2013 Ford F-150 Trailer Brake Controller Installation And Review Videos

Best 2013 Ford F-150 Brake Controller Options- Video

Today we're going to be taking a look at the best brake controllers available for the 2013 Ford F-150. Now, all the brake controllers that we're going to look at today are proportional controllers. It's a newer technology available, and it really is just a lot better than what the time-delayed systems used to be.Basically, with the time-delayed system, it was pre-programmed when your brakes would engage. So you hit the brake in your vehicle, there might be a pause before the brakes on your trailer actually engage. With the proportional controller, we don't have to worry about that. If we hit our brakes on our truck, our brakes are going to start being applied, and they're going to be applied in proportion to how we're braking in our truck. more

7/11/2018 3:22:34 PM

Trailer Brake Controller Installation - 2013 Ford F-150- Video

Today, we're going to show you part number 51110 from Curt. This is the Venturer Trailer Brake Controller. Now also to help us with our install, because our brake controller is going to plug in to the factory tow package port underneath the dash, we'll be using part number C51436. This is the Curt Custom Wiring Adapter for Trailer Brake Controllers. Here's the brake controller we have mounted in our truck. We'll go ahead cover some of the features and controls. First off, this is your manual override on your trailer. more

2/3/2015 7:13:03 PM

Trailer Brake Controller Installation - 2013 Ford F-150 22292- Video

Rate your transcript OrderClientKevin BrossRef #20461Order #TC0761711308 Today on our 2013 Ford F-150 SuperCrew Cab, we're going to be installing the Tekonsha Prodigy P2 trailer brake controller, part number 90885. In addition to the brake controller, we're also going to be installing the Tekonsha Tow Ready, plug-in wiring adapter for electric brake controllers for Ford F-150s, part number 22292. Now, we did not currently have a trailer hooked up to our vehicle. We'll go ahead and slide the manual override. You'll see that it reads NC for not connected. We'll go ahead and now plug in our trailer to the rear of the vehicle. Now, we can go over some functions of the brake controller. more

8/13/2014 3:36:24 PM