Toyota Trailer Hitch Ball Mount Installation And Review Videos
Test Fitting the etrailer Ball Mount with Pre-Torqued 2" Ball - 2022 Toyota Tacoma- Video
How's it going neighbors This is Ed here with etrailer.com and we're taking a look at the Etrailer 10,000 pound ball mount with two inch ball on our 2022 Toyota Tacoma. What's cool about this ball mount is the fact that you have the black nickel finish that's gonna hold up against corrosion and hide some of the damage and blemishes it'll receive being underneath a coupler. And the your ball is already pre-torqued onto the ball mount right out the box, so you can just stick it directly in your receiver. Our ball mount has a black powder coated finish that's nice and thick, that's gonna protect against rust and corrosion. And ultimately once that powder coat chips underneath, there is an e-coat to protect the metal against rust and corrosion as well. The black nickel finish is also shared with the pin and clip that's included to give it kind of a nice look, but at the same time kind of hide those imperfections that these stretch points have just from its natural function. more
Watch Video
6/17/2024 11:16:43 AM
How's it going neighbors This is Ed here with etrailer.com and we're taking a look at our etrailer 7,500 pound 2" Pre-Torqued Ball Mount on our 2022 Toyota Tacoma. The good thing about the ball mount here is the fact that right off the box, you're gonna have your ball installed and it's pre-torqued to the necessary spec to safely pull up to 7,500 pounds. If you happen to need the 2" rise instead of the 2" drop that the configuration is here, you can go with the alternative that's pre-torqued in the rise position. As far as the ball itself, it has a black nickel finish that's gonna hold up against corrosion and also hide those scuffs and scars from being towed and used out there in in the real world. The ball has a black nickel finish that's gonna hold up against corrosion and also cover up the scars and scrapes that the ball's gonna pick up from being towed. Another accessory or item that you would wanna buy with a ball mount is gonna be ball grease is gonna be ball grease to help lubricate the pivot point right here for your trailer. more
Watch Video
6/17/2024 11:15:30 AM
Fit Check - etrailer 4" Drop Ball Mount with Pre-Torqued 2" Ball - 2022 Toyota Tacoma- Video
How's it going, neighbors This is Ed here with etrailer.com, and we're taking a look at the etrailer 7,500 pound ball mount with four-inch drop on our 2022 Toyota Tacoma. The thing that stands out most about our ball mount from etrailer is the fact that our ball has a black nickel finish that it also shares with the pin and clip. What that's gonna do for you beyond just hide against corrosion, is also going to help conceal some of the scarring and marks that it's gonna catch just from being underneath the coupler. Another thing that would help with that is also having a ball grease here at this pivot point. Another cool thing right out the package it's pre-torqued from the factory, so when you receive it, you can just throw it in your receiver and get to towing. Our ball mount has a four-inch drop and 2 and 3/4-inch rise if you ever need to flip it over. more
Watch Video
6/17/2024 11:11:46 AM
How's it going neighbors This is Ed here with etrailer.com and we're taking a look at the Etrailer 7,500 pound ball mount with 2 and 5/16 inch ball on our 2022 Toyota Tacoma. So what's cool about the Etrailer ball mount is the fact that it has this black nickel finish on the ball, one, and two is the fact that it's pre-torqued, right out the box. So it's gonna come to your house where you can just throw it into your receiver and get to towing. Generally a 2 and 5/16 ball is gonna be used for a camper. So this will help you with those types of things. And some utility trailers 'cause in trailers, people kind of use whatever parts. more
Watch Video
6/17/2024 11:10:20 AM
B and W Tow and Stow 3-Ball Mount Review - 2020 Toyota Tundra- Video
Hey everybody, how's it going Today we're gonna be going over and show you how to install the B&W tow and stow ball mount, here on our 2020 Toyota Tundra. So our installation today is gonna be very simple. We're just gonna simply take our ball mount assembly. This is how it looks when it comes outta the box. So we can just install it directly like this. So we're just gonna line it up with the hitch pin hole there in our receiver. more
Watch Video
4/5/2022 1:12:18 PM
Diversi-Tech Adjustable Ball Mount Review - 2012 Toyota 4Runner- Video
