Curt Double Lock Flip and Store Gooseneck Hitch Installation - 2009 Chevrolet Silverado- Video
Today on our 2009 Chevrolet Silverado 2500 we're going to take a look at, and also show you how to install, the curt double lock flip and store under bed gooseneck hitch with installation kit. Part number is C60712. Here's what our gooseneck is going to look like installed and not in use. That's one of the biggest advantages to the flip and store system is that we're able to use our bed completely when not in use. We're not like the old school style where we just had a ball always sticking up in the middle of the bed. When we're ready for use, we're going to pull the black rubberized protective cap off. That keeps out any dirt, grime, stuff like that. more
5/31/2017 11:09:35 AM
B and W Underbed Gooseneck Trailer Hitch Installation - 2016 Chevrolet Silverado 3500- Video
Today on our 2016 Chevrolet Silverado 3500 we're going to take a look at and also show you how to install the B&W Turnoverball underbed gooseneck trailer hitch with custom installation kit. Part number is BWGNRK1016. Here's what our gooseneck's going to look like installed on our truck and not in use. As you can see, we're going to have full, unobstructed access to the bed of the truck. Can use it to haul around whatever it is that we would like. When it is time to use the gooseneck, what we'll be able to do is pull the locking handle on the outside, raise our ball up and out. We can rotate that over, get that slid right back in position, release our handle so it comes through the ball. more
2/24/2017 10:42:38 AM
Gooseneck Hitch Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevrolet Silverado, we will be installing the B&W Turnoverball underbed gooseneck trailer hitch with custom installation kit, part number BWGNRK1067. All right, here's what our gooseneck looks like installed. As you can see, it sits down flush in the bed of our truck with our safety chain loops in the bottom channels of our bed so we don't lose any of our valuable space in the bed of our truck at all. Our safety chain loops are spring-loaded for ease of use. Our ball, which has a 7,500 pound vertical load limit and a 30,000 pound max gross trailer weight rating . You'll want to consult with the owner's manual of your Silverado and not exceed the limits of the vehicle itself or the hitch and cause damage to either one. Now, when we're not towing, our ball can be stored in our gooseneck upside-down. We have this easy-to-use handle right here to lower it on down in. more
2/15/2017 11:04:07 AM
Curt EZr Double Lock Underbed Gooseneck Hitch Installation - 2013 Chevrolet Silverado- Video
Today on this 2013 Chevrolet Silverado, we're going to review and install Curt EZr Double Lock Underbed Gooseneck Trailer Hitch, part number C611-624. All right, this is what the hitch looks like once it's installed in the bed of our truck. The nice part about our hitch here is that you have full access to the bed of your truck, so it's not like you even have a hitch in here. Let's go ahead and pop of the cover and take a look at it. Nice cover it plugs right into, it's got a nice cool chrome trim ring. Reach in and pull out our hitch ball, when you're ready to use gooseneck trailer let's go ahead a flip it over, put it back in. more
2/14/2017 2:15:04 PM
Gooseneck Trailer Hitch Installation - 2011 Chevrolet Silverado- Video
Video: etrailer.com. etrailer.com.Speaker 3: Today on our 2011 Chevrolet Silverado 2500 HD we're going to be showing how to install the Draw-Tite hide-a-goose underbed gooseneck trailer hitch with installation kit. Rated for up to 30,000 lbs, the part number is 9465-56. Now, when not in use, this is what our gooseneck is going to look like. It's going to be nice and convenient. As you can see this has the drop-in style bed liner and our safety chains re going to sit just about flush with the top of that. They would sit lower if this wasn't in here but you see we just put some zip ties on it so you get ahold of them. On a spray-in bed liner or a normal bed liner you won't have to deal with that. We're going to have a small magnetic cap that's going to sit right on top of the gooseneck. more
11/1/2016 1:36:46 PM
Gooseneck Trailer Hitch Installation - 2016 Chevrolet Silverado 2500 C607-604- Video
