Reese Weight Distribution Shank Installation - 2013 Ram 1500- Video
Hi there Ram owners, HEMI 2013 Ram 1500. We're gonna be taking a look at and showing you how to replace your Reese weight distribution shank with the extended nine hole adjustment shank that gives you an additional drop or rise. This is particularly useful after you have lifted your vehicle so that way you can get the appropriate adjustment to match up to your trailer. And this is what our new shank looks like when it's installed. You can see here that we we're able to get a significantly more drop compared to the one that we had removed, and that's thanks to the additional adjustment holes that we've got available on the shank here. This shank's gonna be a great replacement if you are either going to lift your truck or you're purchasing a new truck that just has a much higher ride height than your old one did. more
2/17/2022 1:56:30 PM
Roadmaster Battery Charge Line Kit Installation - 2013 Ram 1500- Video
Rob: Hey everybody. It's Rob here at etrailer.com, and today we're going to take a look at the Roadmaster Charge Line Kit for towed vehicles on our 2013 Ram 1500.Now, if you're going to be towing your Ram behind your motor home, chances are you probably have a supplemental braking system along with all the other components to flat tow it. Well, part of that breaking system, it runs off of the battery on your Ram. So we're not running our Ram when we're towing it so the engine's not running and it's not charging the battery, but the battery is still being used by the braking system, not to mention all the lights. So by the time we're getting where we're going, we had better hope that our battery's not dead, because then we're going to have to worry about finding jumper cables and everything else. But our charge line kit is going to make sure that our battery has a maintenance charge on it the entire time that we're towing. more
8/10/2020 4:07:09 PM
Roadmaster Flexo-Coil Kit Installation - 2013 Ram 1500- Video
Today on our 2013 Ram 1500 we're going to review and install the Roadmaster 7 Wire to 6 Wire Flex Coil kit, part number RM-146-7. Now here's what the round six pin connector is going to look like once it's installed. Also supplied with our install kit, is going to be the umbilical cord that's going to go from your towed vehicle to the tow vehicle. The six round is going to be the silver connector here. It'll plug directly into our six round connector on the vehicle. Then we'll route the other side, which is the seven blade style, to the tow vehicle. more
9/23/2015 10:18:37 AM
