Harness. So this wiring harness is going to plug directly into factory plug behind the driver's side rear panel. It's going to have a converter box. The converter box is going to protect the factory wiring from any backfeed if there's a wiring issue with the trailer or anything else you may have this hooked up to. It's going to give you all of your proper lighting functions, brake lights, turn signals, and running lights. more
5/12/2020 1:38:01 PM
Trailer Wiring Harness Installation - 2014 Honda CR-V- Video
Today on this 2014 Honda CRV were going to install part number C56158 from Curt. This is a T-Wiring harness for the four pole flat trailer connector. To get access to our wiring harness we need to go ahead and open up the back hatch. To start off well go ahead and remove all the floor covers. Next well go ahead and take off this threshold, under is a couple of plastic fasteners that we have to remove. Now to remove these you actually push down on the center and then pop them loose. If you can, sometimes this looks easier than it is, well pull back the weather strip then we can reach underneath here and pop it loose. Well just use a plastic pry bar and kind of work our way around. more
9/24/2014 5:59:19 AM
Trailer Wiring Harness Installation - 2014 Honda CR-V 118561- Video
Today on our 2014 Honda CRV we're going to install part number 118561. This is a Tow Ready T1 Wiring Harness with a four pull flat. First thing we need to do is open up the back hatch and remove the spare tire cover. Then we're going to remove the threshold. We'll first need to remove two push pin fasteners. To remove these fasteners we'll need to use a small drill bit. more
6/19/2014 4:07:12 PM
