Trailer Wiring Harness Installation - 2002 Chevrolet Silverado- Video
Speaker 1: Today the 2002 Chevrolet Silverado. We're going to review and install the universal wire harness, the Hopkins Multi-Tow vehicle and trailer connectors, part number HM40985.This is the connection point right here that goes behind your seven-fold connector. This is what's called the US car connector style. The cord has got a four-foot length to it and has provisions for all seven circuits. You've got ground, 12-volt power, brake controller output, left turn, right turn, run light circuit, and reverse lights. It also comes with a variety of butt connectors to suit different gauge of wires. more
6/20/2018 4:37:21 PM
Trailer Brake Controller Installation - 2002 Chevrolet Silverado- Video
Today on our 2002 Chevrolet Silverado 3500 HD, we're going to be installing the universal installation kit for trailer brake controllers with both a 7-way RV and a 4 flat style connector, part number ETBC7. In conjunction with our universal installation kit, we're also going to be installing the Tekonsha Prodigy P3 trailer brake controller, part number 90195. On our particular vehicle today that we're working with, it does have a stake bed or an aftermarket style bed installed on the vehicle, so a few things underneath may look just a little bit different. The kit does already come with some yellow butt connectors connected to the blue and black wire as well as the purple wire, but this particular customer has requested that we use some heat shrink style butt connectors wherever we use a butt connector. The butt connectors that we're going to be using are part number DW05745-5. These two wires right here, this black and the blue wire, we're going to go ahead and trim off the butt connector that comes with it. The blue wire is the wire that sends brake signal from the brake controller back. The black wire is your 12-volt hot or the 12-volt accessory wire. This purple wire that already has the connector on it, it is for the reverse light circuit, and on this particular application, we're not going to use that, so we're not even going to cut the butt connector off. more
1/5/2015 2:44:43 PM
Trailer Brake Controller Installation - 2002 Chevrolet Silverado 3025-P- Video
Today on our 2002 Chevrolet Silverado we'll be installing the Tekonsha Prodigy P3 Trailer Brake Controller, Part Number 90195. In addition to the P3 Brake Controller, we'll also be installing the Tekonsha Plug-in Wiring Adapter for electric brake controllers for GM vehicles, Part Number 3025-P. We're going to first begin by installing the Tekonsha Wiring Adapter. We're going to need to remove this cover right here. We're up underneath the driver's side near the pedals. We'll need to remove this cover on the fuse box here. Go ahead and remove this plastic nut. more
7/14/2014 6:00:02 PM