Today on our 2012 Toyota 4runner, we'll be test fitting the Deversi Tech Ball Mount, 6 inch drop or 7 inch rise, rated at 10,000 pounds, part number DTALMB6600. Now before I begin our test fit, we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the anti-top of the receiver tube. Our measurement is 19 inches. This measurement may vary do to tire size, hitch style or after market accessories. Now to begin our test fit, we'll slide the shank of the ball mount in the drop position into the opening of the hitch, line up our pin holes then use the included key to lock the ball mount into the hitch. We can then take the key out and unlock the ball mount itself to adjust the ball mount in the drop position. We can then use the key to unlock the ball mount from the hitch, flip it over into the rise position, lock it into position and then use the key again to adjust the ball mount in the rise position. That completes today's test fit for Deversi Tech Ball Mount, self locking adjustable aluminum ball, 6 inch drop or 7 inch rise, rated at 10,000 pounds, part number DTALMB6600 on our 2012 Ford 4runner. . more
Watch Video
7/31/2014 12:56:13 PM
Draw-Tite Ball Mount Review - 2013 Toyota RAV4- Video
Today on our 2013 Toyota Rav4, we will be test fitting the Draw Tite Ball Mount with a 3/4 inch rise or 2 inch drop with a capacity of 7500 lbs., Part #2923. We will begin out test fit by getting our hitch height, this is the measurement from ground to the inside top edge of our receiver tube. So our Rav4's hitch height is about 13 inches. We will now take our ball mount install it in the drop position being sure to line up our pin holes and securing it with a pin and clip. We will not take a measurement from the ground to the top of our ball platform and this will be around 11 inches. Make sure to measure your trailer height when your trailer is level. Measure from the ground to the bottom of the coupler. If your measurement matches ours, this would be a correct fit for you. We will now turn our ball mount to the rise position. more
Watch Video
2/5/2014 12:33:56 PM
Curt Tri-Ball Mount Review - 2013 Toyota RAV4- Video
Today on our 2013 Toyota Rav4 we will be test fitting the Curt Tri-Ball Mount Hollow 2" Shank, Part #C45001. To begin our test fit, we'll measure our hitch height from the ground to the inside of the top receiver tube of our hitch. Our measurement here is about 13 inches. We will slide the shank of the ball mount into the receiver tube of our hitch, line up our pin holes, slide through our pin and secure it with a clip. When installed, the height of our ball mount will be equal to our hitch height. Make sure to measure your trailer height when your trailer is level. Measure from the ground to the bottom of the coupler. If your measurement matches ours, this would be a correct fit for you. By removing our pin and clip, we can rotate to the left exposing our inch and 7/8 inch ball. more
Watch Video
2/5/2014 9:28:19 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota RAV4- Video
Today on our 2013 Toyota RAV4, we will be test fitting the Convert-a-Ball cushion ball mount for two inch hitches with three-quarter inch rise, two inch drop and a 10,000 pound towing capacity, part number amsc2. We will begin our test fit by getting our hitch height. This measurement is from the ground to the inside top edge of our receiver tube. It's about 13 inches. We'll install the ball mount In the drop position, sliding the shank of the ball mount into the receiver tube of the hitch, line up our pin holes and secure it with a pin and clip. To get our measurement, we'll measure from the ground to the top of the ball platform. It's about 11 inches. Make sure to measure your trailer height when your trailer is level. more
Watch Video
2/5/2014 9:28:01 AM
Curt Tri-Ball Mount Review - 2013 Toyota Sienna- Video
Today on our 2013 Toyota Sienna we'll be testing fitting the Tri-Ball Mount from Curt for 2-inch hitches. Part number C45001. Before we begin our test fit, we will first obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style or after-market accessories. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with a pin and clip. more
Watch Video
1/10/2014 11:25:11 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota Sienna- Video
Today on our 2013 Toyota Sienna, well be test fitting the Convert-A-Ball Cushion Ball Mount for 2 inch hitches with a inch rise or 2 inch drop, rated at 10,000 pounds, part number AMSC2. Before we begin our test fit, well firstly obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11-1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style or aftermarket accessories. Well begin our test fit in a drop position by sliding the shank of the ball mount into the opening of the hitch. more
Watch Video
1/3/2014 7:54:04 PM
Draw-Tite Ball Mount Review - 2013 Toyota Sienna- Video
Today on our 2013 Toyota Sienna we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or a 2 inch drop rated at 7,500 pounds, part number 2923. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height might vary due to tire size, hitch style or aftermarket accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. more
Watch Video