Today on our two016 Chevrolet Silverado two500HD, we're going to be taking a look at and installing the CURT Double Lock Flip and Store Under-bed Gooseneck hitch with installation kit, part number C607-604. Here's what it looks like once it's installed in the truck. You can see from underneath here, you're able to see it's key feature, which is the double locking pins on the locking mechanism. That's going to help provide added security for when the ball's in place. When I pull the locking mechanism out, you can see the two pins that are used to help secure the ball into the hitch. There you can see the spring-loaded action in order to reinsert the locking pins. Here's what it looks like from inside the bed of the truck. more
10/25/2016 2:41:43 PM
B and W Gooseneck Trailer Hitch Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevrolet Silverado 3500 HD we're going to be taking a look at and installing the BMW turnover ball underbed gooseneck trailer hitch with custom installation kit, Part Number BWGNRK1012. Here's what it looks like once it's installed on the vehicle. As you can see, we've got the gooseneck ball here. This is a 2-5/16th inch ball. It's a solid construction ball so it's going to be really nice and heavy-duty. That, along with the overall design of this, helps to give it a 7,500 pound vertical load limit and a 30,000 pound max towing capacity. One of the best features about this is that you're able to flip the ball over and store it away. That way it's a hitch when you need it and a level bed when you don't. more
10/19/2016 12:07:58 PM
Gooseneck Hitch Installation - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado 3500 HD, we're going to be taking a look at and installing the B and W turnover ball underbed gooseneck trailer hitch with custom installation kit, part number BWGNRK1067. Here's what it's going to look like once it's installed on your vehicle. As you can see, we've got the ball right here for the gooseneck hitch and that's about all you really have that's in the bed. When you're using your hitch if you're, say camping or traveling or anything like that, you can still put some other things in the bed around it because you're not going to have the set of rails that's up top and the big fifth wheel; you're just going to have this ball right here in the center. It's going to be a lot more convenient for you. In order to lock and unlock the ball in place, you pull out on this handle and turn it clockwise and it'll stay in the unlocked position. Then when you're ready to lock your ball back into the hitch, whether the up or down position, simply pull out on it, straighten it out, and let it pull back in and latch that ball in place. more
10/5/2016 1:28:40 PM
B and W Underbed Gooseneck Trailer Hitch Installation - 2016 Chevrolet Silverado 2500- Video
Today on our 2016 Chevrolet Silverado 2500, we're going to take a look at and also show you how to install the BMW turnover under bed gooseneck trailer hitch with the custom insulation kit. Rated for up to thirty thousand pounds, the part number is BWGNRK1016. Here's what our goose-neck's going to look like installed in the truck. When not in used this is what the goose-neck kit's going to look like. You can see it's about flush with the top of our bed rail here. Our safety chain connection points are down in the lower portion of the bed. more
7/28/2016 11:47:07 AM
Gooseneck Trailer Hitch Installation - 2013 Chevrolet Silverado - Curt- Video
Today on our 2013 Chevrolet Silverado 2500 HD we will be installing the Curt Double Lock Flip and Store Underbed Gooseneck Hitch with Installation Kit rated up to 30,000 pounds. Part number C607-604. All right, here's what our gooseneck hitch looks like installed once it's in the storage position on our Chevy Silverado here. As you can see, it doesn't stick up to very far at all above our bed floor, so when we need to load like a sheet of plywood or dry wall or something into our truck bed, it's not going to get in the way of that and cause any damage to it. It sits basically flush with the raised rails here on our bed floor. We have our nice spring loaded safety chain loops for when we need to attach safety chains on our gooseneck trailer. more
6/14/2016 3:22:03 PM
Gooseneck Trailer Hitch Installation - 2011 Chevrolet Silverado - Curt- Video
Today on our 2011 Chevrolet Silverado 2500 with a 6 1/2 foot bed we'll be taking a look at and installing the CURT double lock flip and store under bed gooseneck hitch with installation kit, part number C607-604. Here's what our gooseneck is going to look like once it's installed. You're going to see that it's going to have a nice flush look on the back of the vehicle. Everything is going to be low profile, down in the corrugation, and you'll even have a cover over the top when you don't have any use and when it's in the stowed position. That cover is included. It's going to have a real easy installation. The only drilling is going to be to put that four-inch hole in the bed of the truck and the two holes for the chain tie-downs that are going to be spring-loaded on the sides. more
