Extang Trifecta 2.0 Soft Tonneau Cover Installation - 2016 Ram 1500 Video

The Replacement Cargo Management Rail Mounting Hardware for Extang Trifecta 2.0 Tonneau Covers part #EX32FJ comes with four brackets, four two-hole blocks, eight screws, and a torx key. I have attached a photo of everything included below.

None of the methods are super easy. I'd recommend three though you have to remove hinges. This is least invasive, doesn't require cutting the cover, and also doesn't risk damaging cover.

The Replacement Cargo Management Rail Mounting Hardware part #EX32FJ was designed to attach to the cargo management rails that some Toyota trucks have. If your 2023 Toyota Tundra does have that rail then yes this would fit and work great on your…

I'm glad to hear that you received the Rear Tailgate Clamp, #EX31003005, for your Extang Trifecta 2.0 tonneau cover. I called Extang and discovered that they don't have any videos for replacing the rear clamp. But, they were kind enough to…

Demco's 13K Hijacker Autoslide 5th Wheel hitch #DM8550040 will fit the #DM8552030-71 rail kit which does work with your factory air suspension install. However, your truck cannot use a slider hitch. Beds that are 6-1/2-feet can get by with a…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…