1/3/2014 10:56:54 AM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Toyota Sienna- Video
Today on our 2013 Toyota Sienna we'll be test fitting the Convert-A-Ball cushioned ball mount for 2 inch hitches with a 1 inch rise or a 2 inch drop rated at 14,000 pounds, part number AMSC2HD. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 11 1/2 inches. Keep in mind your hitch height may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. We'll then secure it with the pin and clip. more
Watch Video
1/3/2014 10:55:54 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2008 Toyota Tundra- Video
Today on our 2008 Toyota Tundra, well be test-fitting the Convert-A-Ball cushion ball mount for two-inch hitches with a three-quarter inch rise or a two-inch drop, rated at 10,000 poundspart number AMSC2. To begin our test-fit, we first need to get our hitch heightthis is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of nineteen and a quarter inches. Well slide the shank of our ball mount into the receiver tube of the hitch, line up the pin hole, and install our pin and clip. Now well take a measurement from the ground to the top of our ball platform. We get a measurement of seventeen and a quarter inches. Make sure that when you measure your trailer height, you want to do it when your trailer is level. more
Watch Video
1/2/2014 11:25:00 AM
Draw-Tite Ball Mount Review - 2008 Toyota Tundra- Video
Today on our 2008 Toyota Tundra we'll be test fitting the Draw-Tite ball mount with a 3/4 inch rise or a 2 inch drop rated at 7,500 pounds, part number 2923. To begin our test fit we first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19 1/4 inches. Now we'll take our ball mount and install it in the drop position. We'll need to line up our pin holes and then insert our pin and clip. We'll take another measurement from the ground to the top of our ball platform. more
Watch Video
1/2/2014 11:22:51 AM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2008 Toyota Tundra- Video
Today on our 2008 Toyota Tundra will be tested in the Covert-A-Ball Cushioned Ball Mount for 2-inch hitches with a 6-3/4 inch rise or an 8-inch drop rated at 10,000 lbs, Part #AMSC8. To begin our test fit we first need to get our hitch height; this is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19-1/4 inches. We'll now take our ball mount and install it in the drop position. We'll slide the shank of our ball mount into the receiver tube of the hitch, line up our pin hole, and install our pin and clip. We'll now take a measurement from the ground to the top of our ball platform. We have a measurement of about 11 inches. When measuring your trailer height you want to measure it when your trailer is level. You'll measure from the ground to the bottom of your coupler. If your measurement matches ours, then this would be a good fit for you. We'll flip it over to the rise position, and we now have a measurement of 25-3/4 inches. Again, if your measurement matches ours, this would be a good fit for you. And that completes today's test fit for the Covert-A-Ball Cushioned Ball Mount for 2-inch hitches, Part #AMSC8 on our 2008 Toyota Tundra. more
Watch Video
1/2/2014 11:16:58 AM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2008 Toyota Tundra- Video
Today on our 2008 Toyota Tundra, we'll be testing the convertible cushion ball mount for 2-inch hitches, with a 1-inch riser 2-inch drop, rated at 14000 pounds, part number AMSC2HD. To begin our test fit, we first need to get our hitch height. This is the measurement from the ground to the inside top edge of our receiver tube. We have a hitch height of 19 and a quarter inches. Now we're going to install our ball mount in our drop position. We'll slide the shape of our ball mount into the receiver tube of the hitch. We'll line up the pin hole, and install our pin and clip. We'll take a measurement from the ground to the top of our ball platform. more
Watch Video
1/2/2014 5:17:46 AM
MaxxTow Adjustable-Height Ball Mount Review - 2013 Toyota Tundra- Video
Today on our 2013 Toyota Tundra well be test fitting the Max Tow adjustable height ball mount for two inch hitches with a ten inch drop or eight inch rise rated at 5,000lbs part #: MT70067. Before we begin our test fit we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and well get a measure of about 19 inches. This measurement may vary due to hitch style, tire size or any other after-market accessories that will alter the hitch height of the vehicle. To begin our test fit in the rise position well slide the shank of the ball mount into the opening of the hitch, line up our pinholes and secure it with the pin and clip. We can then adjust the height of the ball platform to the highest spot on the ball mount. more
Watch Video
6/19/2013 4:40:17 PM
Andersen Rapid Hitch Ball Mount Review - 2013 Toyota Tundra- Video