2/3/2016 11:21:07 AM
B and W Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 1500- Video
Today on our 2015 Chevrolet Silverado 1500, we're going to take a look at and show you how to install the B&W turnover ball. This is an underbed gooseneck trailer hitch with custom installation kit, rated for 30,000 pounds. Part number is BWGNRK1057. Now, here's what our gooseneck's going to look like installed when we're not using it. As you can see, it's going to give us full access into the bed, not really all that noticeable. We'll be able to move things in and out of here without any real kind of an issue. more
1/12/2016 10:16:36 AM
Gooseneck Trailer Hitch Installation - 2010 Chevrolet Silverado- Video
Today on our 2010 Chevrolet Silverado, were installing our Hide-A-Goose under-bed gooseneck trailer hitch with installation kit, part number 9465-54. We have our gooseneck in place. The nice thing about it is weve got our spring loaded safety straps here so you can put your chains on that. You have here all locked in place. It also allows for easy storage. Compared to a fifth wheel, you can still use the bed of your truck in this position and you dont really lose any space in your bed. With the fifth wheel, you still have the big massive neck in place where you do lose some of that and even when you take that out, you still have the rail sticking up pretty high. more
12/8/2015 12:08:12 PM
Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 2500- Video
Today on our 2015 Chevrolet Silverado 2500 we're going to review an install, the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch, part number 9465-56. Now, here's what our gooseneck looks like once it's installed. We have no ball installed at this time and our pin is in the locked position as we can see it down through the Gooseneck throat. Now if we pull the handle out, put it in the locked position it will hold it out, allowing us to put our Gooseneck ball in place. Note there's a small nipple here on the Gooseneck throat that will line up with the groove in our Gooseneck ball. We can take our ball and drop it into the Gooseneck hitch. more
9/2/2015 3:57:54 PM
Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 3500- Video
Today on our 2015 Chevrolet Silverado 3500, we'll be installing the Hide-A-Goose Underbed Gooseneck Trailer Hitch with installation kit, part number 9465-56. Here's what our gooseneck looks like when it is installed onto our truck. As you can see, you have you have your tie down loops for your safety cables. When you're not using it, it does come with this nice nice magnet cover that keeps dust and debris out of that, so you can set that aside. Then when you want to use your gooseneck, you can go ahead and pull the handle, drop the gooseneck ball down into place, close the handle up. As you can see, nice and secure, not going anywhere and when you're done towing and you want to store your ball inside your gooseneck, go ahead and pull the handle, take the ball out, flip it upside down, reengage your handle, take your dust cover, put it in place and you're good to go. Now we'll go ahead and lower our spare tire to get it out of the way. more
4/14/2015 11:06:50 AM
B&W Gooseneck Trailer Hitch Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevy Silverado 3500, we're going to be installing the B & W Turnover Underbed Gooseneck Trailer Hitch, part number BWGNRK1062. Here's what our hitch will look like once it's installed. Now let's go ahead and go through the operation of the handle and gooseneck ball. Here on the driver's side is the handle for locking the ball in place. To unlock the handle, we'll pull out, rotate it towards the cab and it holds the handle out, keeping the pin inside the gooseneck head away from the center section so that we can remove the gooseneck ball. Now we can take it out and turn it over. We can then put it in the stored position and then re-lock the handle. more
3/3/2015 3:47:52 PM
B and W Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 3500- Video
