Summer Starts Here - Save up to 70%
Draw-Tite Trailer Hitch Installation - 2010 Hyundai Genesis- Video
Andy: Hello everyone, Andy here with etrailer. Today we're going to take a look at the Draw-Tite Class II inch and a quarter trailer hitch on our 2010 Hyundai Genesis. This trailer hitch is going to be a great option if you're needing to, let's say, add a bike rack or a cargo carrier just to free up that extra space in your vehicle. This would be a great choice for that. Also, it does have the capacity to tow a small trailer as well.So whenever you're adding accessories like a bike rack or a cargo carrier, this can accept a tongue weight rating of up to 300 pounds, so that would mean the carrier or rack plus the load that it's going to be carrying. Also, it can accommodate a towing trailer weight capacity of 3,500 pounds. more
1/11/2021 11:27:37 AM
Trailer Hitch Installation - 2011 Hyundai Genesis - Curt- Video
Speaker 1: Today on our 2011 Hyundai Genesis, we're going to be taking a look at and showing you how to install a class two trailer hitch receiver, part number C12086.This is what our hitch looks like when it's installed. The cross tube is visible however it does have a rounded curve to it, to match the contour of the vehicle. It's gonna be a class two, it's going to be inch and a quarter by inch and a quarter. Hitch pin hole is going to be half inch in diameter. It's going to have a plate style safety chain hook up. You can see the safety chain loops are good size to accept different sized safety chain hooks. more
5/18/2018 12:47:11 PM
Trailer Hitch Installation - 2015 Hyundai Genesis - Curt- Video
Today in our 2015 Hyundai Genesis sedan, we will be installing the Kirk trailer hitch receiver class 2, inch an a quarter diameter, part number C12086. All right. Here's what our hitch looks like installed on the back of our Hyundai Genesis sedan. As you can see it's a very clean installation with very minimal hanging down below the bumper at all. The only part we really see is the inch and a quarter receiver itself. The round tubular construction of the frame here, which is a nice gloss black powder coated finish, so it provides a very OEM look to the vehicle. Here's our safety chain plate right here. more
6/14/2016 3:24:52 PM
Trailer Hitch Installation - 2009 Hyundai Genesis- Video
Today on this 2009 Hyundai Genesis we are going to install part number 36486 from Draw-Tite. This is also going to apply to part number 90196 from Hidden Hitch. This is what the hitch looks like on the vehicle, we will give you some measurements. From the top of the receiver opening down to the ground is going to be 9 inches on this particular vehicle and from the center of the hitch pin hole to the outside edge of the bumper is going to be six inches. 00:23 more
1/19/2011 11:49:58 AM
Trailer Hitch Installation - 2009 Hyundai Genesis C12086- Video
Today we are going to install part number 12086 from Curt, and this is a 1-1/4 inch receiver hitch. And we are going to install this on a 2009 Hyundai Genesis. First off, we will show you where the hitch mounts up on the frame. We are looking underneath the passengers side of the vehicle, and we are up by the exhaust and heat shield. That little flat spot between the two is where the hitch actually mounts up on the frame. What is going to happen is, we are going to have to lower the exhaust out of the way. Then we take the heat shield down, and then we are going to put our hitch up into position. We are going to mark our holes to mount it with and then take it back down. Then we will drill out hour holes, install our hardware, and put everything back together - plus making a cutout for the exhaust shield. And this is going to be identical on both sides of the vehicle. more
8/14/2009 3:12:42 PM
Filter Videos
Filter Videos