Today on our 2013 Toyota Tundra, we'll be test fitting the Andersen Rapid Hitch ball mount, part number AM3410. But before we can test fit our ball mount, first we want to measure the hitch height of our vehicle. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/4". To test fit our ball mount, we'll insert it into the receiver tube of our hitch, line up the hitch pin holes, and secure it with the pin and clip. When we measure from the ground to the top of the ball platform, we get 19-1/2". more
Watch Video
6/18/2013 3:18:53 PM
Draw-Tite Ball Mount Review - 2013 Toyota Tundra- Video
Today on our 2013 Toyota Tundra, we're going to be test fitting the Draw-Tite ball mount, part number 2923. Before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8". Now we'll test fit the ball mount. First we'll place it in the drop position. more
Watch Video
6/17/2013 5:46:16 PM
Convert-A-Ball Cushioned Pintle Hook Combo Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, we will be test fitting the converter ball cushioned pintle hook combo with three nickel-plated balls for two-inch hitches, rated at 16,000 pounds, part number PH2. Now, to begin our test fit, we will simply slide the shank into the opening of the hitch and secure it with the pin and clip. To access the pintle or to insert one of the three nickel-plated balls, we will undo the gold safety pin on the bottom of the shank and we will pull out on the silver, spring-loaded button to lift up on the U-shaped bar at the top of the pintle hook. Then, twist it to expose a silver cylinder for our pintle or we can remove that to insert one of our three nickel-plated balls. Now, since this pintle hook has no rise or drop, if your trailer ride height matches your hitch height, this should be an appropriate pintle hook for you. That completes todays test fit of the converter ball cushioned pintle hook combo with three nickel-plated balls for two-inch hitches, rated at 16,000 pounds, part number PH2 on our 2013 Toyota Tundra.. more
Watch Video
6/17/2013 5:42:46 PM
Convert-A-Ball Dual-Cushioned Adjustable Ball Mount Review - 2013 Toyota Tundra- Video
Today on our 2013, Toyota Tundra, we will be test fitting the converter ball dual- cushioned adjustable ball mount with a seven-inch rise or nine-inch drop, threaded at 5,000 pounds, part number CAB-UM. Now, before we begin our test fit, we will first need to obtain a hitch height of our vehicle, which is the measurement from the ground to the inside top of the receiver tube and we will get a measuring of 19 inches. Now, to begin our test fit and the draw position, we will slide the shank of the ball mount into the opening of the hitch and secure it with a pin and clip. Now, this ball mount is adjustable, so the ball mount platform at its lowest position, we will measure from the ground to the top of the ball platform and we will get a measurement of about nine inches. If the hitch height of your vehicle matches the hitch height of our vehicle and your trailer ride height matches this measurement, this would be an appropriate ball mount for you. We will now flip the ball mount over into the rise position and with the ball mount platform at its highest point, we will measure from the top of the ground to the ball platform and we will get a measurement of about 28 inches. more
Watch Video
6/17/2013 5:40:56 PM
Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, we are going to be test fitting the convertible cushioned six-way ball mount, part number CAB-6W, but before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8 inches. We will go ahead and insert the ball mount with the receiver tube of our hitch lined with the hitch pin holes and insert our pin and clip. The six-way provides three different ball sizes; one is 7/8ths, 2 inch and 2-5/16 inch, as well as the ability to use a inaudible 00:00:33ring spade or inaudible 00:00:36 and connect it to this ball mount. There is no rise or drop involved with this ball mount, so the trailer height will measure the same as our hitch height, 19-1/8 inches. more
Watch Video
6/17/2013 5:40:28 PM
Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, we are going to be test fitting the convertible cushion ball mount part number AMSC-8, but before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we will measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/8 inches. To measure our new ball mount, first well mount it in the draw position. We will insert the ball mount into the receiver tube of the hitch, install the pin and the clip. Now, we will go ahead and take our first measurement of the ball mount in the drop position. more
Watch Video
6/17/2013 5:39:18 PM