Today on this 2015 Chevrolet Silverado 3500 crew cab we're going to install part number BWGNRK1012. This is the B&W Turnover Ball Underbed Gooseneck Trailer Hitch with the Custom Install Kit. We'll go ahead and try it out. We'll go ahead and pull on the handle and rotate it to the front. You pull out the ball. If you want to we can store it inside. more
1/30/2015 12:02:25 PM
Gooseneck Hitch Installation - 2014 Chevrolet Silverado 2500- Video
Today on our 2014 Chevy Silverado 2500 we'll be installing the Blue Ox Diamond Hitch Underbed Gooseneck, part number DH1314. We'll go through operation of our new Blue Ox gooseneck ball. The ball has this special design groove that will line up with a nipple that sticks out inside the gooseneck throat. We'll line it up, push in on the lock, and twist and lock the gooseneck ball into place. Then, we can unlock it by pressing on the spring-loaded lock, twist and unlock the ball from its position. Then when keeping it in a stored position, we'll simply turn it over, again line up the groove, and drop it into place. more
1/23/2015 5:43:29 AM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today on our 2007 Chevrolet Silverado 2500 HD Extended Cab we're going to be installing the Reese fold-down gooseneck trailer hitch with installation kit, part number 8339-4434. Now here's what our Reese fold-down gooseneck hitch looks like installed on the bed of our vehicle. Now let's go ahead and go over some operation. To use the ball you'll simply lift up here on this ring. This will allow the ball to be raised into the upright position. When you're done towing you simply raise the lever again. more
12/10/2014 2:49:30 PM
B and W Gooseneck Trailer Hitch Installation - 2015 Chevrolet Silverado 2500- Video
Today on our 2015 Chevrolet Silverado 2500 HD crew-cab, we're going to be installing the B&W turnover ball under-bed Gooseneck trailer hitch with custom installation kit, part number BWGNRK1012. Now, let's go over the operation of how the ball works. You'll pull the handle out here in the driver side wheel-well, rotate it forward. That's in the locked open position that will allow you to either put the ball in the up or flip it over and put it into the store position. Once that's done, you'll go ahead and twist the handle and release, and that will lock it back into place. Now, we'll go ahead and pull the handle in the driver side wheel-well to the unlock position. We can then install out ball. With the ball down in the upright position like this, we'll go back to the wheel-well where we'll release the handle into place locking the ball into place with the pin. more
9/30/2014 12:03:24 PM
B and W Gooseneck Trailer Hitch Installation - 2013 Chevrolet Silverado- Video
Today, on a 2013 Chevy Silverado, well be installing the B&W Turnover Underbed Gooseneck Trailer Hitch, part number BWGNRK1057. Now we can go over operation of our new Gooseneck Hitch and Ball. To install our gooseneck ball, well simply pull out on the hitch handle, rotating it towards the cab of the pickup to lock the pin out so we can then take the ball and drop it into the throat of the gooseneck hitch. Then to release the handle, well simply rotate it towards the rear of the vehicle and the spring pressure will close the pin on the gooseneck ball.Once were finished using our new gooseneck ball, well simply pull the handle on the pin again locking out the hitch pin, taking the ball out, turning it over and putting it back down into the throat of the gooseneck hitch and releasing the handle, locking the pin back in position and locking the ball in the stored position. To begin our install, well first go ahead and lower and remove the spare tire and remove both rear wheels. While its not a requirement, itll give us a lot more working room and make an easier install. more
8/13/2014 5:39:47 PM
Gooseneck Trailer Hitch Installation - 2009 Chevrolet Silverado- Video
Today on our 2009 Chevrolet Silverado were going to be installing the Blue Ox Underbed Goose Neck Trailer Hitch, part number DH1307. One thing that sets this goose neck apart from others is its ability to allow you to install or remove the goose neck ball without having to go around to the wheel well to pull the handle to unlock or lock the goose neck ball in place. Before we show you how to install this kit well show you what it looks like and how it works. To install the goose neck ball youll line it up with the hole, place it in and push in the locking tab and twist. This will lock it into position. To remove it you simply reverse that process. When not in use you can simply turn it upside down and lower it into place. Now lets show you how to install it. more
7/22/2014 2:51:26 PM
