Tekonsha T-One Vehicle Wiring Harness Installation - 2016 Ford F-150 Video

For your 2016 Ford F-150 if your trailer does not have brakes all you would need is the part #37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the #37185 and the install harness part #22292. If you…

Where to start with your wiring harness depends on what available connectors you have under the bumper of your 2020 Ford F-150 and also what trailer connector you're looking to add on your truck. If your truck already has the square shaped…

If you want to add a separate 4-pole connector to your F-150 to power the lights in your tool box you can use part #118384. This will simply plug in behind your existing trailer connector, going inline with it. Your existing 4-pole/7-way will remain…

I recommend using the Hopkins Adapter 4-Pole to 7-Pole and 4-Pole, part #37185 for your 2006 Ford Expedition. I have attached a photo of the adapter that shows the wires and what they are used for you can check out. You can find the wires you need to…

I recommend the SumoSprings Solo Custom Helper Springs part #SSR-117-47 instead of part #SSR-117-40 for your 2019 Ford F-150. In regards to the SumoSprings, you will always want to have a safety margin and the above will be perfect for your setup.…

The Truck Bed Cargo Camera for 8" Factory Monitor - Switch Kit part #3460001 does feature a 150 degree angle image and 360 degree adjustable camera. Since your tool box is most likely up against the cab, you can adjust the camera angle to see…

On your 2016 Ford F-150 XLT, since your truck came with the factory 4 way flat, you will want to use the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #C56307 to add those other functions. The Replacement Multi-Tow 7-Way &…

The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part #37185 which your 4-way will plug into and then…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

I recommend the Buyers Products Over-The-Cab Truck Bed Ladder Rack part #3371501150 for the 2019 Chevy Silverado 1500 with 6-1/2 ft bed. It also fits the 5-3/4 ft bed and 8 ft bed. The Buyers Products over-the-cab rack has an easily removable rear…

This adapter plugs into the built-in connector beneath your vehicle's dashboard. To access this connector, first locate the instrument cluster finish panel in the center of you dash, near the driver's side. Carefully pry the panel out and…

There is one light bar from Putco that will work for your 2018 Ford F-250, the Putco Red Blade LED Tailgate Combination Light Bar #P92010-60 which simply plugs into your 4-way. Putco has stated that this system has a new driver which will eliminate…