Yakima Roof Rack Review - 2017 Honda CR-V- Video

Speaker 1: Today on our 2017 Honda CR-V, we're going to be test fitting the Yakima JetStream roof rack system. This is going to be consisting of part numbers Y00425, these are the JetStream crossbars. Part number Y00148, these are the SkyLine Towers, and they kind of snap into place with our landing pads. And the landing pads are going to be part number Y00245. This is specifically for the Honda CR-V.It attaches to two pre-attachment points on the actual flush mounted side rails of your CR-V, and these bars are designed to work with a wide variety of accessories. This helps you put anything you don't want inside the vehicle, outside, or just to free up a little bit more space if you need to. more

Watch Video

9/17/2018 8:27:43 AM

Rhino Rack Roof Rack Review - 2018 Honda CR-V- Video

Speaker 1: Today on our 2018 Honda CRV we're going to be test fitting the rhino rack vortex aero roof rack system. This is going to consist of part number RRVA137B-2. These are the vortex aero crossbars that you see here. These also come in silver as part number RRVA137S-2. We'll also be installing part number RRRLKVA. These are the 2500 series legs for the vortex aero crossbars, excuse me, for naked roofs. more

Watch Video

5/23/2018 11:27:47 AM

Rhino-Rack RS 2500 Vortex Aero Roof Rack Installation - 2015 Honda CR-V- Video

Today on our 2015 Honda CRV, we're going to be test fitting the Rhino-Rack RS 2500 series roof rack system part number RRRS409B. They're also available in silver, part number RRRS409. The Rhino-Rack RS roof system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle they can carry bike racks, cargo baskets, and closed cargo boxes, ski and snowboard carriers as well as kayak carriers. The two bars have a combined carrying capacity of 155 pounds although you should always double check with your vehicles manual to make sure your roof can withstand that weight. It does have the Vortex aero strips on the top and that coupled with the shape of the bar itself does cut down wind noise and drag while your driving. It also makes it capable of being used with T track accessories. Now since these are flush as you can see here, you're not going to be able to extend out further. more

Watch Video

3/9/2017 4:17:09 PM

Rhino-Rack Euro Square Roof Rack Installation - 2015 Honda CR-V- Video

Today on our 2015 Honda CRV, we're going to be test-fitting our Rhino-Rack 2500 Series square-bar roof rack system, part number DS1375B. These are the square crossbars, 54" long and part number DK284 and this is the custom fit kit for the CRV. The Rhino-Rack square-bar roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. You can carry bike racks, cargo baskets and closed cargo boxes, ski and snowboard carriers as well as kayak carriers. The two bars have a combined carrying capacity of 165 lbs, although you always want to double-check with your vehicles manual to make sure it can withstand those weights. While these are square bars there are fairings offered on etrailer.com, which you can purchase separately and that will cut down the wind-noise sound and the drag while you're driving. All the legs on our roof rack system do lock, so once you install this onto your roof, it's secure to your roof as well. Now that we've gone over some of the features of this roof rack system, let's go ahead and show you how it installs. more

Watch Video

3/7/2017 10:37:08 AM

Rhino-Rack RSP Roof Rack Installation - 2016 Honda CR-V- Video

Today in our 2016 Honda CR-V we're gonna be test fitting the Rhino Rack RSP Roof Rack System for Flush Factory Side Rails, part number RSP33. The Rhino Rack RSP Roof Rack is great for carrying accessories on your roof and freeing up space in your vehicle for you and your family. It can carry a wide variety of objects, from bike racks to roof baskets to roof boxes to ski and snowboard carriers, as well as water sport carriers such as kayaks and canoes. The bars themselves have a nice sleek look to them, and since they install directly into your flush rails, they actually look like they're factory installed. Rubber vortex strips combine with the aerodynamic shape of the bars will cut down on wind noise and drag while you're driving. Since it has these strips in the center here, you can actually remove these and use T-Track accessories with this roof rack. The carrying capacity of these two bars is gonna be 165 lbs, although you always want to double check with your vehicles manual to make sure it can withstand that weight. Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. This is gonna be attaching to fixed points on our flush rails, and here is the rear bar that we're gonna be installing. more

Watch Video

2/7/2017 1:37:35 PM

Inno Roof Rack Review - 2014 Honda CR-V- Video

Today on our 2014 Honda CRV we are going to be test fitting the inno roof rack system. This is going to be consisting of part numbers INXB108-2. Those are going to be the crossbars. Part number INXS200, those are going to be the flush feet. Part number INK413 and that's going to be the clamp that holds it onto your vehicle. We already have the front one installed. You can see it has a nice shape to it. more

Watch Video

6/27/2016 3:56:36 PM

Rhino Rack Roof Rack Review - 2014 Honda CR-V- Video

Today on our 2014 Honda CR-V we're going to be test fitting the Rhino-Rack Roof Rack System, consisting of part numbers RRVA137B-2, those are going to be the cross bars, part number RRRLKVA, and those are going to be the legs, and then part number DK284, and those are going to be the clamps holding it to your vehicle. We have the front one already installed. As you can see it has a nice aerodynamic shape. Let's go ahead and show you how the rear one goes on. We have it partially assembled on our table here already, with the parts laid out. Let's get right into it. We'll first take our leg, flip this around here so you can see a little bit better. This metal bracket here is going to slide into this channel here. more