Gooseneck Hitch Installation - 2013 Chevreolet Silverado- Video
Today on this 2013 Chevrolet Silverado Crew Cab, we're going to install part number DH1314. This is the Blue Ox Diamond Hitch Underbed Gooseneck. With our hitch fully installed, we can install the ball. We'll sit the ball in place and rotate until it goes into a track. There's a pin that will follow this track right here into place. Then to make it go down, you push down the tab, it keeps rotating, you have to go up and down, rotate into place until this tab fits in right here. It's locked into place and it can't go anywhere. To remove it, pull back on the pin, and just rotate it back out using the up and down motion. more
7/17/2014 1:16:18 PM
B and W Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today, in this 2007 Chevrolet Silverado, New Body extended cab, we're going to install part number BWGNRK1057. Let's take a quick look into the operation of the hitch. It's in the locked position so we'll go ahead and pull it and twist it towards the front and it holds it open. Now, when we lock it, pull back, push it back down, let it slide back in. We have our hitch open, with the lock pulled out then we go ahead and install our ball. It's in place like that, we lock our handle. more
4/21/2014 3:52:11 PM
B&W Gooseneck Trailer Hitch Installation - 2013 Chevrolet Silverado 2500- Video
Today, on our 2013 Chevy Silverado 2500, we'll be installing the B&W Gooseneck, part number BWGNRK1012. We'll go ahead and review the operation of our new gooseneck hitch. With our handle in the lock position, we can go ahead and pull out on the handle, twisting it towards the front of the vehicle, moving it to the unlock position. We'll go ahead and take our ball, drop it in position, and there's no front or back to this ball, as it has pre-drilled holes all the way around to line up with the pin. We'll go ahead and drop it in place, then, to lock the handle, we'll simply take it, rotate it towards the back of the pick up bed, and it will lock back into position. Then, once we want to move our ball into the stored position, we'll go ahead and unlock the handle again, turn the ball over, and relock the handle. Now, to begin our install, we've already gone ahead and lowered and removed the spare tire and raised the vehicle up and removed both rear wheels. While it's not mandatory to do this for the install, it will make it a lot easier and give us more working room, both in the wheel wells and underneath. Next, we're going to lower the exhaust. To do this, start removing the rubber isolators. more
4/17/2014 9:12:12 AM
B and W Gooseneck Trailer Hitch Installation - 2011 Chevrolet Silverado- Video
Today in our 2011 Chevy Silverado we'll be installing the BNW under bed gooseneck trailer hitch. Part number BWGNRK1012. We'll go ahead and go over operation of our new gooseneck hitch. With our gooseneck handle in the lock position, we'll need to unlock it to put our gooseneck ball in place. We'll pull the handle out, rotate the handle forward to hold it out in the unlock position. Then we'll go ahead and take our gooseneck ball, drop it in place, and relock the handle by pulling out on the handle, shifting it back towards the rear of the vehicle, letting it go and the spring will lock it into place. more
4/9/2014 1:35:33 PM
Gooseneck Trailer Hitch Installation - 2014 Chevrolet Silverado 3500- Video
Today in this 2014 Chevrolet Silverado 3500, we're going to install part number 9465-56. This is the Hide-A-Goose underbed gooseneck trailer hitch. We went ahead and already moved the spare time and the back tires and wheels in the back axle. We don't have to do these steps, you can't simply take the load off the suspension, make things easier, but this will make everything easier to see and do. Next, we're going to lower the heat shield for spare tire and then we're going to lower exhaust. To do that, we're going to loosen up the nuts on the exhaust at difference 00:36 connection point going up towards the truck, but we're not going to take them off. more
4/3/2014 11:33:20 AM
Reese Fold-Down Gooseneck Trailer Hitch Installation - 2014 Chevrolet Silverado 2500- Video
Alright today on a 2014 Chevrolet Silverado 2500 crew cab we're going to install part number 8339-4456. This is a fold down gooseneck trailer hitch, to start out our install we'll go ahead into the truck rail. To do that we're going to go ahead and remove each shield for the spare tire, now the spare tire shield is easy, just 2 bolts to remove and set to the side. Then we'll go ahead and lower our exhaust, to do that we'll use a strap at the very end of the tip to help support it, while we go ahead and take off the rubber hangers. To remove the rubber hangers we'll spray them down with some lubricant then pry them off using a pry bar. To give us extra leverage we'll go a head using a block of wood as well. more
