Fifth Wheel and Gooseneck Wiring Harness Installation - 2015 Ford F-250- Video
Today on our 2015 Ford F250, we're going to be installing the draw tight fifth wheel goose neck wiring harness, with he seven pole end. Part number is 20110. Here's what the wiring kits going to look like. Were going to have the single plug, that's going to plug into the backside of our seven way plug that will be in the bed of the truck. Then we've got our two plugs, this is going to act as a connector, so when we separate our factory tow harness under the vehicle, one side's going to plug into one side of it, the other end to the other, and our connections are going to be made. Its really simple, a really easy thing to get installed. more
7/28/2015 2:04:15 PM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2015 Ford F-250- Video
All right today, on this 2015 Ford F-250 Super Duty, we're going to show you the Hopkins Endurance 5th Wheel and Gooseneck 90 degree Wiring Harness. With the seven pull connector. Part number 41157. Okay we have our parts laid out in our truck. We're going to go ahead and cover the features of it before we install it. First off, there's two OEM connection points, which basically T's off into your seven pull connector, but it's located in the bumper of the truck. You've got a generous length of wire lead. So you can put this anywhere you want on the inside bed of your truck. more
4/24/2015 12:57:48 PM
Trailer Wiring Harness Installation - 2015 Ford F-250- Video
Today on our 2015 Ford F250 Super Duty, we'll be installing the Bargman 5th Wheel Gooseneck 90 Degree Wiring Harness with 7 pole plug, part number 50-97-410. Now we need to find a suitable mounting location for our 7 pole here up in our bed. We're going to go in this general area. I like this section right here because it does stick out a little bit, so it gives you a little extra room between the side of your bed. Go ahead and get it in the general area, then we'll go ahead and take our quarter inch bit, make a pilot hole, then we can go ahead and drill out our 2 inch hole with our hole saw. You do want to be careful when drilling here, as you don't want to go too far and hit the outside of the bed of your truck. Now that we have our pilot bit drilled, we can go ahead and cut out our 2 inch hole with our hole saw, then we can go ahead and feed our wires down underneath our vehicle. Now we'll go ahead and vacuum up our shavings and we can go ahead and start feeding our wires underneath. more
4/14/2015 6:03:28 AM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2015 Ford F-250 PK11893-11932- Video
Today on this 2015 Ford F250 Super Duty Crew Cab we're going to install part number PK11893-11932. This is the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole Connector. Now to start off we need to do a little bit of pre-assembly with our wire harness. First off these ends need to be installed into this socket right here. Now what we're going to do is just simply copy the other end of it right here. If you can take a close look these guys are numbered one, two, three, four, five, six, and seven. more
9/23/2014 2:06:16 PM
