Rhino Rack Roof Rack Review - 2013 Cadillac SRX- Video
Today, on our 2013 Cadillac SRX, we will be test fitting the Rhino-Rack roof rack using part numbers RRVA118B-2 for the vortex crossbars, front and rear, and part number RRSX001 for the rail leg kit as you can see here. To begin our test fit I will go ahead and show you how to slide this onto our crossbar. You'll want to make sure that this is face up like this and it feeds in through the notch part like that. We'll go ahead and feed that through. It should slide, there we go, slide right on in. We're going to go ahead and leave our end-cap off for now, that way we can access or tightening device inside. With our front crossbar already installed on our vehicle we can go ahead and throw this over top and set it on our factory raised rails there. Now for our front bar, I've already pushed that all the way up as far as it will go on both sides. So we've got that fixed up there and that way we can have a full adjustment of our load bar in back. more
2/18/2015 3:02:25 AM
