Hyundai Elantra Roof Rack Installation And Review Videos

Rhino Rack Roof Rack Review - 2014 Hyundai Elantra- Video

Today on this 2014 Hyundai Elantra, we're going to be test fitting the Rhino Rack Vortex Aero Roof Rack System, consisting of part numbers RRVA126B-2, that's the crossbars, part number RRRLKVA, that's going to be your towers, and part number DK301, and that's going to be the clamp that holds it on to your vehicle. As you can see here, we have one already installed on the front of our vehicle. It has a nice aerodynamic shape, which is going to cut down wind noise and drag. It's very sturdy. Let's go ahead and show you how the rear one goes on, which we already have partially assembled on our table here. Now, how this works, I'm going to take our foot, and it has this bracket, or metal bracket here on the top. That's going to fit into this slot here on our crossbar like so. Now, next, you would take a strip and measure out how far this needs to be in or out. more

5/27/2016 1:16:15 PM

Rhino Rack Roof Rack Review - 2013 Hyundai Elantra- Video

Today on our 2013 Hyundai Elantra we're doing a test fit of the Rhino Rack Vortex Arrow crossbars. The part number for our crossbars today is RRVA126B-2. For our foot pack we're using is RRRLKVA. For our fit kit for our Elantra we're using DK301. We already have that front bar in place. We're going to show you how to put our back bar together throwing this last foot on there and then we'll show you how to put it on our vehicle. We'll start by taking our plastic bottom here. more

3/14/2016 11:47:50 AM

Rhino-Rack Aero Roof Rack Installation - 2013 Hyundai Elantra- Video

Today on our 2013 Hyundai Elantra we'll be test fitting the Rhino Rack 2500 Series Roof Rack System in black, part numbers da126b, and dk301. After assembling our pads and our feet, and our crossbars according to the included instructions, we'll begin our test fit by placing the front crossbar onto the front of the vehicle. We'll then measure from the center of the door jamb to the center of the foot as stated in the included instructions on both the passenger and driver side of the vehicle ensuring that the crossbar is perpendicular to the vehicle and the pads on the bottom of the feet contour to the roof correctly. Once we've established this position onto the roof, we can use the included Allen key to tighten down the black bolts on the inside of the feet to secure the front crossbar to the front of the vehicle. We'll then replace our locking caps and we're ready to load our rear crossbar. We'll place our rear crossbar onto the rear of our vehicle and measure our crossbar spread. more

5/28/2013 11:40:45 AM

Rhino-Rack Aero Roof Rack Installation - 2013 Hyundai Elantra DA126- Video

Today on our 2013 Hyundai Elantra we'll be test fitting the Rhino Rack 2500 Series Roof Rack, part numbers da126, and dk301. Now with our crossbars and feet already assembled according to the included instructions, we'll begin our test fit by first placing the front crossbar onto the front of the vehicle. We'll then measure from the center of the door jamb to the center of the foot, and this measurement will be 310 millimeters which converts to 31 centimeters. We'll measure this on both the passenger and driver side of the vehicle ensuring that the crossbar is perpendicular and the rubber pads on the bottom of the feet contour to the vehicle correctly. Once we've established this position onto our Elantra, we'll then use the included tensioning Allen key to tighten down the black bolts on the inside of the tower. Once we've done this for both sets of bolts, we're ready to load up our rear crossbar. more

5/28/2013 11:39:31 AM