Distance Between Slipper Spring Hangers When Used with Slipper Spring # SP-177275
Question:
With the slipper spring SP-177275 and bolt on hangers, what is the recommended distance between hangers? Thanks,
asked by: Guy
0
Expert Reply:
The distance from the center of the bolt hole on front hanger to the rear hanger for the slipper spring # SP-177275 would need to be 23-1/8 inches.
I attached an FAQ article on slipper spring suspension systems for you to check out as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 1000 lbs
- 1-3/4 Inch Wide
- 2 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 275 inch leaf spring
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Parts Needed For Adding 1,000LB Slipper Springs To a Cart With No Suspension
- Q&A: Availability of Stainless Steel U-Bolts for 1-1/2" Square Axle
- Q&A: Correct Replacement Leaf Springs for Malone Microsport Trailer
- Q&A: Replacement Dexter Axle Disc Brake Calipers that have 89-5 Stamped on Them
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb Capacity
- Article: Trailer Tire Sizing
- Q&A: Are Radius End And Flat End Slipper Springs For A Trailer Interchangeable?
- Article: Most Popular Wheel Bearings
- Article: Rust Prevention