Trailer Wiring Harness Installation - 2011 Subaru Outback Wagon- Video
Today on this 2011 Subaru Outback Wagon, we're going to install part number C57674 from Curt. Now this part is going to upgrade our four-pole previously been installed on our vehicle up to a seven-pole connector. We're also going to add one additional circuit. This will be a reverse wire lead. Now this additional circuit will be used to reverse lockout on a boat trailer with hydraulic brakes. To start off our install, we'll go ahead and open the back hatch and get access to our reverse light. Now our reverse light is in the back hatch, so we have to remove the panel behind the light. more
7/3/2014 12:23:59 AM
Trailer Brake Controller Installation - 2011 Subaru Outback Wagon- Video
All right, today in this 2011 Subaru Outback Wagon, we are going to install a brake controller, part number 90195. We are also going to use a couple of other part numbers, ETBC7, to help install our brake controller and also part number 18136, in Tow Ready; this is a universal mounting bracket. We are going to start off our install using that bracket. Now our mounting bracket just clamps on to the hitch; put the bracket up to the hitch, bring the clamp around and then go ahead and secure it. We will go ahead and move the clamp and set in to place in a way we have less of the extra hanging down. Now we will go ahead and install the 7 pole bracket. more
9/17/2013 6:57:13 AM
Trailer Wiring Harness Installation - 2011 Subaru Outback Wagon 118467- Video
12/27/2012 10:21:59 PM