3/31/2014 4:15:59 PM
B and W Gooseneck Trailer Hitch Installation - 2014 Chevrolet Silverado 2500- Video
Today on our 2014 Chevrolet Silverado 2500 we'll be installing the B and W turnover ball under bed goose neck trailer hitch, part number BWGNRK1012. Now we'll begin first by lowering down the spare tire and sitting it out of the way for now. Next, we'll go ahead and remove each of the rear wheels and sit those aside for now as well. Next we're going to go ahead and remove the fender liners. To do this we'll need to remove four screws and three push fasteners. Now we'll go ahead and repeat the same process on the driver's side. Next we'll go ahead and secure the exhaust using a safety strap. more
3/28/2014 5:10:47 PM
B and W Gooseneck Trailer Hitch Installation - 2013 Chevrolet Silverado BWGNRK1012- Video
Today in our 2013 Chevy Silverado, we'll be installing the B and W under-bed gooseneck trailer hitch, part number BWGNRK1012. Let's go ahead and go over operation of the new gooseneck hitch. To pull the handle out to put our ball into position, we'll rotate it toward the cab of the vehicle, locking it in the unlocked position. Then once we drop the ball in position, we'll go ahead and rotate the handle toward the rear of the vehicle, unlocking the handle and allowing it to lock the ball into place in the gooseneck hitch. Then to turn the ball over, we'll simply pull the handle back out, turn the ball over, drop it back into place and then release the handle. Now we'll go ahead and install our new under-bed gooseneck hitch. To begin our install, we've already gone ahead and lowered and removed the spare tire and then we'll remove both rear wheels. While it's not required, it makes it a lot easier to install the new hitch. We'll remove the exhaust. To remove the exhaust, we'll need to remove each of the rubber isolators from the metal hanger and the two bolts at the flange just forward of the muffler. more
3/10/2014 9:39:52 AM
Gooseneck Hitch Installation - 2005 Chevrolet Silverado- Video
Today on this 2005 Chevrolet Silverado Crew Cab 2500 Series HD, we're going to install the B & W Turnoverball Under Bed Gooseneck Trailer Hitch with custom installation kit graded for 30,000 pounds, part number BWGNRK1067. Let's take a quick look into the operation of the hitch. First, we'll go ahead and pull out the handle to unlock the ball. You can see how we can pull it out and then here we can store in the hitch upside down. Then we'll lock the handle to lock the ball in place. Then we're ready to use it. more
2/14/2014 4:43:25 PM
Gooseneck Trailer Hitch Installation - 2009 Chevrolet Silverado C60606- Video
Today, in our 2009 Chevy Silverado, we'll be installing the CURT Double Lock Gooseneck Hitch, part number C615-632. Next, let's go ahead and go to the operation of our new gooseneck hitch and ball. To release the handle, we'll pull out, rotate it to the unlock position. Then we can install the ball. To install the ball, we'll lineup the groove in the ball with the nipple in the gooseneck cylinder. We'll drop the ball in place and then release the handle locking the ball to the gooseneck. more
2/12/2014 2:17:28 PM
Gooseneck Hitch Installation - 2007 Chevrolet Silverado New Body- Video
Today on our 2007 Chevy Silverado, New Body style, we'll be installing the B and W Turnover Ball, Underbed, Gooseneck trailer hitch with custom installation kit, rated for 30,000lbs. Part number BWGNRK1067. Now we've already gone ahead and removed the spare tire, as well as pulled both the rear wheel off the vehicle. Next we'll need to go ahead and lower the exhaust down, we'll do this by removing the rear rubber exhaust hanger and letting the exhaust hang down low enough. Now we'll need to remove the heat shield, or at least a portion of it. The directions say to remove between crossmember and crossmember, but it's actually between the hatch channel of the actual bed, not the crossmember or the frame of the vehicle. You really only need to remove the heat shield in between the two hatch sections on the bed, to do this you can either use a set of tin snips or a cutoff wheel. Now that we have the heat shield out of the way, now we need to go into the bed of the vehicle and mark our location where we'll be drilling a 4-inch hole through the bed of the vehicle. more
