Hopkins Endurance Fifth Wheel Wiring Harness Installation - 1999 Ford F-250- Video
Today on our 1999 Ford Super Duty, we'll be installing the Hopkins Endurance 5th wheel 90-degree wiring harness, part number 41157. Here's a 7-way plug for our wiring harness that we're going to install. First we'll show you where we're going to mount our 7-way connector. Want to keep it kind of low on the bed. We'll make our pilot hole right here, and follow that up with a 2-inch hole saw. With our hole now cut, we'll run the wiring harness down underneath the vehicle. We'll take the included terminal grease and apply that to our connections. We can then take our 7-way connector and plug it into the wiring harness. more
7/9/2014 2:59:17 PM
Trailer Wiring Harness Installation - 1999 Ford F-250- Video
Today on our 1999 Ford F250, we will install the tow ready custom fit wiring harness, part number 118243. Before we can install the new pole and harness, we will need to remove the old and the manufacture. Theres a bolt here securing the bracket, we will remove first and then we will cut the zip tie and remove the wire connector, pressing on the locking tab and remove it from the manufactures wiring. Now we are ready to go ahead and install the new bracket hardware. Before we begin installing the wiring harness, we will need to install the bracket, one to attach to the hitch, and another to attach to the seven pole. The seven pole mounting bracket by Pollak, part number PK12711U will attach to the Draw-Tite no drill mounting bracket, part number 18136. more
11/29/2012 7:39:19 AM
