Curt Class I Trailer Hitch Installation - 2021 Chevrolet Trailblazer Video

There is a trailer hitch receiver that fits your 2021 Chevy TrailBlazer, from Curt, and is the following part number: - Curt Trailer Hitch Receiver #C94UR I also wanted to mention, in case you were planning on doing some towing and needed a trailer…

When installing the Curt Trailer Hitch Receiver #C94UR, you need to trim a 2-5/8" wide by 1-3/8" tall square into the underbody panel as seen in the instructions that I attached for you. I also attached a section of the instructions…

Yes the Draw-Tite #DT55GRdoes in fact fit your 2021 Chevrolet TrailBlazer! If you also need a ball mount and wiring I recommend the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit #119250KIT for…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT55GR is our best receiver for your 2023 Chevrolet Trailblazer. This is our only receiver for your Trailblazer which has the 2" opening. This will allow you to use a larger selection of ball…

The trailer hitch receiver I recommend for your 2022 Chevrolet Trailblazer is the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #DT55GR. I recommend the Draw-Tite hitch because it has a 2" receiver which will…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The correct harness is dependent on specifically the taillights in your 2021 Chevrolet Trailblazer. If the taillights are LED's then you would use the T-One Vehicle Wiring Harness #TK26VR. If your taillights are not LED's then you would use…

Yep, you got it; the correct fit for a trailer hitch receiver for your 2023 Chevy Trailerblazer is the Curt Trailer Hitch Receiver #C94UR.

Due to the design of the 2021 Chevy TrailBlazer the only way to install a hitch like the #C94UR would be by removing the rear bumper cover and beam since that just happens to be the only safe and strong enough location for the hitch to mount. There…

The best hitch for your 2023 Chevy Trailblazer is going to be the Curt Trailer Hitch item #C94UR. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class I hitch with a 1-1/4" receiver. It has a 2,000 lbs towing…

For your 2023 Chevy Trailblazer I recommend the Curt Trailer Hitch Receiver #C94UR. This is a Class I hitch with a 1-1/4" receiver. It features a gloss black powder coat finish, a bolt-on installation, and a limited lifetime warranty. Since you…