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, well be test fitting the Covert-A-Ball Ball Mount, Part Number AMSC2HD. But before we can test fit our ball mount, first we want to measure the hitch height of our vehicle. The hitch height of our truck is 19-1/8 inches. Thats the measurement from the ground to the inside top edge of our receiver tube.To test fit our ball mount, were going to insert the end of the receiver tube of the hitcher, well line up the hitch pinholes and secure the draw bar with the pin.In the drop position, the ideal trailer coupler height would be 17-1/4 inches. Now, well go ahead and flip it over to our rise position. In the rise position, an ideal trailer coupler height would be 20 inches.Keep in mind that when you measure your trailer height, makes your trailer is leveled first. more
Watch Video
6/17/2013 5:38:07 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, were going to be test fitting the Covert-A-Ball Cushioned Ball Mount, Part Number AMSC2. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 19-1/4 inches.To fit our ball mount, first were going to use it in the drop position. Well insert the ball mount into the receiver tube of our hitch, line up the hitch pinholes and secure it with a pin and a clip.Now, well go ahead and take a measurement to see what trailer coupler height it would work with. In the drop position, we have a measurement of 17-1/4 inches from the ground to the top of the ball platform.Make sure when measuring your trailer height, you do it when your trailer is leveled. more
Watch Video
6/17/2013 5:37:11 PM
Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2013 Toyota Tundra- Video
Today, on our 2013 Toyota Tundra, were going to be test fitting the Covert-A-Ball Cushioned Ball Mount, Part Number AMSC10. But before we can begin our test fit, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. For this vehicle, our hitch height is 19-1/4 inches.To test our ball mount, first were going to mount it in the drop position. Well insert the shank of the ball mount into the receiver tube of the hitch, well line up the hitch pinholes and secure the ball mount with a pin and a clip.Next, well measure from the ground to the top of the ball platform. Our measurement comes in at nine inches. more
Watch Video
6/17/2013 5:36:00 PM
Draw-Tite Ball Mount Review - 2006 Toyota Sienna- Video
Today on our 2006 Toyota Sienna, well be test fitting the Draw-Tite Ball Mount with three quarter inch rise or two inch drop rated at 6,000 pounds, part number 2923. Now before installing our ball mount, well first need to get our hitch height measurement. To do this, well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches. Now keep in mind that measurement can change due to hitch style, tire size or any other accessories which may change your vehicles ride height, so its a good idea to measure yours. Well now slide the ball mount shank into the hitch, line up the hitch pin hole and install our hitch pin and clip and with that our ball mount is secured to the vehicle in the drop position. more
Watch Video
1/14/2013 12:55:59 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2006 Toyota Sienna- Video
Today on our 2006 Toyota Sienna, well be test fitting the Convert-A-Ball Cushioned Ball Mount for 2 Inch Hitches with three quarter inch rise or two inch drop. This ball mount is rated for 10,000 pounds. Part number AMSC2. Now to being our test fit well need to get our hitch height measurement. To do this well measure from the inside top edge of the receiver tube to the ground. Now on this vehicle that measurement is 11 and three quarter inches. more
Watch Video
1/14/2013 12:55:55 PM
Curt Tri-Ball Mount Review - 2007 Toyota 4Runner- Video
Today, on our 2007 Toyota 4Runner, we'll be test fitting the Curt Tri-Ball Mount, part number C45001. Before we begin out test fit, we will need to obtain a hitch height for our vehicle. This is the measurement from the ground to the inside top of the hitch tube. Ours is about 17 inches. Slide the shank into the opening of the receiver hitch tube. Align the pinhole. more
Watch Video
1/11/2013 10:16:19 AM
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2007 Toyota 4Runner- Video
Today on our 2007 Toyota 4 Runner well be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC4. Before we begin our test fit we will need to get a hitch height for this vehicle. This is the measurement from the ground to the inside top of the hitch tube. Our measurement is about 17 inches. Well now go ahead and slide the shank of the ball mount into the receiver tube of the hitch in its drop position, line up the hitch pin hole, slide the pin through the pin hole and secure it with the clip. The measurement from the ground to the top of the ball platform in the drop position is about 13 inches. more
Watch Video
1/10/2013 10:34:49 AM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2007 Toyota 4Runner- Video
