Firestone Coil-Rite Air Helper Springs Installation - 2007 Chevrolet Suburban- Video
Speaker 1: Today in our 2007 Chevrolet Suburban, we'll be having a look at and installing the Firestone coil ride air helper springs for the rear axle, part number F4108.All right, here's what our airbags look like installed. These airbags are a suspension enhancement option that's available for our suburban that will allow us to support an additional 500 to 1,000 pounds of weight depending on our application. Now, these won't give us an additional 500 to 1,000 pounds of gross vehicle weight rating or allow us to tow an additional 500 to 1,000 pounds of weight. These will just help maintain that ride height when we have a heavy load that we're towing or on the back of our vehicle by having the level ride height or factory ride height, depending on how you look at it. This will help reduce tire wear, help improve braking, and help keep our headlight angle at a factory location, thus maintaining our factory-like handling characteristics.Now that we've gone over some features, we'll show you how to get them installed. The first thing we need to do is get some measurements before we have any weight on our vehicle with the factory suspension in place. more
9/27/2017 8:33:18 AM
Timbren Rear Suspension Enhancement System Installation - 2011 Chevrolet Suburban- Video
Today on a 2011 Chevrolet Suburban were going to install part number TGMRYS4 from Timbren. The first thing we need to do is get underneath the vehicle and remove the original bump stop. This will be pretty easy on this particular vehicle. Well just go ahead and grab it and just pull it loose from its fitting. Okay, now well go ahead and show you how the new Timbre spring will go into place. Itll basically push into place and held in like friction like the old one. more
11/13/2012 3:34:58 PM
Timbren Rear Suspension Enhancement System Installation - 2005 Chevy Suburban- Video
Today we are working on a 2005 Chevy Suburban. We will be installing Timbren suspension enhancement system part number TGMRYS4. Our first step is going to be to remove the existing bump stop. Sometimes it will be necessary to actually get a tool in around the bump stop to pry it out. As you can see, ours came out pretty easily. For installation of our new bump stop, we fit it in to the bump stop cup and now we are going to use the vehicle weight to actually push it back in place, using a couple of wood blocks. Now I am going to lower the vehicle weight on to the bump stop. Now we can go ahead and raise the vehicle back up and remove our blocks. Now that we have the driver side installed, I am going to go ahead and repeat the same process on the passenger side. And that completes the installation of our Timbren suspension, part number TGMRYS4. more
7/21/2011 12:32:00 PM
Filter Videos
Filter Videos