12/16/2013 8:45:34 PM
Gooseneck Trailer Hitch Installation - 2008 Chevrolet Silverado- Video
Today, on our 2008 Chevy Silverado, well be installing the Draw-Tite Hide-A-Goose Underbed Gooseneck Trailer Hitch, part number 9465-34. Note, to begin our install, weve already gone ahead and lower to remove the spare tire. Next, were going to remove both sets of rear wheel. Once our rear wheels are out of the way, remove the back half of the exhaust by unbolting it here at the exhaust clench removing the three nuts and then the two rubber isolators. Once we do this, well go ahead and take the exhaust and set it aside for installation later. Next, well go ahead and get in the bed of the vehicle. more
8/16/2013 12:49:22 PM
Gooseneck Trailer Hitch Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevy Silverado, we will be installing the Hide-A-Goose, Under-Bed Gooseneck Trailer Hitch from Draw-Tite, part number 9465-56. To begin with well need to go ahead and remove the mud flaps on this particular vehicle as well as the inner fender liners. To remove the inner fender liners, a trim panel tool will help you get the fasteners out. There are multiple fasteners that need to be removed. To make things a little bit easier, to get our Hide-A-Goose into place, we are going to go ahead and loosened up the bed bolts so that we can slip some blocks of wood in between the bed of the frame and give us a little clearance.With an extra set of hands, we'll go ahead and with the bed up and slide R block of wood into place. Now are going to need to go ahead and mark on our heat shield where will need to cut and remove it. more
8/14/2013 11:42:52 AM
Gooseneck Trailer Hitch Installation - 2008 Chevrolet Silverado 9465-54- Video
Today on this 2008 Chevrolet Silverado were going to install part number 9465-54. This is a Hide-a-goose hitch. To start off our install we went ahead and removed the two rear wheels to make access to the side brackets a little bit easier. We also lowered the spare tire as well. Starting on the drivers side of our frame, theres a cable bracket which holds the brake line to the inside of the frame rail. Well go ahead and loosen this bracket from the top of the frame rail and then remove it completely from the wiring harness and the brake line. more
5/20/2013 9:39:28 AM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado New Body DH1304- Video
Today on our 2007 Chevy Silverado 2500 HD, we'll be installing the Blue Ox Diamond Hitch, part number DH1304. We've already gone ahead and removed the spare tire as well as the two rear wheels on the vehicle. We've removed the two rear wheels only for demonstration purposes so that you will be able to see what we're doing. We'll now go ahead and measure on the underside of the bed from the rear of the bed making sure not to include the tailgate forward. We'll insure that the location of the ball is approximately one inch in front of the centerline of the axle. We'll now go to the top side of our bed where we'll use a tape measure to find the center of our bed. We'll measure from the two wheel wells across. more
4/10/2013 3:01:56 PM
Gooseneck Trailer Hitch Installation - 2013 Chevrolet Silverado- Video
Today on this 2013 Chevrolet Silverado were going to install part number 9465-56. This is the Hide-A-Goose installation. The first thing were going to do is prepare our truck to install the hitch. First off were going to lower the spare tire out of our way, and were also going to remove the tires and wheels from the rear axle. We dont have to do this part but it makes things easier to see and do and get access to the fasteners. Were also going to loosen up the exhaust. more
3/1/2013 10:15:42 AM
Gooseneck Trailer Hitch Installation - 2007 Chevrolet Silverado- Video
Today on this 2007 Chevrolet Silverado were going to install part number 9465-34. Were going to start off our install with the rear wheels removed and the spare tire lowered out of the way. You dont have to do this, but it makes access to the insulation and hitch a lot easier. Now this vehicle has an OEM brake controller installed in the frame rail, so theres two bolts we have to loosen up so we can remove it from the rail. All we have to do is just loosen up the bolts, push it to the side and we can remove it from the frame. Were going to let it sit inside the frame for now. more
1/24/2013 7:11:55 AM
Filter Videos
Filter Videos
