Trailer Hitch Installation - 2016 Audi Q5 - Draw-Tite- Video
Today on our 2016 Audi Q5 we'll be installing the Draw-Tite Class III Max Frame Trailer Hitch Receiver, part number 75940. All right, here's what our hitch looks like installed. As you can see, it's very well hidden behind our factory bumper cover here. Tucks up nicely behind it. The one part really hanging down is the class III receiver with the 2 by 2 inch opening, and then our safety chain loops right here are also hanging down. I like the fact that our safety chain loops here are behind our hitch pins and below the receiver, because if you have a large locking device to secure your ball mount, sometimes if your safety chain loops are in this area here your hitch pin covers it up, and it makes it more difficult to attach your safety chain loops. When they're in this location here, it is easier for you to use. more
10/17/2016 11:27:16 AM
Trailer Hitch Installation - 2016 Audi Q5 - Curt- Video
Today on our 2016 Audi Q5, we're going to be taking a look at and installing Curt Class 3 trailer hitch receiver, Part Number C13136. Here's what this hitch is going to look like once it's installed on the vehicle. As you can see, it's pretty well hidden and tucked away underneath here. You can see the receiver tube opening and, if you're at a low enough angle you can see a little bit of the cross tube. It maintains an overall very clean look on the vehicle. . This hitch features a two inch by two inch receiver tube opening with a nice welded on reinforcement collar around it. more
10/14/2016 11:41:28 AM
Best 2016 Audi Q5 Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2016 Audi Q5. Up top we've got the CURT, part number C13136. Then on bottom we've got the Draw-Tite, part number 75940. The first obvious difference between these two hitches is that, as you can see, they look very different from each other. Although they look very different and mount up differently, they're going to come out in about the same position on the vehicle. On the CURT, when it's mounted on the vehicle, you are going to be able to see this crosstube a little bit but it's also tucked back underneath the vehicle far enough that it's not going to be very noticeable. You should have enough room with most of your class three accessories without having to worry about them hitting the rear of your vehicle. more
9/30/2016 11:06:15 AM
