Draw-Tite Sportframe Trailer Hitch Installation - 2019 Honda Accord Video

Thank you for the information! It looks like you have the Class I Draw-Tite Sportframe Trailer Hitch Receiver #24972 installed on your 2018 Honda Accord. The RockyMounts MonoRail Solo Bike Rack for 2 Bikes #RKY10007-05 will technically fit the…

We do have hitches that fit the 2019 Acura MDX but the full size spare tire does need to be removed. The P245/50R20 wheel has a 20 inch diameter and all of the hitches available for your vehicle only install with 18 inch or smaller wheel. I recommend…

For your 2018 Acura MDX the aftermarket trailer hitch that will be most similar to the OEM/factory unit is the etrailer.com Class III Hitch #e98840. The primary difference between the OEM hitch for the Acura MDX and an aftermarket model is their…

The Curt Trailer Hitch Receiver #C11525 is a confirmed fit for your 2021 Honda Accord non-hybrid. This is the only hitch available at this time. (April 2023). The Curt will work well for you, and it doesn't require fascia trimming to install it…

We do not have a hitch that will fit for your 2020 Honda Accord Hybrid. Instead, you can carry bikes on a trunk mounted rack or cargo on a roof rack. Both are available for your Honda Accord.

The top of the 1-1/4" receiver opening of Curt trailer hitch #C11525 will be about 11 inches from the ground. You can see this on the attached video. One way to decrease the possibility of bottoming out, will be to obtain accessories with some…

Unfortunately, we still do not have a hitch to fit your 2018 Honda Accord Hybrid. Instead, we can recommend a hitch mounted bike rack or a roof rack to carry bikes or cargo if these would meet your needs.

The torque figures for the fasteners used to install the Curt hitch part #C11525 are in the attached install instructions link on step 6.

Thank you for providing a photo of your Malibu and power chair carrier. Use of ANY type of trailer hitch adapter/extender, such as the Brophy #HT5R that you referenced, will have an undesirable side-effect: it will reduce your hitch's tongue…

For a 1-1/4 inch trailer hitch receiver the hitch pin size needed is 1/2 inch diameter. Whether it is a Class I or Class II trailer hitch like the Draw-Tite #36524 you mentioned, you will use the same size pin and clip like #F-4. If you would like a…

We do not currently, (April 2023) to fit a 2018 Honda Accord Hybrid EX. The Hybrid model was excluded from fit. We do have a trunk mounted bike rack or a roof rack available to carry cargo or bikes. Please let us know how we can help you meet your…

For carrying an E-bike on a 1-1/4 inch hitch the best solution will be the Thule Easyfold part #TH903202 which is specifically designed for heavier E-bikes like yours and would work well. It has a ramp that pulls out to make loading and unloading the…