Best 2010 Hyundai Santa Fe Trailer Hitch Options- Video
Hey everybody, Ryan here at Etrailer. Today, we're gonna be taking a look at our best trailer hitch options for your 2010 Hyundai Santa Fe. So, we're gonna be looking at three different hitches today. Up here, we're gonna have the CURT hitch, which is a class three, so it's gonna have that two inch by two inch opening. Right here, we're gonna have the Draw-Tite class three. That's also gonna have that two inch by two inch opening. more
3/9/2021 12:31:15 PM
Trailer Hitch Installation - 2010 Hyundai Santa Fe - Draw-Tite- Video
Today on this 2010 Hyundai Santa Fe, were going to install part number 75684 from Draw-Tite. This is what the hitch looks like once installed on the vehicle. Next well go ahead and give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack or a cargo carrier. From the center of the hitch pinhole to outside edge of the bumper is going to be 3 inches and from the top of the receiver opening down to the ground is going to be 13 inches. Now well go ahead and show you how the hitch is installed.First off, well show you where the hitch attaches to the vehicle. There are two weld nuts that are located at the bottom of the frame close to the bumper. more
7/17/2012 1:55:13 PM
Trailer Hitch Installation - 2010 Hyundai Santa Fe- Video
Today on our 2010 Hyundai Santa Fe we're going to install the Curt Hitch, part number C13073. Here are a couple of measurements that will assist you with selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 4-1/2 inches. From the top of the receiver tube to the ground is 14-1/2 inches. This will assist you with selecting accessories such as a draw bar, a bike rack, or a cargo carrier. Now, lets go ahead with the installation. more
4/16/2012 12:00:13 PM