Watch Video

6/27/2016 3:56:06 PM

Rhino Rack Roof Rack Review - 2015 Honda CR-V- Video

Today on our 2015 Honda CRV, we're taking a look at the Rhino Rack Vortex Aero Crossbars. The part number for the crossbars you're using today is RRVA137B-2. The foot pack we're using is RRRLKVA, and our fit kit is part number DK284. We already have our front crossbar in place on our vehicle. We're going to show you how to put together our back crossbar here and how we put together that last foot pack as well. Everything you see here comes with the kit. more

Watch Video

5/24/2016 3:46:06 PM

Rhino Rack Roof Rack Review - 2016 Honda CR-V- Video

Today on our 2016 Honda CRV we're doing a test fit of the Rhino Rack Vortex Arrow crossbars. The crossbar part number that we're using today is RRVA137B-2. For our foot pack here we're using RRLKVA, and for our fit kit for our CRV we are using part number DK284. Now, here we have our back crossbar. We already have our front crossbar on and secure. We're going to start with this one here, and we're going to show you how to put our last foot pack together with out fit kit, and then show you how it goes on our vehicle. We're going to start off by taking this bottom portion of our foot pack, and it just pops off just like that. more

Watch Video

3/1/2016 1:11:32 PM

Thule AeroBlade Edge Roof Rack Installation - 2015 Honda CR-V- Video

Today on our 2015 Honda CR-V we're going to take a look at the Thule AeroBlade Edge Roof Racking System with the fixed points. The part numbers for the AeroBlades are TH7602-2H7603, and our Fit Kit is 2HKIT3118. I have the first one already on, on our front one. I'm going to show you how we install this second one. I'm going to show you all the hardware that comes with it. With our Fit Kit we have our rubber padding with our metal plate. more

Watch Video

1/8/2016 1:14:22 PM

Inno Roof Rack Review - 2014 Honda CR-V INXB108-2- Video

Today on our 2014 Honda CRV, we are doing a test fit of the Inno Aero Crossbars. The part number for the crossbars we are using is INXV108-2 for the Foot Pack we have here it is INSX200 and for the Fit Kit for our CRV the part number is INK413. We already have our front bar on, we are going to show you how we put the last Foot Pack together and then how we mount the Crossbar. The first thing we will do is take the Foot Pack and we have alredy got our plate in place, so we are just going to slip that on, and then adjust it until it pops down into place. I have already tightened down side, we are first going to measure our that spread, before we tighten down that bolt in there. We want 35 7/8 inches between the two, so we are just a little off. We are just going to keep adjusting until it is in the right spot. Then we can take our included Allen Key, and again with this bolt here, we will just tighten that down, so the Foot Pack is here and it stays in place. Now we will take our rubber bottom and we are just going to fit that on the bottom of the Foot Pack and we will take our clamp and do our bolt here on the end. more

Watch Video

12/9/2015 8:56:06 AM

Thule Podium Roof Rack Installation - 2012 Honda CR-V- Video

Today on our 2012 Honda CR-V, we'll be test fitting the Thule Square Load Bar Roof Rack System using the 58 inch bars, part number THLB58 the Thule Podium Roof Mounted Foot Pack for Square Load Bars, part number TH460 and the Thule Roof Rack Fit Kit for the Podium Style Foot Pack, part number THKIT3118. To begin our test fit, we need to remove the covers on our flush mounted side rails. Now we'll remove the covers that cover up our bolt holes. With our roof rack system assembled according to the instructions, we'll go ahead and place our first bar directly onto the front part of our roof. We want to make sure that the feet of our front bar line up nicely with the appropriate holes. Once we have it in place and once the overhang of our bars are even, we can then tighten down our foot pack to our bar, so they don't slide around. Once we have our foot packs tight, we can then grab our bolts and our Allen key and mount our feet to our flush mounted side rails. With both bolts tight on their side, we'll move to the driver side and repeat the same process. more

Watch Video

6/13/2013 8:16:19 AM

Thule Podium Roof Rack Installation - 2012 Honda CR-V TH460- Video

Today on our 2012 Honda CR-V we'll be test fitting the Thule Square Load Bar System on to our flush-mounted side rails. We'll be using thlb50 for our 50 inch square load bars, part number th460 for our Thule Podium Roof Mounted Foot Pack for our square load bars, and part number thkit3118 for the Thule Roof Rack Fit Kit for podium-style foot packs. We've already assembled our roof rack system according to the instructions. To begin our test fit we'll need to remove the covers for our flush mounts. There should be 3 tabs for each mount, one on top of the flush mount, and then two round tabs covering our bolt holes. Once we have all of our covers removed, we can then place the front half of our carrier onto our front mount. more

Watch Video

6/13/2013 8:15:16 AM

  1