Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Nissan Murano Video

I'm happy to tell you that none of the trailer hitches that fit your 2019 Nissan Murano - the Draw-Tite Max-Frame Trailer Hitch #75952, Curt Trailer Hitch #C13205 or etrailer.com Trailer Hitch #E98907 will interfere with the hands-free liftgate…

No, you do not need to replace the 30 AMP fuse located in your vehicle's fuse box with the provided 10 AMP fuse on the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56267. The extra fuse is provided for…

I would go with the tire size the closest to what you have on the trailer so that you know there wouldn't be any clearance issues at all. Good call in getting rid of the passenger vehicle tires though. That could get dangerous if left on. The…

This question actually comes up quite a bit. The hitch receiver tube and safety chain plate will block the sensors located under the rear bumper in the center. However, the sensors further to the right or left will still function and allow you to…

The AirBedz XUV Air Mattress w/ Built-In Battery-Powered Pump #341030 will fit in your 2020 Nissan Rogue Sport just fine even if the backseats don't fold all the way flat. If you check out the linked video of this on a 2015 Toyota 4Runner…

It is not uncommon for there to be some movement in the system when a trailer is not loaded. If this movement is causing rattle you try adding our Pro Series Anti-Rattle Device for 2" x 2" Trailer Hitch Receivers #PS63091. This device will…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98907 weighs approximately 25lbs and has a maximum gross trailer weight capacity of 3,500lbs and maximum tongue weight 350lbs.

According to the manufacturer, the etrailer brand #e98907 Class III hitch will affect the rear liftgate sensors, but only in that the area right under the center of the bumper. If you try about one foot to either side of the hitch receiver tube, the…

The interior dimensions of the 23" x 51" UWS Cargo Carrier for 2" Hitches #UWS65XR is 20-1/2" x 48 1-/2". As far as a floor, there is not a traditional floor but there are strips of aluminum that line the bottom vertically…

To my knowledge, none of the manufacturers offer cargo carriers in any finishes other than paint or powder coat. I would recommend getting this aluminum carrier #C18113.