Today on our 2007 Toyota 4 Runner well be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC2. Before we begin our test fit we will need to get a hitch height for this vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is about 17 inches. We will now slide shank into the opening of the receiver tube in the drop position, align the pin hole, slide the pin through the pin hole and secure with the clip. We will now measure from the ground to the top of the ball platform and our measurement is about 15 inches. more
Watch Video
1/10/2013 10:34:47 AM
Draw-Tite Ball Mount Review - 2012 Toyota RAV4- Video
Today on our 2012 Toyota Rav4 well be test fitting the Draw Tite ball mount, part number 2923. The first thing we want to do is measure our hitch height and that measurement goes from the ground to the inside top edge of our receiver tube. Our hitch height measures about 13 inches. Keep in mind that this measurement will vary depending on the model of hitch installed, the tire size, or variances in the vehicle themselves. Next well fit the ball mount into the drop position. This ball mount provides a two inch drop so when we measure the height of our ball platform it should be two inches than our hitch height. more
Watch Video
10/9/2012 8:55:46 AM
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Toyota RAV4- Video
Today on our 2012 Toyota Rav4 well be test fitting the convert-a-ball cushion ball mount, part number AMSC4. The first thing we need to do is measure our hitch height. Thats the measurement from the ground to the inside top edge of the receiver tube. Our hitch height measures about 13 inches. Keep in mind that this measurement will vary depending on the model of hitch installed, the tire size, or variances in the vehicle themselves. Now this ball mount offers a four inch drop or a two and three-quarter inch rise. more
Watch Video
10/9/2012 8:54:16 AM
Draw-Tite Ball Mount Review - 2012 Toyota Sienna- Video
Today on our 2012 Toyota Sienna well be test fitting the Draw Tite Ball Mount, part number 2923. First we want to go over measurement on the vehicle. We want to measure the hitch height. Thats from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches. more
Watch Video
9/25/2012 10:06:06 AM
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Toyota Sienna- Video
Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches. more
Watch Video
9/24/2012 2:16:27 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Toyota Sienna- Video
Today on our 2012 Toyota Sienna, we'll be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. First, we want to go over measurement on the vehicle. We want to measure the hitch height. That's from the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will differ depending on exact model, tire size, or any aftermarket add-ons. The hitch height on our particular Sienna with this particular hitch measures in at 12 inches. more
Watch Video
9/24/2012 2:16:01 PM
Draw-Tite Ball Mount Review - 2012 Toyota Highlander- Video
Today were working with the 2012 Toyota Highlander and were going to be test fitting the Draw-Tite ball mount, part number 2923. First, we want to take a hitch height measurement. Thats from the ground to the inside top edge of the receiver tube. On this particular vehicle its 14-3/4 inches. Keep in mind this measurement may vary depending on the model of the vehicle, hitch height, or tire size so make sure to measure your particular vehicle when shopping for a ball mount. First, well mount this ball mount in the drop position. more
Watch Video
8/15/2012 1:06:34 PM
Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Toyota Highlander- Video
Today were working with a 2012 Toyota Highlander and were going to be test fitting the Convert-A-Ball cushioned ball mount, part number AMSC4. Now, this ball mount provides a 2-3/4 inch rise or a 4 inch drop. First, well measure the hitch height of our Highlander, thats from the ground to the inside top edge of our receiver tube. Our example measures 14-3/4 inches tall. Now, keep in mind this measurement will vary depending on the different models, tire sizes, or hitches available for these vehicles. With a 14-3/4 inch hitch height, we probably wont want to use this ball mount in the drop position as it would set us down about 10 inches from the ground. more
Watch Video
8/15/2012 1:06:23 PM
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Toyota Highlander- Video
Today on our 2012 Toyota Highlander were gonna take a quick look at the Convert-A-Ball cushioned ball mount part number AMSC2. First thing were going to do is take a measurement from the ground to the inside top edge of our receiver tube. This measurement is known as the hitch height. The measurement may vary a bit depending on tires or after market modifications to the vehicle so make sure to measure your own vehicle. Our hitch measures 14-3/4 inches high. Well first take our ball mount and mount it in the drop position using a pin and clip. more
Watch Video
8/15/2012 1:06:08 PM
1
Filter Videos
Filter Videos
