Titan Chain Diamond Alloy Snow Tire Chains Installation - 2021 Chevrolet Spark Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

The Dexter 8-222 model hubs currently on your trailer are designed primarily for mobile home use, and these types of hubs typically use unique bearing combinations that make it really difficult to find full replacement assemblies. Mobile home parts…

Hey John, thanks for reaching out! We have a variety of ways to get your cargo (and spare!) traveling down the road with you, and part of it just depends on what exactly you're looking to get out if it, along with how much you're…

I do not see that Inno makes a license plate mount for their 39x25 Cargo Carrier with Removable Cargo Box #IN94MR. When I tried to contact them for input they only took my information and never returned my phone call. The Thule License Plate Holder…

Hi Mark; I verified directly with Inno the total combined overall weight is 60-1/2 lbs of the 39x25 Inno Cargo Carrier with Removable Cargo Box for 2" Hitch #IN94MR. The cargo box alone weighs 25 lbs while the base weighs 35-1/2 lbs.

Hey Gabriel, You would need a factory wire harness from Dodge first and could then install the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-33-32 inline with the factory harness to get a 7-way socket in the bed of the truck as well.…