Draw-Tite Max-Frame Trailer Hitch Installation - 2014 Audi Q5- Video
Today we're going to be taking a look at the Draw-Tite Class III Custom-Fit Trailer Hitch Receiver on our 2014 Audi Q5. Now here's what the hitch is going to look like once we have it installed. It's a really clean, almost factory appearance, and that's because the crosstube's going to be completely hidden behind the bumper. And the only thing we're going to see is the receiver tube and the safety chain sticking out. Since it is a Class III hitch, it's going to offer us that two inch by two inch receiver tube opening, which is really going to give us the widest varieties of accessories that we can use for our hitch.Obviously, everybody knows you can put a ball mount in here, tow a trailer, maybe we want to go down to the lake, take a jet ski or a boat with us, but it's also going to allow us to transport some bikes. If we want to take a bike ride with some friends we can put a bike rack in there, or if we just need to make some room on the inside, we can put a cargo carrier back here and lose some of that gear to the outside of our Audi.Regardless of how we're going to be using our hitch, though, all of our accessories are going to mount to the hitch pin hole here on the side. more
5/12/2020 10:02:14 AM
Best 2014 Audi Q5 Trailer Hitch Options- Video
Today we're going to be taking a look at the best hitch options for your 2014 Audi Q5. Up top we've got the CURT, part number C13136. Then on bottom we've got the Draw-Tite, part number 75940. The first obvious difference between these two hitches is that, as you can see, they look very different from each other. Although they look very different and mount up differently, they're going to come out in about the same position on the vehicle. On the CURT, when it's mounted on the vehicle, you are going to be able to see this crosstube a little bit but it's also tucked back underneath the vehicle far enough that it's not going to be very noticeable. You should have enough room with most of your class three accessories without having to worry about them hitting the rear of your vehicle. more
10/3/2016 10:04:26 AM
Trailer Hitch Installation - 2014 Audi Q5 - Curt- Video
Today on our 2014 Audi Q5, we're going to be installing the Curt Trailer Hitch Receiver, part number C13136. Now, here's what our hitch looks like installed on our vehicle. Now, we'll go ahead and give you a couple measurements in helping you choose some accessories for your hitch, such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pin hole to the outermost edge of the bumper is approximately 6 inches. From the top of the opening and the receiver to the ground is approximately 12 inches. Now, let's go ahead and install our hitch. We're going to go ahead and begin here. We're going to remove this center door section before we begin our installation. more
9/12/2014 3:01:22 PM
