Tail Light Wiring Kit Installation - 2008 Chevrolet HHR Video

The 18" x 18" x 1" Buyers Products Polymer Outrigger Pad #337OP18X18P does not have a weight rating. These are designed to provide a greater surface area for your trailer jack feet to rest on for better stability so a weight rating…

Yes, the Chevrolet HHR SS is flat-towable with all four wheels down. In order to do so you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may…

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

Yes, the Tow Ready Wiring Harness part #118407 that you referenced has been confirmed to fit your 2008 Chevy HHR. This harness actually fits 2006-2011 HHRs.

I looked up an online version of the owners manual for a 2007 Chevy HHR and found that it can be flat towed. It gives the following steps: First set the parking brake. Then turn the ignition key to ACC to unlock the steering wheel. Next shift into…

To attach the Roadmaster StowMaster 5000 tow bar to your 2009 Mercury Mariner you will need the Roadmaster XL Base Plate Kit, part #4406-1. These base plates will install on your Mariner and once the drawbars are removed, the remaining brackets are…

For your 2007 Chevy HHR you would need a diode kit that has a total of 4 diodes. I recommend you get Roadmaster kit #RM-15267. I attached installation instructions for installing a diode kit onto a vehicle with a combined tail light assembly like…

To flat tow your 2008-2010 Chevy HHR you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and most likely a high-low adapter. For base plates I recommend going with either Roadmaster part…