JR Products Thread Sealant Tape for Gas Lines Review Video

Yes, the Compact Low Pressure 2-Stage Automatic Changeover RV LP Gas Regulator part #37207-31525 can supply up to 262,500 Btu's per hour which will be plenty for a DuroMax XP10000EH Generator. I wasn't able to find the exact Btu requirement…

In order to use the Camco Automatic Changeover 2-Stage Propane Regulator part #CAM59005 you'll need the MB Sturgis Propane Pigtail part #100833-24, one for each tank. This pigtail has an inverted flare fitting which is what you need for the above…

Unless it's a much bigger door, you should only need 1 of the RV Cabinet Door Struts #37270545 per door.

Unfortunately, we don't carry the exact fitting your needing for your Cavagna Regulator. From what I can find about this brand, Cavagna has a slightly different fitting than the standard fittings you'll find on the market. From the reviews of…

I looked up the hose and the regulator you currently have, and found that the GHA7 hose uses an ACME Nut connector to the LP tank and a 1/4 inch male inverted flare that connects to the 3/8 to 1/4 adapter used on the regulator. We offer the necessary…

The MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" #100833-15 is an 1/4" inverted flare tip and your regulator requires a standard 1/4" NPT fitting. You just need a pigtail like Propane…

We offer the necessary replacement pigtails in many lengths for rubber hose, you can use #37207-30755 for a 2 foot length, #37207-30775 for a 3 foot length or #CAM59183 for a 4 foot length. If you'd prefer braided steel hose for durability, use…

I may have another option for you, but unfortunately we do not offer a propane hose with a type 1 connector and a 3/8" male inverted flare. Your best bet is to use the MB Sturgis Propane Pigtail - Type 1 x 1/4" Male Inverted Flare - 2'…

It sounds like you're looking for a Type 1 propane pigtail, which are available in 12" with part #100833-12, 18" with part #37207-30735 or 30" with part #100575-30-MBS; these all have the dark green Type 1 connection that…

Yes, you will want to use some sort of thread sealer like part #LT37482 or pipe tape like part #A05-0265 on the NPT fittings inside of the MB Sturgis Single Stage Propane Regulator part #108072. As a general rule, all NPT fittings should have some…

I think the MB Sturgis Propane Pigtail, #100833-12 is what is needed. You do not state what fittings you have on current hose but most likely are the Type 1 cylinder connection with a 1/4" Male inverted flare. If you have something different…

The MB Sturgis Propane Pigtail #100833-12 that you referenced is rated for 450,000 BTU and 200,000 SCFH (standard cubic feet per hour). I apologize for any confusion on that.