Trailer Wiring Harness Installation - 2014 Toyota Sienna- Video
Today in our 2014 Toyota Sienna, we'll be installing a Tekonsha T one vehicle wiring harness with a four pole flat trailer connector. Part number 118498.Speaker 2: Okay, right now we have our wire drake out of our trunk area to the side of our latch. We're going to go ahead and close our trunk. As you can see, we have an adequate length wire to hang down here next to our hitch, to connect to our trailer. Once we hook up to our trailer here, and plug our lighting in our electrical connector, from our trailer into our wiring harness, then we're ready to hit the rode. When we arrive at our destination, we unhook from our trailer, and we're ready to store our wiring back inside the vehicle. We'll plug the dust cover back over our connector here. more
11/4/2016 8:44:46 AM
Trailer Wiring Harness Installation - 2014 Toyota Sienna C56106- Video
Today on our 2014 Toyota Sienna we'll be installing the CURT t-connector vehicle wiring harness with 4-pole flat trailer connector, part number C56106. To begin our install we're first going to open up the hatch. We need to remove the two rear taillight assemblies. Each assembly has two fasteners that will have to be removed in order to take the taillight assembly out. You can make it a little easier if you use a flat blade screwdriver but we're just going to use a plastic trim panel tool, get in between the taillight and the body of the vehicle, gently prying it free. Then we'll go ahead and turn the taillight assembly over. more
1/28/2015 4:44:32 PM
