DeeZee Tailgate Assist Installation - 2008 Ford F-350 Video

The Pop & Lock Custom Tailgate Lock - Power - Black #PAL8250-PL9510 is what you will want for your 2013 F-250 Platinum Crew with 8 foot bed. The kit has not been tested with the Jimmi-Jammer installed so I can't confirm the fit without…

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The Torklift Hitch Extension part #TLE1636 that you referenced can tow a trailer that weighs 6,700 lbs like you what you have but you would need to use a weight distribution system with it to have the needed capacity as without a WD system it's…

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

I do have an option for you but we don't offer replacement circuit boards for any of our electric over hydraulic brake actuators and if I'm being honest here, that is no something you can purchase and replace yourself. If you wish to have…

I do have an option for you but the Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate part #VGD-10-4000 does not have a spot for the factory backup camera. Therefore you would either need to find a way to mount this yourself, go without, or…

The click you are hearing is likely not an indication of a problem. With electric over hydraulic actuators you have to use a brake controller that is compatible with and EOH system such as the P2, #90885 or the P3, #90195. Otherwise the actuator will…

I spoke to the manufacturer and he said that assuming the unit is getting a full 12 volts, the best thing to do would be to bench test it. A 12V power source will be needed to do so. Isolate the wires of the Hydrastar (black, blue, white, yellow) 1.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.